Instruction manual

R
Pellerin Milnor CorporationPellerin Milnor Corporation
P. O. Box 400, Kenner, LA 70063-0400
Litho in U.S.A.
BMP920007/96067V
(Sheet 1 of 2)
Watts Ball Valves and Repair Kits
BMP920007/96067V (1 of 2)
ADAPTER
BODY SEAL (SSK)
SEATS (SSK)
THRUST WASHER (SK,SSK)
STEM O-RINGS (SK,SSK)
WASHER (SK)
NUT (SK)
STEM (BK)
(SK) PACKING NUT
(SK,SSK) PACKING
GLAND O-RING
BODY
(BK) BALL
6
7
8910
11
12
13
AIR OPERATED BALL VALVES
BALL VALVES WITHOUT ACTUATOR PADS FOR MANUAL OPERATION
STEM (BK)
HANDLE
PACKING
THRUST WASHER
ADAPTER
SEE NOTE
BODY SEAL
BODY
(BK) BALL
SEATS
PACKING
NUT
LOCK NUT
1
2
3
1/2" BRONZE OR 1/2", 3/4" STAINLESS
NO REPAIR KITS
DETAIL
OLD STYLE STEM
PACKING NUT SEAL (SSK) SEE NOTE.
3/4",1"
BRONZE
NO REPAIR KITS
3
5
HOW TO USE THIS DRAWING: The ball valves are separated by size, material, and type of operation. Find the cross section which shows your ball valve (example 1-1/2" bronze air operated). See the parts list for the item number which represents your ball valve (1-1/2" bronze air operated would be item 10 on the parts list). For valves that offer repair kits the internal parts are labled and marked as to which kit they are found in: - (BK) part of Ball Kit - (SK) part of Stem Kit - (SSK) part of Seat/Seal Kit For the part number of the Seat/Seal Kit for item 10 (1-1/2" bronze air operated valve) see the parts list and look for item 10SSK, likewise the Stem Kit will be 10SK.
NOTE:
AIR OPERATED VALVES: (SSK) kits for air operated ball valves include all parts required to repair either our old style or new style stems. A packing nut seal is provided to repair our old style stems which had a seal in the packing nut (see Detail). Our new style stem uses a double o-ring design.
BRONZE & STAINLESS
1",1-1/4",1-1/2",2"
(For Bracketry and Mounting Hardware, See BMP920005. For Air Cylinders
that Operate Watts Ball Valves, See BMP920006.)
163