OWNER'S MANUAL Contents A -Z MINI MINI CLUBMAN Online Edition for Part no.
Cooper Cooper S John Cooper Works Congratulations on your new MINI This Owner's Manual should be considered a permanent part of this vehicle. It should stay with the vehicle when sold to provide the next owner with important operating, safety and maintenance information. We wish you an enjoyable driving experience. Online Edition for Part no.
© 2012 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Reprinting, including excerpts, only with the written consent of BMW AG, Munich. US English X/12, 11 12 500 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling. Online Edition for Part no.
Contents The fastest way to find information on a particular topic or item is by using the index, refer to page 252.
Notes Notes Using this Owner's Manual We have tried to make all the information in this Owner's Manual easy to find. The fastest way to find specific topics is to refer to the detailed index at the back of the manual. If you wish to gain an initial overview of your vehicle, you will find this in the first chapter. Should you wish to sell your MINI at some time in the future, remember to hand over this Owner's Manual to the new owner; it is an important part of the vehicle.
Notes nance and repair methods. Therefore, have the necessary work on your MINI only carried out by a MINI dealer or a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer. If this work is not carried out properly, there is a danger of subsequent damage and related safety hazards.< Parts and accessories For your own safety, use genuine parts and accessories approved by the manufacturer of the MINI.
Notes > California Emission Control System Limited Warranty tion documents the condition of a component, a module, a system or the surroundings: Detailed information about these warranties is listed in the Service and Warranty Information Booklet for US models or in the Warranty and Service Guide Booklet for Canadian models. > Operating conditions of system components, e.g., fill levels.
Notes Event data recorder EDR This vehicle is equipped with an event data recorder EDR. The main purpose of an EDR is to record, in certain crash or crash-like situations such as an air bag deployment or collision with a road obstacle, data that will assist in understanding how a vehicle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
Watch Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
AT A GLANCE Cockpit Cockpit Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Around the steering wheel 10 Online Edition for Part no.
Cockpit 1 2 Adjusting the exterior mirrors, folding them in and out 42 7 AT A GLANCE Buttons on steering wheel, right Resuming cruise control 55 Parking lamps 81 Storing speed and accelerating or decelerating Low beams 81 Automatic headlamp control 81 Adaptive Light Control 82 Activating/deactivating cruise control 55 Turn signals 52 High beams 83 left side Headlamp flasher 52 Roadside parking lamps 83 Increasing or reducing volume Computer 58 Telephone: 3 Tachometer 12 Press: accepting and end
AT A GLANCE Cockpit Displays 1 2 4 Tachometer 57 with indicator and warning lamps 13 > Position of automatic transmission 49 Display for > Computer 58 > Current vehicle speed 57 > Date of next scheduled service, and remaining distance to be driven 61 > Indicator and warning lamps 13 3 Display for > Odometer and trip odometer 57 Resetting the trip odometer 57 > Initializing the Flat Tire Monitor 72 > Resetting the Tire Pressure Monitor 75 > Settings and information 60 > Personal Profile settin
Cockpit AT A GLANCE Indicator and warning lamps The concept You can call up more information, e.g. on the cause of a malfunction and on how to respond, via Check Control, page 63. Indicator and warning lamps can light up in various combinations and colors in indicator area 1 or 2. Some lamps will be tested for proper functioning when the engine is started or the ignition is switched on and will therefore light up briefly.
AT A GLANCE Cockpit Around the center console 1 Hazard warning flashers 2 Speedometer with Control Display 12 3 Radio/CD Air conditioner or automatic climate control 85 Temperature Selecting waveband Changing the audio source Changing the radio station or track Ejecting CD 14 4 Recirculated-air mode Air distribution for air conditioner Air distribution to the windshield Air distribution to the upper body area Online Edition for Part no.
Cockpit Air distribution to the footwell Automatic air distribution and flow rate Maximum cooling AT A GLANCE 8 Changing to a different menu on the Control Display 9 MINI joystick 16 Move in four directions, turn or press 10 Accessing the main menu on the Control Display 17 Cooling function Around the headliner Defrosting windows Rear window defroster Windshield heating Air flow rate 5 Switches in the center console Seat heating 41 1 Microphone for voice activation system and for telephone in ha
AT A GLANCE Onboard computer Onboard computer Vehicle equipment Control Display In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Notes The concept Switching Control Display off/on The onboard computer integrates the functions of a large number of switches.
AT A GLANCE Onboard computer 2. Tilting in four directions. Opening the main menu Press the button. Buttons on MINI joystick Button Function Accessing the main menu Changing to another menu All functions of the onboard computer can be accessed via the main menu. Selecting a menu item Menu items displayed in white can be selected. 1. Turn the MINI joystick until the desired menu item is highlighted. Operating principle As of radio readiness, the following message appears on the Control Display: 2.
AT A GLANCE Onboard computer Changing between panels After selecting a menu item, e.g. "Radio", a new menu is displayed on a panel. The panels can overlap. > Move the MINI joystick to the left. Current panel is closed and the previous panel is displayed. > Move the MINI joystick to the right. The new panel is opened and placed on top. The following is displayed in the "Options" menu: > Screen settings. > Control options for the selected menu. Adjusting settings 1. Select a field. 2.
Onboard computer Example: setting the clock AT A GLANCE Status information 1. Press the button. The main menu is displayed. 2. Turn the MINI joystick until "Settings" is selected, and press the MINI joystick. 1 Time 2 Telephone status > Incoming, outgoing or missed call 3. Turn the MINI joystick until "Time/Date" is selected, and press the MINI joystick.
AT A GLANCE Letters and numbers Letters and numbers Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
AT A GLANCE Voice activation system Voice activation system Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Saying commands Activating voice activation system 1. Press the button on the steering wheel.
AT A GLANCE Voice activation system Possible commands Using alternative commands Most menu items on the Control Display can be spoken as commands. There are often a number of commands to run a function, e.g.: The commands that are possible depend upon which menu is currently shown on the Control Display. There are short commands for many functions. Some list items, for example telephone book listings, can also be selected using the voice activation system.
Voice activation system AT A GLANCE 3. "Speech mode:" 4. Select a setting: > "Default" > "Short" Notes For voice commands, bear in mind the following: > Do not use the voice activation system to initiate an emergency call. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a telephone connection. > Pronounce the commands and digits smoothly and at normal volume, avoiding excessive emphases and pauses.
Handle Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
CONTROLS Opening and closing Opening and closing Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Opening and closing CONTROLS Personal Profile settings Operating from outside For more information on specific settings, refer to the specified pages.
CONTROLS Opening and closing 1. "Settings" vehicle cannot be unlocked from inside without special knowledge.< Setting confirmation signals To have the vehicle confirm when it has been locked or unlocked. 1. "Settings" 2. "Door locks" 3. "Flash when lock/unlock" 2. "Door locks" 3. "Unlock button" 4. Press the MINI joystick. Switching on interior lamps 4. Select a menu item: > "All doors" Press the button once to unlock the entire vehicle.
Opening and closing Malfunctions The remote control may malfunction due to local radio waves. If this occurs, unlock and lock the car at the door lock with the integrated key. CONTROLS Depending upon the equipment, it is possible that only the driver's side door is unlocked or locked using the door lock. Do not lock the vehicle from the outside if there is any person inside, because the vehicle cannot be unlocked from inside without special knowledge.
CONTROLS Opening and closing Opening and closing: from inside Automatic locking You can also set the situations in which the car locks. The setting is stored for the remote control in use. 1. "Settings" 2. "Door locks" 3. Select a menu item: > "Lock if no door is opened" The central locking system automatically locks the vehicle after a short time if no door has been opened.
Opening and closing Opening CONTROLS MINI The Club Door can only be opened using the handle on the inside. The right-hand front door must be open when opening the Club Door. Press the button in the handle, arrow, or the button of the remote control, for an extended period. The tailgate is unlocked and can be opened. Closing First close the Club Door, followed by the righthand front door.
CONTROLS Opening and closing MINI The alarm system briefly indicates unauthorized entry or tampering by means of: > An acoustic alarm > Switching on the hazard warning flashers Arming and disarming General information Whenever the car is locked or unlocked, the alarm system is armed or disarmed. The handle recesses on the interior trim panel of the tailgate make it easier to pull it down.
Opening and closing Display on the revolution counter When the system is armed, all LEDs pulse. After approx. 16 minutes one LED flashes. CONTROLS This prevents false alarms, e.g. in the following situations: > In duplex garages > When being transported on car-carrying trains, ferries or trailers > If pets are to remain inside the car Switching off the tilt alarm sensor and interior movement detector Press the button on the remote control twice in succession.
CONTROLS Opening and closing > The engine can only be started if the remote control is in the vehicle. > The doors and tailgate/Split Rear Barn Doors must be closed to be able to operate the windows and glass roof. Comparison to standard remote controls The indicated function can be operated by pressing the buttons or via Comfort Access. Instructions on opening and closing are found starting on page 26.
Opening and closing Before driving a vehicle with automatic transmission into a car wash CONTROLS Replacing the battery 2. Depress the brake. The remote control for Comfort Access contains a battery that will need to be replaced from time to time. 3. Move the selector lever to position N. 1. Remove the cover. 1. Insert remote control into ignition lock. 4. Switch off the engine. The vehicle can roll. Malfunction Comfort Access may malfunction due to local radio waves, e.g.
CONTROLS Opening and closing Windows Tilting > Press the switch backward to the resistance point and hold it there. Both glass roofs are tilted. Releasing the switch stops the movement. > With the ignition switched on, press the switch backward beyond the resistance point. Both closed roofs are tilted fully. Pressing again stops the movement. Opening, closing With the ignition switched on and the glass roof tilted, press the switch backward and hold it there. The front glass roof opens.
