Instruction for Assembly

! Separate directing (R-02) on
two parts (R-02/1 and R-02/2) by
means of pressing of a lever
(picture 2) having moved apart a
guide.
5. Fix to sidewalls of a box
(4, 5, 8, 9) ball guides (R-02/1) by
screws of Ø3х16mm (E-01)
according to a headdress of Ø3 mm
(picture 1).
! Twist screws in the openings
extended vertically "", for a
possibility of further adjustment
of a box in the direction up/down.
picture
2
R-02/ 1
R-02/ 1
R-02/ 2
picture
3
6. Install boxes in an
aperture on directing (R-02/2 and
R-03/2) (picture 3).
! At the first installation of a box on guides (R-02/2 and R03/2) it comes
into an aperture very hardly – be not frightened it! To develop guides
at installation of boxes make back and forth motions of a box forward
- back (with small pass of a box in the case for a step) until a full
closing. Then do it few times put completely forward and push a box
and the guide is developed.