Service Parts List

FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 45-56-8300 Shoulder Strap (For all three tote models) (1)
2 44-20-8300 Locker Kit (For all three tote models) (1)
or
3 44-20-0305 Locker Kit (For all three tote models) (1)
48-22-8310 10" PACKOUT™(Small) Storage Tote
48-22-8315 15" PACKOUT™ (Medium) Storage Tote
48-22-8320 20" PACKOUT™ (Large) Storage Tote
2
To install a Locker Kit (2), align spring as shown and
guide the tabs of locking carriage in channels of tote
base. Push locking carriage upward to snap into place.
3
To install a new Locker (3), guide the tabs of
locking carriage in channels of tote base.
Push locking carriage forward to snap into
place.
To remove a damaged locker system, flip tote
upside down and approach tote from the bottom
of base. Insert a large flat blade screwdriver in
middle of locking carriage as shown. Lightly pry
carriage upward out of base opening. Remove
and discard old locking carriage and spring.
To remove a damaged locker system, flip tote over on
the side and approach tote from the bottom of base.
Insert a large flat blade screwdriver in middle of lock-
ing carriage as shown. Lightly pry carriage upward
out of base opening. Remove and discard old locking
carriage.
No. 44-20-8300
Locker Kit
For early production PACKOUT™
Storage Totes
No. 44-20-0305
Locker
For later production PACKOUT™
Storage Totes
1
5
SEE DIAGRAMS BELOW TO DETERMINE LOCKER
SERVICE PART NEEDED.