Opening and closing Initializing electric power windows If the battery was disconnected, e.g. for changing batteries or vehicle storage, reinitialize the power windows; otherwise, the windows will not be lowered.< CONTROLS reopens slightly if the closing force exceeds a certain value. 2. Press the switch upward again within approx. 4 seconds and hold it there. The window closes without pinch protection. 1. Close the doors. 2. Open both windows. 3. Close both windows.
CONTROLS Adjustments Adjustments Vehicle equipment injuries can occur when the airbags are deployed.< In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Adjustments ing and regularly pull the belt in the upper-body area taut; otherwise, its restraining effect could be impaired.< Safety belts, refer to page 41. Seats CONTROLS Longitudinal adjustment Pull the lever, arrow 1, and slide the seat into the desired position, arrows 2. After releasing the lever, move the seat slightly forward or back so that it engages properly. Height Note before adjusting Never attempt to adjust your seat while the vehicle is moving.
CONTROLS Adjustments Before driving off, engage the front seats and seat backrests. Otherwise, there is a risk of accident due to unexpected movement.< Head restraints Correctly adjusted head restraint Turn the wheel to increase or decrease the curvature. Getting in back A correctly adjusted head restraint reduces the risk of neck injury in the event of an accident. Correctly adjust the head restraints of all occupied seats; otherwise, there is an increased risk of injury in an accident.
Adjustments CONTROLS Safety belts Front 1. Pull up as far as it will go. 2. Fold the backrest forward slightly. 3. Press button 1 and pull the head restraint out. 4. Fold back the backrest. Rear 1. Pull up as far as it will go. 2. Press button 1 and pull the head restraint out completely. Observe the instructions on page 39 to ensure the best possible personal protection.< Before every drive, make sure that all occupants wear their safety belts.
CONTROLS Adjustments belt has not been fastened, if objects are placed on the front passenger seat, or if driver or front passenger unfasten their safety belts. Damage to safety belts If the safety belts are damaged or stressed in an accident: have the safety belt system and its seat-belt tensioners replaced and the belt anchors checked.
Adjustments Interior and exterior mirrors, automatic dimming feature CONTROLS 3. Swing the lever back up. Do not use force to swing the lever back up; otherwise, the mechanism will be damaged.< It is controlled by two photosensors: > Inside the interior rearview mirror, arrow > On the back of the mirror.
CONTROLS Transporting children safely Transporting children safely Vehicle equipment Exception for front passenger seat In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Transporting children safely Child seat security CONTROLS the CRS to the vehicle seat up to a combined child and CRS weight of 65 lb/30 kg. Before installing the child seat, pull the belt out of the area for the child restraint fixing system. All rear safety belts and the safety belt for the front passenger can be prevented from being pulled out in order to secure child restraint systems. Locking the safety belt 1. Secure the child restraint system with the belt. 2. Pull the belt strap all the way out.
CONTROLS Transporting children safely Placement of the tether strap Make sure the upper tether strap does not run over sharp edges and is not twisted as it passes to the top anchor. Otherwise, the strap will not properly secure the child restraint system in the event of an accident.< 1 Direction of travel 2 Head restraint 3 Tether strap hook 4 Rear cargo well 5 Anchor 6 Seat backrest 7 Tether strap of the child restraint system Attaching upper tether strap to the attachment point 1.
Driving CONTROLS Driving Vehicle equipment Start/Stop button In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Ignition lock Inserting the key into the ignition lock Press the Start/Stop button to switch radio readiness or the ignition on and off.
CONTROLS Driving Radio readiness and ignition off All indicator and warning lamps in the displays go out. The ignition switches off automatically if the driver's door is opened. Pressing the Start/Stop button again switches the ignition back on.
Driving Automatic transmission 1. With the car at a stop, move the selector lever to position P. 2. Press the Start/Stop button. CONTROLS lever. Otherwise, excessive force could lead to overbraking and loss of traction, i.e. fishtailing, at the rear axle.< 3. Forcefully apply the parking brake. Before driving into a car wash Manual transmission By following these steps, the vehicle is able to roll: 1. Place the remote control, even with Comfort Access, in the ignition lock. 2. Depress the brake. 3.
CONTROLS Driving Selector lever positions Overriding the selector lever lock P R N D M/S + – Displays in the tachometer Press the button on the front of the selector lever, arrow. P R N D DS M1 to M6 P Park The selector lever position is displayed, or the current gear in the manual mode. Select this only when the vehicle is stationary. The front wheels are blocked.
Driving Sport program and manual mode M/S Move the selector lever from position D to the left into the M/S shifting slot: The Sport program is activated and DS is displayed. This position is recommended for a performance-oriented driving style. To deactivate the Sport program or manual mode M/S, move the selector lever to the right into position D. Shifting with the selector lever Push the selector lever forward or pull it back to activate manual operation. Steptronic shifts the gear.
CONTROLS Driving 5. Move the selector lever into the desired position by pressing the button on the front of the selector lever. Before manually unlocking the selector lever lock, firmly set the parking brake to prevent the vehicle from rolling away.< Turn signals/ headlamp flasher The setting is stored for the remote control currently in use. Wiper system Do not turn on the wipers when they are frozen; otherwise, the wiper blades and the windshield wiper motor may be damaged.
Driving Normal wiper speed Press once. The system switches to intermittent operation when the vehicle is stationary. Fast wiper speed CONTROLS Adjusting the sensitivity of the rain sensor 1. Switch on the ignition, refer to page 47. 2. Press the button in the turn signal indicator as often as necessary until "SET/INFO" is displayed. Press twice or press beyond the resistance point. The system switches to normal speed when the vehicle is stationary.
CONTROLS Driving 7. Wait, or press and hold the button until the display changes. The settings are stored. Rear window wiper Deactivating intermittent wipe or rain sensor Press the button again, arrow 3. Brief wipe Press the lever downward once, arrow 2. Cleaning windshield and headlamps 0 Rear wipers parked 1 To switch on intermittent wipe : Turn the cap to level 1. Operation is continuous in reverse gear. Pull the lever, arrow 4.
Driving Washer fluid reservoir CONTROLS Activating Only refill washer fluid that contains antifreeze when the engine is cool, to avoid contact with hot engine parts. Otherwise, fluid spills constitute a fire hazard and a risk to personal safety.
CONTROLS Driving Increasing speed For better control Press button 1 repeatedly until the desired speed is reached. Every time you press the button, the speed increases by approx. 1 mph or 1 km/h. Indicator lamp in the speedometer lights up. The cruise control system is ready and can be activated. Malfunction Accelerating using the button Press and hold button 1. The vehicle accelerates without pressure on the accelerator pedal. After the button is released, the driving speed is maintained and stored.
Controls overview CONTROLS Controls overview Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. If the range displayed is less than 30 miles/50 km, be sure to refuel; otherwise, engine functions are not guaranteed and damage may occur.
CONTROLS Controls overview The following information is displayed sequentially: Computer > Trip odometer Displays in tachometer > Time > External temperature Trip odometer To display trip recorder: Briefly press button 3. Resetting the trip odometer: While the trip recorder is displayed and the ignition is switched on, press button 3. Press the button in the turn signal lever repeatedly to call up various items of information. Time To set time, see page 62.
Controls overview To reset average fuel consumption: press the button in the turn signal lever for approx. 2 seconds. Current fuel consumption CONTROLS > Probable arrival time when a destination has been input into the navigation system, page 112. Displays in the "Trip computer": Displays the current fuel consumption to allow you to see whether your current driving style is conducive to fuel economy with minimum exhaust emissions.
CONTROLS Controls overview Settings and information Exiting displays Operating principle Certain settings and information are only available when the ignition is switched on, the vehicle is at a standstill and the doors are closed. 1. Press the button in the turn signal lever repeatedly until "HOME" is displayed. 2. Press the button for a longer period. Current vehicle speed is once again displayed. 1 Displays are also exited if no entries are made for approx. 8 seconds.
Controls overview CONTROLS 1. "Settings" 1. "Vehicle Info" 2. "Language/Units" 2. "Vehicle status" 3. Select the desired menu item. 3. "Service required" 4. Select the desired unit. Required maintenance procedures and legally mandated inspections are displayed. Service requirements You can request more detailed information on every entry: Select an entry and press the MINI joystick. To exit from the menu: Move the MINI joystick to the left.
CONTROLS Controls overview Clock 3. "Service required" Setting the time 1. "Settings" 4. "§ Vehicle inspection" 2. "Time/Date" 5. Open the deadline entry menu. 6. "Date:" 7. Create the settings. 8. Press the MINI joystick to apply the setting. The year is highlighted. 3. "Time:" 9. Turn the MINI joystick to make the adjustment. 10. Press the MINI joystick to apply the setting. The date entry is stored. To exit from the menu: Move the MINI joystick to the left. 4.
Controls overview Setting the time format CONTROLS 3. "Format:" The settings are stored for the remote control currently in use, refer also to Personal Profile on page 26. 1. "Settings" 2. "Time/Date" 3. "Format:" 4. Select the desired format and press the MINI joystick. The time format is stored. Setting time zone 1. "Settings" 2. "Time/Date" 3. "Time zone:" 4. Turn MINI joystick until the desired time zone is set and press the MINI joystick. The time zone is stored. 4. Select the desired format.
