Replacement Part List

SCREW TORQUE SPECIFICATIONS
SEAT TORQUE
FIG. PART NO. WHERE USED (KG/CM) (IN/LBS)
4 06-82-2366 Bail Handle 24±3 20±3
7 06-82-4010 Brake Bar (left side) 15±2 13±2
8 06-82-5004 Handle Cover 26±3 22±3
11 06-82-1087 Connector 5.5±0.5 4±0.5
11 06-82-1087 Micro Switch 5.5±0.5 4±0.5
16 05-88-1210 Brake Bar (right side) 10±1 8±1
21 05-88-1200 Spur Bracket 15±2 13±2
21 05-88-1200 Switch Support 15±2 13±2
21 05-88-1200 Oil Tank 15±2 13±2
25 05-78-5316 Electronics Assembly 15±2 13±2
25 05-78-5316 Dust Cover 15±2 13±2
25 05-78-5316 Spindle/Gear Assembly 15±2 13±2
33 05-55-1001 Rotor Assembly 100±3 86±3
38 06-82-3001 Handle Support 33±3 28±3
65 05-55-5001 Bar Holder 26±3 22±3
= Type ‘J’ Grease, 49-08-4220 (1 lb. can)
= 243 Blue Loctite, 44-22-0095
LUBRICATION:
NOTE
Regarding parts to be lubricated:
Apply a light coating of grease to all highlighted parts shown
prior to installation. Reference
the key above for grease types.
NOTE
Regarding parts to receive thread locking sealant:
Place one to two drops of the recommended Loctite® thread locking
sealent (or the equivelant) to the threads of parts shown prior to
installation.
When servicing, remove 90-95% of the existing grease
prior to installing Type ‘J’. Original grease maybe similar
in color but not compatible with ‘J’.