Instruction manual

R
Pellerin Milnor CorporationPellerin Milnor Corporation
P. O. Box 400, Kenner, LA 70063-0400
Litho in U.S.A.
Item
Part Number
Description
Comments
Used In
Find the correct assembly first, then find the needed components. The item letters (A, B, C, etc.) assigned to assemblies are referred to in the "Used In" column to identify which components belong to an assembly. The item numbers (1, 2, 3, etc.) assigned to components relate the parts list to the illustration.
Parts List—Water Level Switch Assembly
BMP800186/2002226V
(Sheet 1 of 1)
. ---------------------------------------------------------------------ASSEMBLIES------------------------------------------------------------------
A ELL000MK1 *LIQUOR LEVEL SW ASSY CBW 1 UP + 0 LO B ELL000MK2 *WATER LEV SW ASSY: 1 UP+ 1LO 1 UP + 1 LO C ELL000MK2A *CONVEYOR E-STOP ASSY 1UP-1DN 1 UP + 1 LO D ELL000MK2S *MK2 WATER LEVE SWITCH ASSYSS 1 UP + 1 LO SS E ELL000MK3 WATER LEV SW ASSY:0 UP +1 LO 0 UP + 1 LO F ELL000MK4 *WATER LEV SW ASSY:1 UP +2 LO 1 UP +2 LO G ELL000MK5 $WATER LEV SW:2UP +1LO 2 UP + 1 LO
-------------------------------------------------------------------COMPONENTS------------------------------------------------------------------ A-D,F-G 1 09R014A MINI-SW SPDT STAKON #V15G1C26K B-G 2 09R014A MINI-SW SPDT STAKON #V15G1C26K F-G 3 09R014WS MICROSW SPDT STAKON V3-2101-D8 004-C,E-G 4 02 02150M SW MOUNTPLATE=LEVCONT ZINCPL D only 4 02 02150S PLATE=SWITCH MNT LEVEL S/S all 5 01 10227 LABEL=WATER LEVEL SWITCH ASMB all 6 02 02152 BUSHING=FLOAT LEVER all 7 02 02164 INSULATION=V3-1 MICROSWITCH all 8 02 02190 FLOATLEVER=LEVEL SW A-C-E-G 9 02 02553 BASE=LEVEL CONTROL D only 9 02 02553S BASE=LEVEL CONTROL ENCL S/S A-B-E-G 10 02 02554 COVER=LEVEL CONTROL-PLTD C only 10 02 02554A COVER=CONVEYOR E-STOP-PLATED D only 10 02 02554S WATER LEVEL CONTROL ENCL S/S all 11 15N019 RDMACSCR 4-40UNC2AX5/8 ZINC GR all 12 15U021 LOKWASH EXTOOTH #4 (US STD) ZI A-C,E-G 13 15N055 RDMACHSCR 6-32UNC2AX5/8 ZINC G A-C,E-G 14 15G070 HXMACHSCRNUT 6-32UNC2B ZINC GR D 14 15G075 HEX MACH SCREW NUT 6-32UNC2 S all 15 15U060 FLAT WASHER#6 ANSI TYPEB BRASS A-C,E-G 16 15U100 LOKWASHER MEDIUM #6 ZINCPL D only 16 15U102 LOCKWASHER MEDIUM #6 SS18-8 A-C,E-G 17 15P105 TRDCUT-F PANHD 8-32X5/8 NIKSTL D only 17 15P103 TRDCUT-F RDHDSLOT 8-32UNCX1/2 all 18 15P100 #8 X 3/8 PHILPANHD TYPE B SMS F-G only 19 15N021 RDMACSCR 4-40 UNC2X1 ZINC PLT F-G only 20 03 01462C ANGLE=H20 LEVEL ACTUATOR F-G only 21 15J051 POPRIVET 1/8DIAX.265 LONG S/S
Water Level Switch Assembly
Notes: 1. Disconnect power at main switch before operating this enclosure. 2. Wiring must not interfere with movement of item 8. 3. To order complete water level switch assembly, see items A-G. 4. When item 20 is used in assembly G, flange will be on top (shown).
When item 20 is used in assembly F, flange will be on bottom.
171