CONTROLS Controls overview Text messages Text messages at the upper edge of the Control Display explain the meaning of the displayed indicator and warning lamps. > Other Check Control messages are automatically hidden after approx. 20 seconds, but remain stored. >They are marked with the symbol shown here. Supplemental text messages For most Check Control messages, you can view more information later, e.g. regarding the cause of a malfunction and how to respond, refer to page 65.
Controls overview 3. Press the button repeatedly until the corresponding symbol and "CHECK INFO" appear in the display. CONTROLS Speed limit Enter a speed, and a Check Control message will indicate when you reach this speed. This enables you, for example, to receive warnings if you exceed a speed limit in an urban area. You are only warned of reaching this speed a second time if your vehicle speed falls below it again by at least 3 mph or 5 km/h. Displaying, setting or changing the limit 1.
CONTROLS Controls overview Activating/deactivating the limit 4. Select the desired language. 1. "Settings" The setting is stored for the remote control currently in use. 2. "Speed" 3. "Warning" Setting the voice dialog Switch between a standard dialog and a short dialog. 1. "Settings" 2. "Language/Units" 3. "Speech mode:" 4. Select the desired dialog. 4. Press the MINI joystick. Altering settings Language on the Control Display You can set the language on the Control Display. 1.
Controls overview CONTROLS 4. Turn the MINI joystick until the desired setting is reached. 5. Press the MINI joystick. The setting is stored for the remote control currently in use. In bright conditions, for example, the brightness control may not be clearly visible. Online Edition for Part no.
CONTROLS Technology for driving comfort and safety Technology for driving comfort and safety Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Park Distance Control PDC The concept PDC assists you with parking in reverse.
Technology for driving comfort and safety enter the sensors' blind spots before or after a continuous audible signal is given. Higher, protruding objects, such as wall ledges, may not be detectable. Therefore, always drive cautiously; otherwise, there is a risk of personal injury or property damage. Loud sound sources outside or inside the car can drown out the PDC signal.
CONTROLS Technology for driving comfort and safety Activating DSC Activating DTC Press the button again: the DSC indicator lamps in the display elements go out. For better control The indicator lamp on the tachometer is flashing: DSC controls the driving and braking forces. The indicator lamp DSC OFF on the speedometer is on and DSC OFF is displayed on the tachometer: DSC is deactivated.
Technology for driving comfort and safety Deactivating both DTC and DSC CONTROLS Sport button Pressing the button causes your MINI to respond even more sportily. > Engine responds more spontaneously to movements of the accelerator. > Steering response is more direct. > Cooper S, John Cooper Works: the engine sounds more sporty in coasting mode. Press the button for at least 3 seconds; the indicator lamp DSC OFF on the speedometer comes on and DSC OFF is displayed on the tachometer.
CONTROLS Technology for driving comfort and safety sponding wheel change. This is detected and reported as a flat tire. 3. "Flat Tire Monitor" Functional requirement The system must have been initialized while the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after every correction of the tire inflation pressure and after every tire or wheel change. The status is displayed.
Technology for driving comfort and safety CONTROLS Indication of a flat tire Continued driving with a flat tire The warning lamps come on in yellow and red. A message appears on the Control Display. An acoustic signal also sounds. There is a flat tire or a major loss in tire inflation pressure. When driving with a damaged tire: 1. Reduce speed and stop the vehicle with caution. Avoid sudden braking and steering maneuvers. 2.
CONTROLS Technology for driving comfort and safety Tire Pressure Monitor TPM 3. "Tire Pressure Monitor - TPM" The concept Measuring the inflation pressure in the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires. Functional requirement The system must have been reset while the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured.
Technology for driving comfort and safety > Interference from systems or devices with the same transmission frequency. > Malfunction. Resetting the system Reset the system again after each correction of the tire inflation pressure and after every tire or wheel change. 1. "Vehicle Info" 2. "Vehicle status" CONTROLS Message for low tire inflation pressure The warning lamps come on in yellow and red. A message appears on the onboard computer. An acoustic signal also sounds.
CONTROLS Technology for driving comfort and safety replaced if necessary at your earliest opportunity. Run-flat tires You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h. If the vehicle is not equipped with run-flat tires, do not continue driving; continuing to drive can result in serious accidents.< Continued driving with a flat tire When driving with a damaged tire: 1. Avoid sudden braking and steering maneuvers. 2. Do not exceed a speed of 50 mph/80 km/h. 3.
Technology for driving comfort and safety Message for unsuccessful system reset Yellow warning lamp comes on. A message appears on the onboard computer. The system has detected a wheel change, but has not yet been reset. It is not possible to provide a reliable warning about the current inflation pressure. Check the tire inflation pressure and reset the system, page 75. Declaration according to NHTSA/ FMVSS 138 Tire Pressure Monitoring Systems CONTROLS continuously lit.
CONTROLS Technology for driving comfort and safety Airbags The following airbags are located under the marked covers: 1 Front airbags 2 Side airbags in backrests 3 Head airbags at the front and rear Protective action Observe the instructions on page 38 to ensure the best possible personal protection.< The front airbags help protect the driver and front passenger by responding to frontal impacts in which safety belts alone cannot provide adequate restraint.
Technology for driving comfort and safety CONTROLS bags for the front passenger are activated or deactivated by the system accordingly. the front passenger airbags are activated or deactivated. The indicator lamp above the interior rearview mirror shows the current status of the front passenger airbags, deactivated or activated, refer to Status of front passenger airbags below.
CONTROLS Technology for driving comfort and safety Airbag system malfunction > The warning lamp does not come on when radio readiness is switched on. > The warning lamp stays lit continuously. In the event of a fault in the airbag system, have it checked without delay; otherwise, there is the risk that the system will not function as intended even if a severe accident occurs.< 80 Online Edition for Part no.
Lamps CONTROLS Lamps Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Parking lamps/low beams The parking lamps will discharge the battery.
CONTROLS Lamps Welcome lamps If you leave the light switch in the low beam or automatic headlamp control position when you switch off the ignition, the parking lamps and interior lamps come on for a certain time as soon as the vehicle is unlocked. Switch on the parking lamps separately if needed. Depending on the national-market version, it may not be possible to deactivate the daytime running lights.
Lamps In reverse, the Adaptive Light Control is not activated. CONTROLS Front fog lamps Malfunction A message is displayed. The Adaptive Light Control is malfunctioning or failed. Have the system checked as soon as possible. High beams/roadside parking lamps 1 Front fog lamps 2 Rear fog lamp Press the respective switch to turn the lamps on/ off. Front fog lamps The parking lamps or low beams must be switched on for the fog lamps to operate.
CONTROLS Lamps Reading lamps Adjusting brightness > Briefly press button: brightness changes in stages. > Press and hold the button. Brightness changes in a continuous manner. To switch the reading lamps on and off In the front: press the switch. In the rear: press the button. Ambient lighting Interior lamps The interior lighting, the footwell lamps and the luggage compartment lighting are automatically controlled.
Climate CONTROLS Climate Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available, for example due to the selected options or national-market version. This also applies to safety related functions and systems. Equipment versions 1 Air conditioner Depending on your vehicle's equipment, your MINI contains an air conditioner or an automatic climate control.
CONTROLS Climate Air vents 3 Airflow directed toward the windshield and side windows 4 Air to the upper body area, draft-free ventilation 5 Air to the footwell Air conditioner 1 Air flow rate 5 Rear window defroster 2 Cooling function 6 Air distribution 3 Recirculated-air mode 7 Windshield heating 4 Temperature Air flow rate Adjust the air flow rate. The higher the rate, the more effective the heating or cooling will be.
CONTROLS Climate otherwise, the air quality in the passenger compartment will deteriorate continuously.< Temperature Turn upward, red, to increase the temperature. Turn downward, blue, to decrease the temperature. Rear window defroster The defroster is switched off automatically after a certain time. The rear window heating is lowered or switched off entirely to reduce the drain on the battery. Windshield heating The windshield heating is switched off automatically after a short time.
CONTROLS Climate Comfortable interior climate Recirculated-air mode AUTO program 2 offers the ideal air distribution and air flow rate for almost all conditions, refer to AUTO program below. All you need to do is select an interior temperature which is comfortable for you. If there are odors or pollutants in the outside air, the supply of outside air can be shut off. The system then recirculates the air currently within the vehicle.
Climate Temperature Set the desired temperature individually. The automatic climate control achieves this temperature as quickly as possible regardless of the season, using maximum cooling or heating power if necessary, and then maintains it. If you switch between different temperature settings in quick succession, the automatic climate control does not have enough time to achieve the set temperature.< Rear window defroster The defroster is switched off automatically after a certain time.
CONTROLS Practical interior accessories Practical interior accessories Vehicle equipment A list of compatible remote controls is available on the Internet at www.homelink.com. In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Practical interior accessories 5. As soon as the LED flashes rapidly, release both buttons. The quick flashing indicates that the button on the rearview mirror has been programmed. If the LED does not flash rapidly after approx. 60 seconds, alter the distance between the rearview mirror and hand-held transmitter and repeat this step. Several attempts at different distances may be necessary. Wait at least 15 seconds before each attempt.
CONTROLS Practical interior accessories press the button on the hand-held transmitter for 2 seconds and release several times. Digital compass Operation Before using the integrated universal remote control, always inspect the immediate area to make certain that no people, animals or objects are within the travel range of the device. Comply also with the safety instructions supplied with the original hand-held transmitter.
Practical interior accessories To set the compass zones, press the setting button for approx. 3-4 seconds. The number of the compass zones that have been set are shown on the display. CONTROLS vehicle, and that you have enough space to drive in circles. 2. Set the compass zone that currently applies. To change the zone setting, quickly press the setting button as often as necessary until the number of the compass zone for your location is displayed. 3. Press the setting button approx.
