SDS

Safety Data Sheet
Material: 60002712
WACKER® AK 350
SILICONE FLUID
Version: 2.2 (US) Date of print: 07/12/2017 Date of last alteration: 11/07/2016
Page: 2/9
4.
First-aid measures
4.1
General information:
Get medical attention if irritation or other symptoms occur. Before seeking medical attention remove contaminated clothing and
shoes. Take a copy of the Safety Data Sheet when going for medical treatment.
4.2
After inhalation
Material cannot be inhaled under normal conditions. No special treatment required.
4.3
After contact with the skin
After skin contact wipe off excess material with cloth or paper. Use a waterless hand cleaner to remove as much of the remaining
material as possible. Wash with soap and water.
4.4
After contact with the eyes
If contact with eyes, immediately hold eyelids apart and flush with plenty of water for at least 15 min.
4.5
After swallowing
No special measures are required after swallowing.
5.
Fire-fighting measures
5.1
Flammable properties:
Property:
Value:
Method:
Flash point............................................................... :
260 °C (500 °F)
(ISO 2719)
Flash point............................................................... :
> 300 °C (> 572 °F)
(ISO 2592)
Boiling point / boiling range ..................................... :
not determined
Lower explosion limit (LEL) ..................................... :
not applicable
Upper explosion limit (UEL)..................................... :
not applicable
Ignition temperature ................................................ :
410 °C (770 °F)
(EN 14522)
NFPA Hazard Class (comb./flam.liquid) .................. :
IIIB
5.2
Fire and explosion hazards:
This material does not present any unusual fire or explosion hazards.
5.3
Recommended extinguishing media:
water-mist , carbon dioxide , sand , dry chemical or alcohol-resistant foam .
5.4
Unsuitable extinguishing media:
water-spray , sharp water jet .
5.5
Special exposure hazards arising from the substance or preparation itself, combustion products, resulting gases
Hazardous decomposition products: carbon dioxide , carbon monoxide , formaldehyde , silicon dioxide and incompletely burnt
hydrocarbons .
5.6
Fire fighting procedures:
Fire fighters should wear full protective clothing including a self-contained breathing apparatus. Cool endangered containers with
water.
6.
Accidental release measures
6.1
Precautions:
If material is released indicate risk of slipping. Do not walk through spilled material.
HAZWOPER PPE Level: D
6.2
Containment:
Prevent material from entering surface waters, drains or sewers and soil. Contain any fluid that runs out using suitable material
(e.g. earth). Close leak if possible without risk.