Service Parts List

REVISED BULLETIN
SERVICE PARTS
BULLETIN NO.
WIRING INSTRUCTION
DATE
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
CATALOG NO.
MILWAUKEE TOOL
l
www.milwaukeetool.com
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 1
54-04-1005
MX FUEL™ LI-ION BATTERY
MXFCP203, MXFXC406
Aug. 2019
FIG. PART NO. DESCRIPTION OF PART NO. REQ.
1 12-25-0262 Nameplate (Not Shown)
(for Cat. No. MXFCP203) (1)
2 12-25-0263 Nameplate (Not Shown)
(for Cat. No. MXFXC406) (1)
3 10-20-1771 Warning Label (Not Shown)
(for Cat. No. MXFXC406) (1)
FIG. NOTES
1, 2, 3 A clean, dry surface is essential for proper performance
for any adhesive system. The area intended for application
of any adhesive label or nameplate must be prepared by
cleaning with isopropyl alcohol. The solvent is to be
applied with a clean, lint free applicator and the surface
allowed to dry before applying the label or nameplate.
IMPORTANT
To ensure the MXFXC406 battery
is below 300Wh during transport,
the shipping switch must be in
the locked position:
1.Withtheaidofaatblade
screwdriver, pull out shipping
switch tab to the locked position.
2. Install shipping cap 42-70-0086
or secure a cable tie through hole in
the shipping switch tab.
MXFCP203
MXFXC406
2
1
Shipping Switch Tab
shown in ‘locked
position’
Shipping Cap
42-70-0086
Shipping Switch Tab
shown in ‘unlocked
position’ prior to using
screwdriver for sliding
to ‘locked’
Shipping Switch Tab
(Pulled out to locked position)
Shipping Cap
snapped in
place
NOTE:
The shipping instructions
and illustrations listed
below are for the larger
MXFXC406 Battery only!