CONTROLS Practical interior accessories Glove compartment Opening Depending on the temperature setting of the air conditioner or the automatic climate control, high temperatures may result in the glove compartment. USB interface for data transfer For the updating of navigation data, refer to page 110 on USB media via the USB interface in the glove box. Observe the following when connecting: > Do not forcibly connect the plug to the USB interface. Press the button to open the cover.
Practical interior accessories Center armrest CONTROLS Storage compartment on the front passenger side The center armrest between the front seats contains either a compartment or the cover for the snap-in adapter, see page 166. Opening Briefly press the bottom edge of the cover. Opening Closing The cover slides along guide rails and can be opened fully by pushing it back and lifting it. Push the cover back into its original position. Closing Push the cover forward.
CONTROLS Practical interior accessories > Storage compartment in the Split Rear Barn Doors > Net on the rear cargo well for smaller objects; for attaching to the lashing eyes Cupholders and ashtray Ashtray The ashtray is located in one of the cupholders in the center console. Emptying Remove the entire ashtray. Lighter Cupholders Two cupholders are located in the front of the center console; another is in the rear at the back of the center console.
Practical interior accessories CONTROLS Connecting electrical appliances In your MINI, when the engine is running or if the ignition is switched on, you can use electrical devices such as flashlights, car vacuum cleaners, etc., up to approx. 140 watts at 12 volts, as long as one of the following sockets is available. Avoid damaging the sockets by attempting to insert plugs of unsuitable shape or size.
Drive Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
DRIVING TIPS Things to remember when driving Things to remember when driving Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Break-in period Moving parts need breaking-in time to adjust to each other.
Things to remember when driving If special circumstances make it absolutely necessary to drive with the tailgate/Split Rear Barn Doors open: 1. Close all windows and the glass sunroof. 2. Switch off the recirculated-air mode and switch the airflow control of the heating, air conditioner, or automatic climate control to high, refer to page 86 or 88. Hot exhaust system As in all vehicles, extremely high temperatures are generated on the exhaust system.
DRIVING TIPS Things to remember when driving Hills To prevent overheating and the resulting reduced efficiency of the brake system, drive long or steep downhill gradients in the gear in which the least braking is required. Even light but consistent brake pressure can lead to high temperatures, brake wear and possibly even brake failure.< You can increase the engine's braking effect by shifting down, all the way to first gear if necessary.
Things to remember when driving DRIVING TIPS Do not allow the luggage compartment roll-up cover to snap back, otherwise it can be damaged.< The roll-up cover can be locked in place at the intermediate positions 1 to 3. By way of example, the illustration shows the cargo area in the MINI. 1. Pull the lever. 2. Fold rear seat backrests forward. The roll-up cover can be removed to load bulky luggage. Removing When folding the backrest back up, make sure that the seat's locking mechanisms engage properly.
DRIVING TIPS Things to remember when driving MINI Clubman: cargo net Ensure that the cargo net is firmly attached; otherwise, injuries may occur.< The cargo net can be mounted in the cargo area or behind the front seats. MINI Clubman: flat load floor The maxim load for the flat load floor is 165 lbs/75 kg. Do not exceed a maximum permissible load of 55 lbs/25 kg for the storage compartment beneath the flat load floor; otherwise, damage can occur.< In the cargo area 1.
Things to remember when driving DRIVING TIPS 3. Subtract the combined weight of the driver and passengers from XXX pounds or YYY kilograms. > For very heavy cargo when the rear seat is not occupied, secure each safety belt in the respective opposite buckle. 4. The resulting figure equals the available amount of cargo and luggage load capacity.
DRIVING TIPS Things to remember when driving > Heavy-duty cargo straps for securing larger and heavier objects are available at your MINI dealer. Four lashing eyes are provided for attaching the cargo straps. Two of them are located on the forward wall of the cargo area. Comply with the information enclosed with the load-securing devices. Always position and secure the cargo as described above, so that it cannot endanger the car's occupants, for example if sudden braking or swerves are necessary.
Things to remember when driving Fuel consumption depends on a number of different factors. Fuel consumption and environmental pollution are affected by various actions, the manner of driving and regular maintenance. Remove unnecessary cargo DRIVING TIPS engine and road speed. In doing so, avoid high engine speeds and shift up early. When you reach your desired traveling speed, shift to the highest suitable gear and drive at constant speed. Additional weight increases fuel consumption.
Follow Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
NAVIGATION Navigation system Navigation system Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Navigation data Information on navigation data 1. "Navigation" 2. Open "Options". 3.
Navigation system NAVIGATION 3. Enter the activation code of the USB storage device. 4. Begin driving. The update begins after the activation code is entered. When the update is completed, the system restarts. Online Edition for Part no.
NAVIGATION Destination entry Destination entry General information The system also supports you with the following features: In entering your destination you can select from among the following options: > If you do not enter a street, the system will guide you to the downtown area of a town or city.
Destination entry To enter spaces, if necessary: Select the symbol. 4. If necessary, move the MINI joystick to the right and change to the list of towns and cities and select a name. NAVIGATION 4. Select the digits. 5. Change to the list of house numbers. 6. Select a house number or range of house numbers. Entering a street without a destination town/city It is also possible to enter a street without entering a destination town/city.
NAVIGATION Destination entry > Setting "Route preference", refer to page 121. Storing a destination in the address book > Search for "Points of Interest at loc.", refer to page 116. Store the destination in the address book after entering the destination. 1. "Navigation" 2. "Map" 3. "Guidance" 4. Open "Options". 5. "Store as new contact" or "Add to existing contact". Address book To create contacts, refer to page 163 or page 180. Selecting a destination from the address book 1. "Navigation" 2.
Destination entry 3. "Store position as contact" or "Add position to contact". NAVIGATION 3. "Home" 4. "Start guidance" 4. Depending on the selection, select an existing contact from the list or the type of address and enter the last and first name. 5. "Store in vehicle" Editing or deleting an address 1. "Navigation" Last destinations The last destinations are stored automatically. These destinations can be called up and used as a destination for route guidance. 2.
NAVIGATION Destination entry Deleting the last destinations 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. If several details are stored, then you can scroll through the pages. If a phone number is available, a connection can be established, if desired. 4. Open "Options". Category search 5. "Delete entry" or "Delete all last destinations". 1. "Category search" 2. "Search destination" 3. Select or enter town/city. Special destinations You can search for a special destination, e.
Destination entry > With active route guidance: "Along route" NAVIGATION 3. Open "Options". 4. "Display Points of Interest" Starting the search for special destinations 5. Select the settings. 1. "Start search" 2. A list of the special destinations is displayed. > "At current location" The special destinations are displayed in order of their distance and are displayed with a direction arrow pointing toward the destination.
NAVIGATION Destination entry 4. Select the destination with the cross-hairs. > Changing scale: turn the MINI joystick. > Moving map: move the MINI joystick in the corresponding direction. > Shifting map diagonally: move the MINI joystick in the corresponding direction and turn the MINI joystick. 5. Press the MINI joystick to display additional menu items. > Select the symbol: "Start guidance" or "Add as another destination". > "Find points of interest": the search for special destinations is started.
Destination entry 3. Say the name of the town/city or if necessary, spell at least the first three letters. 4. Select city/town: > To select a recommended town/city: {Yes} > Select other city/town: {New entry} > To select an entry, e.g. {Entry …} > Spell the entry: {Spell city} NAVIGATION Starting route guidance {Start guidance} Route guidance starts immediately. Adding further intermediate destinations {Add as another destination} Further intermediate destinations can be added.
NAVIGATION Destination entry 3. "Add as another destination" 4. Select the location where the intermediate destination is to be inserted. Starting the trip After entering all intermediate destinations: "Start guidance" Word-matching principle The system's word-matching principle makes it easier to enter the names of towns or streets. The system runs ongoing checks, comparing your destination entries with the data stored in the vehicle as the basis for instant response.
NAVIGATION Route guidance Route guidance Starting route guidance 1. "Navigation" 2. "Enter address" 3. Select the destination. 4. "Accept destination" 5. "Start guidance" > The route is displayed on the onboard computer. > The distance to the destination/intermediate destination and the estimated time of arrival are displayed in the map view. > The arrow display is displayed on the onboard computer, if so desired.
NAVIGATION Route guidance > "Alternative routes": suggestions of additional alternate routes during route guidance. > Small arrow: indicates the next change of direction. > Intersection view. > Lane information. > Traffic information. > Distance to the next change of direction. > Street name of the next change of direction. Lane information 5. Select additional route criteria, if desired. Where possible, the selected criteria will be avoided on the route.
Route guidance NAVIGATION Map display 1. "Navigation" 2. "Route information" 3. "New route for:" Displaying map view 1. "Navigation" 2. "Map" Overview 4. Turn the MINI joystick: enter the desired mileage. 5. Press the MINI joystick. Resuming the original route 1 Toolbar If the route section should no longer be bypassed: 2 Route segment with traffic obstruction 3 Road sign for traffic obstruction 1. "Navigation" 4 Planned route 2. "Route information" 5 Current location 3.
NAVIGATION Route guidance Traffic information, refer to page 125. "Interactive map" Planned route After route guidance is started, the planned route is displayed on the map. Status boxes Show/hide: press the MINI joystick. > Upper status box: time, phone details, and entertainment details. > Lower status box: symbol for active route guidance, traffic information status, arrival time, and distance from destination. > Moving map: move the MINI joystick in the corresponding direction.
