Instruction for Assembly

ManualsBrandsMillwood Pines ManualsDrawer Equipped Sideboards & BuffetsMolimo Sideboard

INSTRUCTION FOR SAFE OPERATION

FURNITURE PRODUCTION

1. The usage of the furniture production released in circulation has to be carried out to

destination furniture products, specified in marking of the instruction for assembly, operation

and leaving.

2. The furniture production delivered in unassembled form has to gather the specialist

in assembly on equal (leveled on level) surfaces according to the instruction for the assembly

including the completing sheet and the scheme of installation enclosed by the manufacturer.

At operation of furniture production it is necessary to exclude hit of water and other

liquids on elements of the products of furniture adjoining to a floor. At installation of sinks,

sinks and furniture products for kitchens, bathrooms their waterproofing in places of contact

with the surface of the case of furniture has to be provided.

4. At installation of products of furniture in close proximity to heating and heating

devices of their surface during operation have to be protected from heating. Temperature of

heating of elements of furniture shouldn't exceed +40 0C.

5. In use products it is necessary to clamp periodically weakened bolt and screw

connections.

6. In case of need movements of a product on the apartment before his shift it is

necessary to exempt it from freight completely. In order to avoid breakage of the available

support to make movement, raising products over floor level. It is recommended to take out

drawers and regiments before shift.

Removal of dust from a product should be made slightly wet or special dry towel

wipes without use of special cleaners.

8. In order to avoid buckling of details and change of color of a product it is necessary

to avoid installation of furniture on direct sunshine.

9. Furniture is recommended to be operated in rooms at a temperature not below +2 of

0C and relative humidity of 45-70%.

10. Static vertical loading isn't allowed (especially with application of effort in one

point): on a bottom of boxes – more than 5 kg; on shelves of cases, racks – more than 10 kg.

Normal effort of open doors – up to 5 kg, effort of drawers up to 5 kg. Load of glass regiments

shouldn't exceed 2,5 kg.

11. It is forbidden to put hot objects on all covers and horizontal surfaces of products.

MANUFACTURER'S GUARANTEE:

Warranty period of operation of a product – 24 months from the date of sale by shop. In

the period of a warranty period the manufacturer guarantees repair of products or their

replacement if the consumer hasn't violated service regulations. The product conforms to

requirements of GOST 16371-93.

Furniture for sitting and lying – 18 months from the date of sale by shop. The product

conforms to requirements of GOST 16371-93, GOST 19917-93.

THANKS FOR PURCHASE!

Instruction for assembly

Dresser

Summary of content (6 pages)

PAGE 1
INSTRUCTION FOR SAFE OPERATION FURNITURE PRODUCTION 1. The usage of the furniture production released in circulation has to be carried out to destination furniture products, specified in marking of the instruction for assembly, operation and leaving. 2.
PAGE 2
Table 1- Complete set No. of poses 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Name of a detail Back wall Bottom of a box Back of a box (small) Left side of a box (small) Right side of a box (small) Façade of a box (small) Back of a box (big) Left side of a box (big) Right side of a box (big) Façade of a box (big) Socle Door Left sidewall Right sidewall Horizontal board Partition Shelf Cover Size, mm Quantity, piece.
PAGE 3
! Separate directing (R-02) on two parts (R-02/1 and R-02/2) by means of pressing of a lever (picture 2) having moved apart a guide. 5. Fix to sidewalls of a box (4, 5, 8, 9) ball guides (R-02/1) by screws of Ø3х16mm (E-01) according to a headdress of Ø3 mm (picture 1). ! Twist screws in the openings extended vertically "", for a possibility of further adjustment of a box in the direction up/down. 6. Install boxes in an aperture on directing (R-02/2 and R-03/2) (picture 3).
PAGE 4
Table 2 – Complete set of accessories A-01 x 22 Ø8х35 Е-01 х 52 Ø3х16 R-02/1 x5 к-т C-01 x 22 ASSEMBLY SEQUENCE B-01 x22 Е-02 x 8 M-01 x6 Ø4х16 R-02/2 x5к-т J-01 x 6 ! Collect a product in the lying position by front edges from top to bottom (picture 1). ! Dowels (A-01) are inserted only after PVA glue has poured in openings.
PAGE 5
picture 10 picture 11 picture 12 Assembly sequence of case ! Collect a product in the lying position by front edges from top to bottom. 1. In openings of Ø15 mm on the B15 мм faces of the following details: 4, 5, 8, 9, 13, 14, 15, 16 – insert eccentrics (V-01) А-01 according to pic. 1. ! Dowels (A-01) are inserted only В-01 after PVA glue has poured in openings. picture 1 ! Free part of the inserted dowel (A-01) shouldn't act concerning a detail end face more than on 12 mm. 2.
PAGE 6
7. Connect a sidewall (14) to collected design above, between themselves, having clamped eccentrics (V-01) (picture 5). 8. Attach a socle (11) to sidewalls (13, 14) according to a headdress of Ø3 mm by means of screws of Ø3x16mm (E-01) (picture 3). R - 02/ 1 9. Attach a cover (18) to sidewalls (13, 14) and a partition (16) then clamp eccentrics (V-01) (picture 5). picture 5 10. Check squareness of a framework on diagonal according to the picture 6.