Installation Guide

Important Note Regarding Water Supply:
Before installation, please ensure that the shut off valve is greater than 7.5" from the
center of the drain to the center of the shut off valve one either side.
Note:
This is a true 12" rough-in toilet from finished wall to center of the drain (no less than 12").
Baseboard thickness may reduce the rough-in dimension.
6
/
1 0
1. Removing Your Old Toilet
2
1
3
4
5
6
7
Flush the toilet to empty the tank, remove any water left in tank or bowl.
Turn off the water supply.
Disconnect the supply line from the tank.
Make sure the water supply valve is shut off before installation.
Remove decorative caps. Unscrew nuts that attach the toilet to the floor.
Remove toilet.
Remove old closet bolts from closet flange. Clean any old wax, putty, etc from
base area.