Route guidance NAVIGATION 3. "Arrow display on map" This volume is independent of the volume of the audio sources. Destination guidance via voice instructions The setting is stored for the remote control currently in use. Switching voice instructions on/off Traffic information The voice instructions can be switched on and off during route guidance. Overview 1. "Navigation" 2. "Map" 3. Select the Symbol symbol.
NAVIGATION Route guidance in material breach of the terms and conditions contained herein. A. Total Traffic Network, a division of Clear Channel Broadcasting, Inc. ("Total Traffic Network") holds the rights to the traffic incident data and RDS-TMC network through which it is delivered. You may not modify, copy, scan or use any other method to reproduce, duplicate, republish, transmit or distribute in any way any portion of traffic incident data.
Route guidance 1. "Navigation" NAVIGATION 5. Select the desired categories. 2. "Map" 3. Open "Options". 4. "Settings" 5. "Traffic conditions/gray map" Symbols in map view The symbols of traffic obstructions are displayed differently, depending on the scale of the map and location of the traffic obstruction in relation to the route. Traffic bulletins of the selected categories are displayed.
NAVIGATION Route guidance It is also possible to take alternate routes can also be taken if the traffic reports are accessed via the list: 1. "Navigation" 2. "Map" 3. "Traffic Info" 4. "Detour information" 5. "Detour" Dynamic route guidance The route is automatically changed in the event of traffic obstructions. > The system will not point out traffic obstructions on the original route. > Traffic information will continue to be displayed on the map.
What to do if… NAVIGATION What to do if… What to do if… > The current position cannot be displayed? The position is in an unrecognized region, in a poor reception area, or the system is in the process of determining the position. Reception is best when you have an unobstructed view to the sky. > The route guidance does not accept an address without the street name? A downtown area cannot be determined for the town or city that has been entered.
Rock Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
ENTERTAINMENT On/off and tone On/off and tone Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. 4 Sound output for entertainment on/off, volume > Press: switch on/off. When you switch on the unit, the radio station or track set most recently is played.
On/off and tone Adjusting volume ENTERTAINMENT Adjustments 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" Turn the knob to the desired volume. The volume can also be adjusted on the steering wheel, refer to page 10. 3. Select the desired tone setting. The setting is stored for the remote control currently in use; refer to Personal Profile, page 26. Setting tone controls Various tone settings can be changed, e.g. treble and bass or the speed-dependent volume control.
ENTERTAINMENT On/off and tone Adjustments 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Volume settings" 4. Select the desired volume setting. 5. To adjust: turn the MINI joystick. 6. To store: press the MINI joystick. Resetting tone settings All tone settings can be reset to the default value. 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Reset" 134 Online Edition for Part no.
ENTERTAINMENT Radio Radio Vehicle equipment 1. "Radio" In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. General information Your radio is designed for reception of the following stations: 2. "FM" or "AM" 3. Select the desired station.
ENTERTAINMENT Radio 4. Select the frequency: turn the MINI joystick. Switching the RDS on/off 1. "Radio" 2. "FM" 3. Open "Options". 4. "RDS" To store the station: press the MINI joystick. Storing stations 1. "Radio" 2. "FM" or "AM" 3. Select the desired station. The setting is stored for the remote control currently in use. HD Radio™ reception Many radio stations transmit analog and digital signals.
ENTERTAINMENT Radio When setting a station with a digital signal, it may be a few seconds until the station is reproduced in digital quality. 3. "Store station" In areas in which the station is not continuously received in digital mode, playback switches between analog and digital reception. In this case, switch off digital radio reception. Displaying additional information Some stations broadcast additional information on the current track, such as the name of the artist. 1.
ENTERTAINMENT Symbol Radio 6. Dial the telephone number to have the channels activated. Function Accessing favorites, selecting the My Favorites category Managing favorites Traffic Jump Managing subscription Clear reception is required for activating and deactivating channels. Reception is best when you have an unobstructed view to the sky. The channel name is displayed in the status line. This telephone number can also be used to deactivate the channels.
ENTERTAINMENT Radio 4. Select desired channel. The channels are stored for the remote control currently in use. Changing list view The list view changes each time the first symbol on the navigation bar is pressed. Information about the channel is displayed. Symbol Function Channel name Using the buttons near the CD player Artist Press the button for the corresponding direction. The next channel is selected. Track Using direct channel entry Selecting category 1. "Radio" 1. "Radio" 2.
ENTERTAINMENT 3. Radio "Replay - Time shift" Activating 1. "Radio" 2. "Satellite radio" 3. "Replay - Time shift" 4. "Automatic time shift" Deactivating "Automatic time shift" > The red arrow indicates the current playback position. > The time difference from the live broadcast is displayed next to the cache memory bar. Storing favorites Up to 30 favorites can be stored in the favorites list. Possible favorites include artist, track, game, league, and team. > For live transmissions: "live".
ENTERTAINMENT Radio 5. Select the desired league. Traffic Jump 6. Select "Add all teams" or a desired team. Traffic and weather information for a selected region are broadcast at intervals of a few minutes. Accessing favorites If an activated favorite is being played, the message "Favorite alert!" appears for approx. 20 seconds. Select "Favorites" while the alert message is being displayed. Selecting region 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4. "Set jump" 5. Select the desired region.
ENTERTAINMENT Radio Notes > Under some circumstances, reception may not be possible, e.g. under certain environmental or topographical conditions. The satellite radio has no influence on this. > The signal may not be available in tunnels or underground garages or near trees, mountains, or other powerful sources of radio interference. 142 Online Edition for Part no.
CD player ENTERTAINMENT CD player Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Selecting the track using the onboard computer Audio CDs 1. "CD/Multimedia" 2. "CD" 3. Select the desired track. Press the MINI joystick to start playback.
ENTERTAINMENT CD player 4. Select a track and press the MINI joystick. 5. "Random" Displaying information about the track Switch off random play sequence: press the MINI joystick. If information about a track has been stored, it is displayed automatically: Fast forward/reverse Press and hold the sponding direction. button for the corre- Automatic replay Selected tracks, folders, or CDs are automatically repeated.
External devices ENTERTAINMENT External devices Vehicle equipment Connecting In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Overview Different external devices can be connected to the vehicle. Sound is output over the vehicle speakers.
ENTERTAINMENT External devices Volume The volume of the sound output depends on the audio device. If this volume greatly deviates from the other audio sources, then the volume should be equalized. Adjusting volume File systems 1. "CD/Multimedia" 2. "External devices" if applicable 3. Because of the large number of audio devices available on the market, an operation via the vehicle cannot be guaranteed for every audio device/mobile phone. Ask your MINI dealer for suitable audio devices/ mobile phones.
ENTERTAINMENT External devices Connecting via the USB audio interface Number of tracks The data from up to four USB devices or for approx. 26,000 tracks can be stored in the vehicle. If a fifth device is connected or if more than 26,000 tracks are stored, then the data of existing tracks may be deleted. Copy protection Music tracks with integrated Digital Rights Management (DRM) cannot be played. 1 USB interface 2 AV-In connection for audio/video playback: TRS connector 1/8''/3.
ENTERTAINMENT 3. Select the or External devices symbol. 1. "CD/Multimedia" 2. "External devices" 3. Select the or symbol. 4. "Playlists" Current playback List of tracks currently being played. 1. "CD/Multimedia" 2. "External devices" 4. Select desired category, e.g. "Genre", "Artist". All entries are displayed in a list. > Open "A-Z search" and enter the desired input. When a letter is entered, the results are filtered using this letter as the first letter.
External devices 3. Select the or MINI joystick. symbol and press the ENTERTAINMENT Information on connection > The connected audio device is supplied with a max. power of 500 mA if supported by the device. Therefore, do not connect the device to the power socket in the vehicle. 4. "Video" > Do not use force when plugging the connector into the USB interface. > Do not connect any devices, e.g. fans or lamps, to the USB audio interface. > Do not connect USB hard drives.
ENTERTAINMENT External devices tooth passkey. Only required once for pairing. "OK". Pairing and connecting Only pair the device when the vehicle is stopped; otherwise, inattention may lead to endangerment of passengers or other road users.< 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. "Bluetooth® audio" if applicable 4. "Add new phone" The Bluetooth name of the vehicle is displayed. 8. Select desired functions with which the device is to be connected, e.g. "Audio". 9.
ENTERTAINMENT External devices Connecting a device 4. Select the symbol. 1. "CD/Multimedia" 2. "Bluetooth® (audio)" 3. "Bluetooth® audio" if applicable 4. Select the desired device from the list of paired devices. 5. Select the desired track from the list. Playback menu Depending on the device, all functions may not be available. symbol displayed in white: device is active as an audio source.
ENTERTAINMENT External devices 4. Open "Options". Device could not be paired or connected. 5. "Select player" Disconnecting an audio connection > Do the Bluetooth passkeys on the device and vehicle match? Enter the same passkey on the device and via the onboard computer. 1. "CD/Multimedia" > A multi-digit passkey may be required. 2. "Bluetooth® (audio)" > Is the passkey input taking longer than 30 seconds? Repeat the pairing procedure. 6. Select the desired program. 3.
External devices > Activate and deactivate the radio mute on the radio control panel. ENTERTAINMENT 5. "Update software" Playback is not possible when the mobile phone is connected via Bluetooth audio and at the same time via the music interface for smartphones at the snap-in adapter. > Disconnect one of the two connections, e.g. the audio connection, refer to page 152, and start playback again.
