SDS

Safety Data Sheet
Material: 60002712
WACKER® AK 350
SILICONE FLUID
Version: 2.2 (US) Date of print: 07/12/2017 Date of last alteration: 11/07/2016
Page: 9/9
not be valid for such material used in combination with any other materials or in any process. Such information is to the best of
our knowledge and belief accurate and reliable as of the date compiled. However, no representation, warranty or guarantee
expressed or implied, is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to
the suitability and completeness of such information for his own particular use. We do not accept liability for any loss or damage
that may occur from the use of this information. Nothing herein shall be construed as a recommendation for uses which infringe
valid patents or as extending a license under valid patents. This SDS provides selected regulatory information on this product,
including its components. This is not intended to include all regulations. It is the responsibility of the user to know and comply with
all applicable rules, regulations and laws relating to the product being used.
Vertical lines in the left-hand margin indicate changes compared with the previous version.
All deliveries are subject to the WACKER SILICONES Health Care Policy, which is available at www.wacker.com.
16.2
Glossary of Terms:
ACGIH - American Conference of Governmental Industrial
Hygienists
DOT - Department of Transportation
hPa - Hectopascals
mPa*s - Milli Pascal-Seconds
OSHA - Occupational Safety and Health Administration
PEL - Permissible Exposure Limit
ppm - Parts per Million
SARA - Superfund Amendments and Reauthorization Act
STEL - Short Term Exposure Limit
TSCA - Toxic Substances Control Act
TWA - Time Weighted Average
WHMIS - Canadian Workplace Hazardous Materials
Identification System
Flash point determination methods ........................................
Common name
ASTM D56...................................................................................
Tagliabue (Tag) closed cup
ASTM D92, DIN 51376, ISO 2592 ..............................................
Cleveland open cup
ASTM D93, DIN 51758, ISO 2719 ..............................................
Pensky-Martens closed cup
ASTM D3278, DIN 55680, ISO 3679 ..........................................
Setaflash or Rapid closed cup
DIN 51755 ...................................................................................
Abel-Pensky closed cup
16.3
Conversion table:
Pressure: .................... :
1 hPa * 0.75 = 1 mm Hg = 1 torr; 1 bar = 1000 hPa
Viscosity: .................... :
1 mPa*s = 1 centipoise (cP)