Instruction manual

R
Pellerin Milnor CorporationPellerin Milnor Corporation
P. O. Box 400, Kenner, LA 70063-0400
Litho in U.S.A.
BMP900031/96081V
(Sheet 1 of 2)
Pressure Regulators
BMP900031/96081V (1 of 2)
TO CLEAN OR REPLACE PARTS:
TO CLEAN OR REPLACE PARTS:
ALL ITEMS MARKED WITH AN ASTERISK (*) ARE INCLUDED IN A REPAIR KIT. FOR A LIST OF AVAILABLE REPAIR KITS, SEE PARTS LIST.
1.Remove spring cage and all parts above diaphragm. 2. Loosen and remove diaphragm lock nut, lock washer, pressure plate, and diaphragm from valve stem. 3. Unscrew seat cylinder from body and remove entire assembly. 4. While disassembled open gate valve to flush out collected sediment.
1. Remove bottom plug and gasket. 2. Loosen disc holder with screwdriver or socket wrench. 3. Inspect disc and clean or replace. 4. Seat can be removed, if necessary, with an allen wrench or socket wrench. 5. Unscrew and remove adjusting screw, check nut, and spring cage screws. Lift off spring cage, spring washer and adjusting spring. 6. Loosen and remove lock nut, washer, plate, and diaphragm. 7. Lift stem assembly upwards to remove from body. 8. To reassemble valve follow above instructions in reverse. Tighten or loosen adjusting screw for the required pressure of 28 P.S.I.
165