Connect Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
COMMUNICATIONS Hands-free device Bluetooth Hands-free device Bluetooth Vehicle equipment With other mobile phones or software versions, malfunctions may occur. In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Hands-free device Bluetooth COMMUNICATIONS > A number with at least 4 and at most 16 digits has been established as the Bluetooth passkey. Only required once for pairing. > Compare the control number on the Control Display with the control number on the mobile phone display. Confirm the control number in the mobile phone and in the vehicle. > Radio readiness switched on. Activating/deactivating Bluetooth link Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1.
COMMUNICATIONS Hands-free device Bluetooth If pairing was successful, the mobile phone appears at the top of the list of mobile phones. 5. "Remove phone from list" If the pairing was not successful: What to do if…, refer to page 158. Following the initial pairing > The mobile phone is detected/connected in the vehicle within a short period of time when the engine is running or radio readiness is switched on.
COMMUNICATIONS Hands-free device Bluetooth Is the mobile phone no longer responding? Operation > Switch the mobile phone off and back on again. Repeat the pairing procedure. Adjusting volume > Is the ambient temperature too high or too low? Do not subject your mobile phone to extreme ambient temperatures. Phone book entries are not displayed, not all of them are displayed, or they are displayed incompletely. > The transfer of phone book entries has not yet completed.
COMMUNICATIONS Hands-free device Bluetooth Rejecting a call Calls with multiple parties "Reject" The caller is redirected to the mailbox if it has been activated. General information Ending a call Press the button on the steering wheel or Accepting a call while speaking to another party 1. "Telephone" 2. It is possible to switch between two calls and to connect two calls to form a conference call. These functions must be supported by the mobile phone and by the service provider.
Hands-free device Bluetooth Switching between two calls, toggling 3. COMMUNICATIONS "Keypad dialing" Active call: highlighted. The call on hold is identified with: "on hold...". Select the hold. symbol to switch to the call on Establishing a conference call Two calls can be connected to a single telephone conference call. 1. Establish two calls. 2. "Conference call" 4. Enter the DTMF code via the onboard computer. For a conference call in progress, DTMF dialing is not possible.
COMMUNICATIONS Hands-free device Bluetooth 2. Select the symbol. Contact with more than one phone number. Select phone number, the connection is established. Deleting a single entry or all entries Call not possible, the mobile phone has no reception or network. 1. Highlight the entry. Editing a contact 3. "Delete entry" or "Delete list". Changing entries in the "Contacts" menu. If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle. 1.
Hands-free device Bluetooth Deleting a single entry or all entries Deleting entries depends upon the mobile phone. COMMUNICATIONS At this point, follow the instructions that appear on the display of the mobile phone, also refer to the Owner's Manual for the mobile phone. 1. Highlight the entry. 2. Open "Options". Contacts 3. "Delete entry" or "Delete list". Saving an entry in the contacts General information 2. Open "Options". Contacts can be created and edited.
COMMUNICATIONS Hands-free device Bluetooth that route guidance is possible for all addresses. A symbol indicates the storage location of the contacts: 6. "Store" if necessary 7. "Store contact in vehicle" Defining a home address Symbol Storage location No symbol In the vehicle; the address has not been checked as a destination. It is possible to store a home address. It is listed at the beginning of the contacts. In the vehicle; the address has been checked as a destination. 1. "Home" 2.
Hands-free device Bluetooth COMMUNICATIONS Checking the address as a destination An address that is to be used in route guidance must correspond to the navigation data stored in the vehicle. The address can be checked to ensure this. 1. Select the desired contact and highlight the address. 2. Open "Options". 3. "Check as destination" 4. Correct and store the address, if necessary. Selecting name sorting Names can be displayed in different orders. 1. "My contacts" 2. Open "Options". 3.
COMMUNICATIONS Mobile phone preparation Bluetooth Mobile phone preparation Bluetooth Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Snap-in adapter The snap-in adapter, refer to page 177, makes it possible to: > Accommodate the mobile phone.
Mobile phone preparation Bluetooth Notes Do not expose your mobile phone to extreme ambient conditions, for example, very high temperatures; otherwise, functions on your mobile phone may not work. Follow the operating instructions for your mobile phone. Pairing/unpairing mobile phone Overview > Using a mobile phone as a telephone. > Using the mobile phone as an auxiliary phone. > Using a mobile phone as an audio source. > Using an audio device as an audio source, refer to page 149.
COMMUNICATIONS Mobile phone preparation Bluetooth 5. Select desired additional function. The Bluetooth name of the vehicle is displayed. Bluetooth audio Use a mobile phone as a telephone and as an audio device in the vehicle. "Bluetooth® audio" To use a mobile phone exclusively as a telephone in the vehicle, deactivate the function and reconnect the mobile phone. Office Contacts, appointments, tasks, notes, text messages, and e-mails are imported from the mobile phone into the vehicle. "Office" 4.
Mobile phone preparation Bluetooth 7. Select the functions that are to be used for the mobile phone. 8. "OK" 9. Move the MINI joystick to the left. If pairing was successful, the mobile phone appears at the top of the list of mobile phones. If the pairing was not successful: What to do if…, refer to page 170. Following the initial pairing COMMUNICATIONS 3. Select the mobile phone to be connected.
COMMUNICATIONS Mobile phone preparation Bluetooth If a device is assigned a function, this may deactivate the function in an already connected device and cause the other device to be unpaired. 5. "Remove phone from list" Exchanging the telephone and auxiliary phone If the telephone and auxiliary phone are connected to the vehicle, the function can be swapped between the two devices. 1. "Telephone" 2. "Bluetooth® (phone)" What to do if… 3. "Swap phone/addit.
Mobile phone preparation Bluetooth > Is the mobile phone paired as an auxiliary phone and is the auxiliary phone function deactivated? Activate the function. > Outgoing call not possible? Connect the mobile phone as a telephone. COMMUNICATIONS Operation Adjusting volume Is the mobile phone no longer responding? > Switch the mobile phone off and back on again. Repeat the pairing procedure. > Is the ambient temperature too high or too low? Do not subject your mobile phone to extreme ambient temperatures.
COMMUNICATIONS Mobile phone preparation Bluetooth If a contact is assigned more than one phone number, then only the name of the caller is transmitted. Entering phone numbers With calls to the auxiliary phone, only the number is displayed if it is transmitted by the network. 1. "Telephone" An incoming call on a phone will be rejected automatically when a call is active on the other phone. Dialing a number 2. "Dial number" 3. Select the digits individually. 4. Select the symbol.
Mobile phone preparation Bluetooth 3. COMMUNICATIONS Muting the microphone "Hold" The existing call is put on hold. The microphone can be muted in active calls. 1. "Telephone" 2. "Active calls" 3. "Microphone mute" 4. Dial the new phone number or select it from a list. Switching between two calls, toggling Active call: highlighted. The call on hold is identified with: "on hold...". Select the hold. symbol to switch to the call on > If a new call is made. > When switching between callers on hold.
COMMUNICATIONS Mobile phone preparation Bluetooth Phone book Redialing Displays General information The phone book accesses the contacts of the telephone and shows all contacts for which a phone number is entered. The entries can be selected to make a call. The list of dialed numbers in the telephone are transferred to the vehicle, depending on the mobile phone. The last 20 phone numbers dialed are displayed. The sorting of the phone numbers depends on the mobile phone. 1. "Telephone" 2.
Mobile phone preparation Bluetooth COMMUNICATIONS Received calls Hands-free system Displaying calls General information The list of received calls in the telephone is transferred into the vehicle, depending on the mobile phone. The last 20 calls received are displayed. The sorting and displaying of phone numbers depends on the mobile phone. Calls being conducted using the hands-free system can be continued using the mobile phone and vice versa. 1. "Telephone" 2.
COMMUNICATIONS Mobile phone preparation Bluetooth The concept Example: dialing phone numbers > The mobile phone can be operated without removing your hand from the steering wheel. 1. Briefly press the wheel. > In many cases, the entry process is supported by means of announcements or questions. 3. The system replies: {{ Please say the number.}} > {...} Verbal instructions to use with the voice operation system. > {{...}} Identifies the answers generated by the voice operation system.
Mobile phone preparation Bluetooth The entries must be entered by voice and are independent of the mobile phone's memory. Up to 50 entries can be set up. COMMUNICATIONS Notes 1. {Save name}. Do not use the voice operation system to initiate an emergency call. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a telephone connection. 2. Say the name aloud. Do not exceed a speaking duration of about 2 seconds. Ambient conditions 3.
COMMUNICATIONS Mobile phone preparation Bluetooth Installation location Removing mobile phone In the center armrest. Inserting snap-in adapter 1. Press the button and remove the cover. Press the button and remove the mobile phone. 2. Insert the snap-in adapter at the front, arrow 1, and press downward, arrow 2, until it clicks into place. Inserting mobile phone 1.
Office COMMUNICATIONS Office Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. order, for example, to correctly display appointments. Updating Every time that the mobile phone is connected to the vehicle, data are updated.
COMMUNICATIONS Office Contacts Dialing phone numbers 1. Select the desired contact. General information Contacts can be created and edited. The contacts from the mobile phone are displayed as well if this function is supported by the mobile phone. The addresses can be used as destinations for navigation and the phone numbers can be dialed. 2. Select phone number. The connection is established. Editing a contact 1. Select the desired contact. 2. "Edit contact" Displaying contacts 1. "Office" 2.
COMMUNICATIONS Office 3. "Start guidance" or "Add as another destination" Checking the address as a destination addresses that are contained in the navigation data stored in the vehicle. This ensures that route guidance is possible for all addresses. An address that is to be used in route guidance must correspond to the navigation data stored in the vehicle. The address can be checked to ensure this. Contact types 1. Select the desired contact and highlight the address.
