OPERATOR'S MANUAL New batteries must be charged before first use. The battery is shipped in sleep mode. Cat. No. MXF C, MXF CP203, MXF XC406 WARNING To reduce the risk of injury, user must read and understand operator's manual.
IMPORTANT SAFETY INSTRUCTIONS WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS 11.CHARGER IS RATED FOR 220-240 VOLT AC ONLY. Charger must be plugged into an appropriate outlet. 12.USE ONLY RECOMMENDED ATTACHMENTS.
SYMBOLOGY ADDITIONAL BATTERY SAFETY RULES reduce the risk of fire, personal WARNING To injury , and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater , certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit. not charge non-rechargeable WARNING Do batteries.
MX FUEL™ LI-ION BATTERY PACKS Battery Pack Protection To protect itself from damage and extend its life, the battery pack’s intelligent circuit monitors current draw and temperature.
MX FUEL™ LI-ION CHARGER Charging a Hot or Cold Battery Pack The fast Red Flashing Indicator light on the charger indicates that the battery pack or charger temperature is outside the charging range. Once the battery pack or charger is within the acceptable range, normal charging will take place and the red light will be continuous. Hot or cold batteries may take longer to charge. Li-Ion Charging Status MILWAUKEE® MX batteries in this MILWAUKEE® Li-Ion charger.
WARRANTY - AUSTRALIA and NEW ZEALAND Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to product sold in Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE® prides itself in producing a premium quality product that is Nothing But Heavy DutyTM. Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE® dealer.