M18 ONEIWP12 M18 ONEIWF12 M18 ONEIWF38 Original instructions
6 14 7 M18 ONEIWP12 Text section with Technical Data, important Safety and Working Hints and description of Symbols 11 M18 ONEIWF12 M18 ONEIWF38 10 12 8 4 STOP 9 2 START 13 3
1 Remove the battery pack before starting any work on the machine.
M18 ONEIWF12 M18 ONEIWF38 M18 ONEIWP12 click 1 2 6 7
START Handle (insulated gripping surface) STOP M18 ONEIWP12 M18 ONEIWF12 M18 ONEIWF38 8 min-1 0-900 0-1400 0-1900 0-2500 0-1300 0-2100 0-2550 0-3200 min-1 0-900 0-1400 0-1900 0-2500 0-1300 0-2100 0-2550 0-3200 min-1 0-900 0-1400 0-1900 0-2500 0-1300 0-2100 0-2550 0-3200 9
LOCK 10 11
1 1 2 2 3 + 3V CR2032 4 12 13
TECHNICAL DATA CORDLESS IMPACT WRENCH M18 ONEIWP12 M18 ONEIWF12 M18 ONEIWF38 Production code....................................................................... .......... 4527 54 06... .....................4527 40 06... ............... 4527 47 06... ...000001-999999 ...000001-999999 ...000001-999999 No-load speed .................................................... ......... 0-900 min-1 ...................0-900 min-1 ..................... 0-900 min-1 Impact range ........................................
BATTERIES Battery packs which have not been used for some time should be recharged before use. Temperatures in excess of 50°C (122°F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum life-time, after use, the battery packs have to be fully charged. To obtain the longest possible battery life remove the battery pack from the charger once it is fully charged.
18 19
Copyright 2020 Techtronic Industries GmbH Max-Eyth-Str. 10 71364 Winnenden Germany +49 (0) 7195-12-0 www.milwaukeetool.eu Techtronic Industries (UK) Ltd Fieldhouse Lane Marlow Bucks SL7 1HZ UK (11.