COMMUNICATIONS Office Displaying contact pictures Message type Pictures stored with contacts are stored in the vehicle when the mobile phone is connected to the vehicle. The number of pictures transmitted depends on the mobile phone. The mobile phone must support this function. A symbol indicates the type of message. 1. "Office" Read message. Unread message. Symbol Message type Text message 2. "Contacts" 3. Open "Options". E-mail from mobile phone 4. "Configure Bluetooth®" 5.
Office Reading text messages aloud COMMUNICATIONS Calendar Reading text messages aloud, refer to page 185. Displaying calendar E-mail Displaying e-mail 1. "Office" 1. "Office" 2. "Calendar" 2. "Messages" 3. Appointments from the last 20 days and the next 50 days can be displayed. Select the desired message. Displaying e-mail contacts If the sender and receiver of an e-mail were transmitted from a mobile phone, they will be displayed in the e-mail. Appointments of the current day are displayed.
COMMUNICATIONS Office Tasks Notes Displaying task list Displaying notes Display open tasks that must be completed within the next 90 days. 1. "Office" 1. "Office" 2. "Notes" All notes are displayed. 2. "Tasks" Displaying a note Sorting task list 1. Select the desired note. 1. Select the top line in the task list. 2. To scroll through the note, if necessary: 2. To select sorting criterion: > "Priority (!)" > Select the > "Subject" symbol. Using contact data > "Due date" Displaying task 1.
Office COMMUNICATIONS Using contact data While the message is being read aloud, you have the following options: Overview > Contact data from deadlines, tasks, text messages, e-mails and notes can be stored or selected. Displaying a contact or dialing a phone number 1. "Use contact data" "Pause" Interrupt the reading. Select again to resume the reading. > "Back to beginning" Read message again from the beginning. > Select the symbol. Skip back one paragraph. > Select the symbol.
COMMUNICATIONS Office > Texts of entries are not displayed completely? Texts are already shortened by the mobile phone. Synchronization between the mobile phone and vehicle can take a few minutes. > Contact pictures are not being displayed? Up to max. 200 contact pictures can be stored in the vehicle. > If you have gone through all items in the list and still cannot activate the desired function please contact the Hotline or your MINI dealer. 186 Online Edition for Part no.
MINI Connected COMMUNICATIONS MINI Connected Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Only use software applications approved by the manufacturer of your MINI; otherwise, malfunctions may result.
COMMUNICATIONS MINI Connected Connecting via the snap-in adapter PlugIn The mobile phone can also be connected using the snap-in adapter, refer to page 177. Selected functions for a compatible Apple device are shown on the Control Display via a video link. Operation is via the MINI joystick and an onboard monitor. Using MINI Connected 1. Connecting an Apple device. > via a USB audio interface, refer to page 187.
MINI Connected COMMUNICATIONS Online Edition for Part no.
Move Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
MOBILITY Refueling Refueling Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Closing Fit the cap and turn it clockwise until you clearly hear a click.
Refueling MOBILITY Fuel specifications MINI Clubman: Gasoline For optimum fuel efficiency, the gasoline should be free of sulfur or as low in sulfur as possible. Fuels that are labeled at the pump as containing metal may not be used. Pull on the green knob with the fuel pump symbol; the fuel filler flap opens.
MOBILITY Refueling The use of poor quality fuels may result in harmful engine deposits or damage. Additionally, problems relating to drivability, starting and stalling, especially under certain environmental conditions such as high ambient temperatures and high altitudes, may occur. If drivability problems are encountered, we recommend switching to a high quality gasoline brand and a higher octane grade - AKI number for a few tankfuls.
Wheels and tires MOBILITY Wheels and tires Vehicle equipment MINI: checking the tire inflation pressure of the compact tire In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
MOBILITY Wheels and tires sures listed on the following pages in the columns for traveling speeds up to a maximum of 100 mph or 160 km/h. These tire inflation pressures can also be found on the driver's side door pillar when the driver's door is open. The maximum permitted speed for these tire inflation pressures is 100 mph or 160 km/h. Do not exceed this speed; otherwise, tire damage and accidents may occur.
MOBILITY Wheels and tires MINI Cooper tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires.
MOBILITY Wheels and tires MINI Cooper S tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temperature 195/55 R 16 87 V RSC 195/55 R 16 87 H,V M+S RSC 195/55 R 16 87 V M+S A/S RSC 2.3/33 2.3/33 2.6/38 2.
MOBILITY Wheels and tires MINI John Cooper Works tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temperature 185/50 R 17 86 H M+S XL RSC 205/45 R 17 84 V M+S RSC 205/45 R 17 84 W RSC 2.6/38 2.6/38 2.8/41 2.8/41 205/40 R 18 82 W RSC 2.8/41 2.8/41 3.0/44 3.
MOBILITY Wheels and tires MINI Cooper Clubman tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temperature 195/55 R 16 87 H RSC 195/55 R 16 87 H M+S RSC 195/55 R 16 87 V M+S A/S RSC 2.2/32 2.2/32 2.4/35 2.
MOBILITY Wheels and tires MINI Cooper S Clubman tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temperature 195/55 R 16 87 V RSC 195/55 R 16 87 H,V M+S RSC 195/55 R 16 87 V M+S A/S RSC 2.4/35 2.4/35 2.6/38 2.
MOBILITY Wheels and tires MINI John Cooper Works Clubman tire inflation pressures Tire size Tire pressures in bar/psi Speeds up to a max. of 100 mph / 160 km/h Speeds including those exceeding 100 mph / 160 km/h All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temperature 185/50 R 17 86 H M+S XL RSC 205/45 R 17 84 V M+S RSC 205/45 R 17 84 W RSC 2.6/38 2.6/38 2.7/39 3.1/45 205/40 R 18 82 W RSC 2.8/41 2.8/41 2.9/42 3.
Wheels and tires Uniform Tire Quality Grading For instance: DOT xxxx xxx 3612 Manufacturer's code for tire make Tire size and tire design Tire age Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Tread wear 200 Traction AA Temperature A DOT Quality Grades Tread wear Traction AA A B C Temperature A B C All passenger car tires must conform to Federal Safety Requirements in addition to these grades.
MOBILITY Wheels and tires Tire condition Inspect your tires regularly for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth. Tread depth The tread depth should not drop below 0.12 in/ 3 mm, although, for example, European legislation only specifies a minimum tread depth of 0.063 in/1.6 mm. At tread depths below 0.12 in/ 3 mm there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface.
Wheels and tires Run-flat tires The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall. Run-flat tires comprise a conditionally self-supporting tire and a special rim. The reinforcement in the sidewalls ensures that the tire can continue to be used subject to certain restrictions, even if depressurized. For information on continuing to drive with a flat tire, refer to Indication of a flat tire, page 73.
MOBILITY Wheels and tires marked with a clearly visible MINI designation on the sidewall of the tire. When properly used, these tires meet the highest standards in terms of safety and handling characteristics. Run-flat tires When mounting new tires or changing over from summer to winter tires and vice versa, mount run-flat tires for your own safety. Keep in mind that no space-saver spare tire is available in the event of a flat. Your MINI dealer will be glad to advise you.
Engine compartment MOBILITY Engine compartment Vehicle equipment General information In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Never attempt to perform any service or repair operations on your vehicle without the required professional technical training.
MOBILITY Engine compartment Hood Closing Releasing Close the hood from a height of approx. 16 in/ 40 cm with momentum. It must be clearly heard to engage. Pull the lever. Do not clean the windshield and headlamps if the hood is unlocked as this may damage the headlamp washer system.< Opening If you notice any signs while driving your vehicle that the hood is not completely closed, stop at once and close it securely.
Engine compartment MOBILITY Oil types for refilling Notes Do not use oil additives as this could result in engine damage.< The oil quantity corresponding to the difference between the two marks on the dipstick is 1 US quart/1 liter. Do not fill beyond the upper mark on the dipstick. Excess oil will damage the engine.
MOBILITY Engine compartment Oil change Topping off Only MINI dealers are to perform oil changes. 1. Turn the cap of the expansion tank a little counterclockwise to allow any accumulated pressure to escape, then continue turning to open. Coolant 2. Slowly fill to the correct fluid level; do not overfill. Coolant consists of half water and half additive. Not all commercially available additives are suitable for your MINI.
Maintenance MOBILITY Maintenance Vehicle equipment Service data in the remote control In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Your vehicle continuously stores servicerequirement information in the remote control while you are driving.
MOBILITY Maintenance Socket for On-Board Diagnosis OBD The primary components that make up the emissions can be checked by a device via the OBD socket. Emissions The warning lamps come on. The vehicle is producing higher emissions. You can continue your journey, but moderate your speed and exercise due caution. Have the car checked as soon as possible. Under certain circumstances, one of the lamps will flash or light up continuously. This indicates excessive misfiring or a malfunction in the engine.
Care MOBILITY Care Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Car-care products Regular cleaning and care helps to maintain the value of your MINI.
MOBILITY Care > Remove additional attachments, e.g. spoilers or telephone antennas, if there is a possibility that they could be damaged. > Insert the remote control into the ignition lock. Automatic transmission Before driving into the car wash, make sure that the vehicle can roll: 1. Place the remote control, even with Comfort Access, in the ignition lock. 2. Move the selector lever to position N. 3. Release the parking brake. 4. Switch off the engine. 5.
Care The manufacturer of the MINI recommends repairing paint damage professionally according to factory specifications with original MINI paints. Preservation Preservation is necessary when water no longer beads on the clean paint surface. To preserve the paint, only use preservatives that contain carnauba or synthetic waxes. MOBILITY Internal care Upholstery/fabrics Regularly use a vacuum cleaner to remove surface dirt.
