Datasheet

#MILWAUKEETOOL
91
milwaukeetool.co.uk
For further technical specifications, including noise and vibration data, please visit our website: www.milwaukeetool.co.uk
DCM 2-250 C | DIAMOND DRILLING MOTOR
º
Two-speed diamond coring motor
º
Internal slip clutch
º
Triple-reduction gearing
º
Soft start switch
º
Motor overload protection
º
PRCD residual current device
º
Built-in water swivel
º
Dual-mount switch box
º
Supplied with open end wrench, Hex keys and strap with switch box
DR 250 TV | DIAMOND DRILL STAND FOR DCM 2-250 C
º
Light weight drilling rig from aluminium
º
Tilting (0 - 45°)
º
Drill angle and depth display
º
Quick-connect motor plate
º
Integrated vacuum base plate (use with and without vacuum possible)
º
Fine adjustment of feed speed
º
Vertical and horizontal water level
º
Drill hole centering device
º
Leveling screws
º
Feed handle attachable to both sides of rig
º
Supplied with
3
⁄16˝ Hex key, 6 mm Hex key, 17 x 19 wrench, quick-connect
motor plate, 4 pcs. M8 x 25 mm screws, centering device, vacuum rubber
seal
DCM 2-250 C
Power input (W) 2800
No load speed gear 1 (rpm) 450
No load speed gear 2 (rpm) 900
Max. drilling core bit (mm) 250
Tool reception 1
1
⁄4˝ UNC
Weight (kg) 9
Supplied in −
Article Number 240 V 40964
DR 250 TV
Max. drilling core bit (mm) 250
Stroke length (mm) 520
Height (mm) 834
Base size (mm) 276 x 467
Angle capacity (°) 45
Weight (kg) 10
Supplied in −
Article Number 4933400590