MOBILITY Care tened again after they have been removed, e.g. for cleaning.< Floor mats can be removed to be cleaned. If the carpets are very dirty, clean with a microfiber cloth and water or an interior cleaner. When doing so, rub forward and back in the driving direction; otherwise, the carpet may become matted. CD/DVD drives Do not use cleaning CDs as this could damage parts of the drive.< Vehicle storage If you park your vehicle longer than three months, ask your MINI dealer to advise you.
Replacing components MOBILITY Replacing components Vehicle equipment MINI Clubman In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
MOBILITY Replacing components 5 Special wrench for removing the spacesaver spare tire 6 Flat screwdriver/Phillips screwdriver 7 Towing eyelet 8 Lifting handle 1. Fold out the wiper arm and hold it. MINI Clubman 2. Compress the locking spring, arrows 1, and pivot it toward the wiper blade, arrow 2. 3. Hold locking spring pressed and remove wiper blade from wiper arm, arrow 3. 4. Slide the new wiper blade onto the windshield wiper arm until it audibly engages.
Replacing components MINI Clubman: changing the rear wiper blade MOBILITY any instructions provided by the bulb manufacturer.< Caring for headlamps, refer to page 214. For any bulb replacement not described below, contact a MINI dealer or a workshop that has specially trained personnel working in accordance with the specifications of the MINI manufacturer.< For checking and adjusting headlamp aim, please contact your MINI dealer.< 1. Fold out the wiper arm and hold it. Light-emitting diodes LEDs 2.
MOBILITY Replacing components carried out only by your MINI dealer. Due to high voltage, there is a risk of fatal injury if work on the xenon lamps is carried out improperly.< Replacing the bulb 1. Turn the lamp counterclockwise, arrow 1, and remove it, arrow 2. Halogen low beams and high beams H13 bulb, 60/55 watts The H13 bulb is pressurized. Therefore, wear safety glasses and protective gloves. Otherwise, there is a risk of injury if the bulb is damaged.
Replacing components Replacing a turn signal bulb MOBILITY 3. Unscrew the upper bulb counterclockwise. 21 watt bulb, PY 21 W 1. Turn in the wheel. 2. Remove cover 1. To do so, turn the cover counterclockwise. 3. Remove the inside cover. To do so, turn the cover counterclockwise. 4. To insert the new bulb and replace the cover, proceed in reverse order. Replacing a fog lamp bulb H8 bulb, 35 watts 1. Turn in the wheel. 4. Unscrew the bulb counterclockwise. 2. Remove cover 2.
MOBILITY Replacing components Side turn signals MINI Clubman 5 watt bulb, W 5 W 1. Push the lamp with the ventilation grate forward and remove. 1 Brake light 2 Turn signal 3 Tail lamp LED 2. Unscrew the bulb holder counterclockwise. 4 Rear fog lamp 3. Pull out and replace the bulb. 5 Backup lamps 4. To insert the new bulb and replace the cover, proceed in reverse order. MINI: changing Tail lamps 1. Remove the cover from the sidewall of the cargo area.
Replacing components 3. To insert the new bulb and replace the cover, proceed in reverse order. MINI Clubman: changing 1. Using the screwdriver from the toolkit, remove the screw at the top. 2. Swing out the tail lamp and remove it toward the top. 3. Disconnect the cable connector if necessary, arrow 1. MOBILITY MINI: rear fog lamps/reverse lights Bulbs 16 Watt, W 16W Access the lamps via the rear or underside of the bumper. 1. Press fastening clips, arrows, together and remove the lamp holder. 2.
MOBILITY Replacing components MINI: license plate lamps 5 watt bulb, C 5 W 1. Using a screwdriver, push the lamp to the left in the tab of the lamp housing, arrow 1. 2. Remove the lamp, arrow 2. 3. Replace the bulb. 4. Insert the lamp. MINI Clubman: license plate lamps 5 watt bulb, C 5 W Repairing a flat tire Safety measures in the event of a breakdown: Park the vehicle as far as possible from moving traffic and switch on the hazard warning flashers.
Replacing components Sealant and compressor MOBILITY Using the Mobility Kit To repair a tire puncture with the Mobility Kit, proceed as follows: > Filling the tire with sealant. > Distributing the sealant. > Correct the tire inflation pressure. Filling the tire with sealant. 1 Sealant bottle and adhesive label with speed limit 2 Filling hose Note the use-by date on the sealant bottle.< Proceed in the specified order; otherwise, sealant may emerge under high pressure.< 1. Shake the sealant bottle. 2.
MOBILITY Replacing components to about 5 bar/73 psi. Do not switch off the compressor during this phase.< Do not run the compressor for longer than 10 minutes; otherwise, the device will overheat and possibly be damaged.< Adjusting the tire pressure 1. After driving approx. 3.1 miles/5 km or 10 minutes, stop at a suitable location. 2. Screw the connection hose 6 of the compressor directly onto the tire valve. 8. Switch off the compressor. 3.
Replacing components Changing wheels MOBILITY 3. Screw the lifting handle from the toolkit onto the thread. Run-flat tires Tire change for run-flat tires: > Prepare for tire change, page 228 > Jack up vehicle, page 228 > Tighten lug bolts, page 229 Space-saver spare tire Tire change with space-saver spare tire: > Remove the space-saver spare tire, page 228 4. Raise the lifting handle slightly. 5. Squeeze the securing spring.
MOBILITY Replacing components 12. Unscrew the dust cap from the extension and place it on the valve of the space-saver spare tire. Preparing for a tire change Due to its different dimensions, the damaged wheel cannot be placed in the recess for the space-saver spare tire.< Additional safety measures when changing tires: Only change the tire when parked on a surface that is level, firm and not slippery.
Replacing components The jack base must be perpendicular to the surface beneath the jacking point. MOBILITY Vehicle battery Maintenance The battery is maintenance-free; that is, the electrolyte will last for the life of the battery when the vehicle is operated in a temperate climate. Battery replacement 2. During jacking up, insert the jack head in the square recess of the jacking point. 3. Jack the vehicle up until the wheel you are changing is raised off the ground.
MOBILITY Replacing components Disposal Fuses After replacing old batteries, return the used batteries to your MINI dealer or to a recycling center. Maintain the battery in an upright position for transport and storage. Always secure the battery against tipping over during transport.< Do not attempt to repair a blown fuse or replace it with a fuse of a different color or Ampere rating. To do this could cause a fire in the vehicle resulting from a circuit overload.
Giving and receiving assistance MOBILITY Giving and receiving assistance Vehicle equipment MINI Clubman In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Roadside Assistance Roadside Assistance is available by phone 24 hours a day in many countries.
MOBILITY Giving and receiving assistance MINI Clubman Connecting jumper cables Connect the jumper cables in the correct order, so that no sparks which could cause injury occur.< 1. Open the battery cover in the engine compartment to access the positive terminal of your MINI. In the cargo area under the loading sill. Open the center lock to take it out. Jump-starting If the car's own battery is flat, your MINI's engine can be started by connecting two jumper cables to another vehicle's battery.
Giving and receiving assistance Body ground in MINI: MOBILITY Using a tow fitting The screw-in tow fitting must always be carried in the car. It can be screwed in at the front or rear of the MINI. It is stored in the toolkit in the cargo area underneath the cover on the right-hand side, page 217. 6. Attach the second terminal clamp of the minus/– jumper cable to the negative terminal of the battery or to the engine or body ground of the vehicle to be started. Starting the engine 1.
MOBILITY Giving and receiving assistance Pull out the bottom of the cover panel of the towing eye in the bumper, arrow. Towing with a tow bar The towing vehicle must not be lighter than the towed vehicle; otherwise, it may be impossible to maintain control.< The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an angle, please observe the following: > Clearance and maneuvering capability will be sharply limited during cornering.
Giving and receiving assistance MOBILITY Tow-starting Avoid tow-starting the vehicle whenever possible; instead, jump-start the engine, page 232. Vehicles with a catalytic converter should only be tow-started when the engine is cold, vehicles with an automatic transmission cannot be towstarted at all. 1. Switch on hazard warning flashers, comply with local regulations. 2. Switch on the ignition, page 47. 3. Shift into 3rd gear. 4.
Find Me. Online Edition for Part no.
AT A GLANCE CONTROLS DRIVING TIPS NAVIGATION ENTERTAINMENT COMMUNICATIONS MOBILITY REFERENCE Online Edition for Part no.
REFERENCE Technical data Technical data Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available, for example due to the selected options or national-market version. This also applies to safety related functions and systems. Engine data Displacement cu in/ cmμ Number of cylinders Cooper Cooper S John Cooper Works 97.5/ 1,598 97.5/ 1,598 97.
Technical data REFERENCE Dimensions MINI Online Edition for Part no.
REFERENCE Technical data Cooper Cooper S, John Cooper Works 1 Vehicle height without roof antenna 55.4/1,407 55.4/1,407 2 Track, front 57.4/1,459 57.2/1,453 3 Vehicle width, with outside mirror 75.3/1,913 75.3/1,913 4 Track, rear 57.8/1,467 57.5/1,461 5 Vehicle width, without outside mirror 66.3/1,683 66.3/1,683 6 Wheelbase 97.1/2,467 97.1/2,467 7 Vehicle length 146.6/3,723 146.8/3,729 with aerodynamic bumpers All dimensions in in/mm. Minimum turning radius dia.
Technical data REFERENCE MINI Clubman Online Edition for Part no.
REFERENCE Technical data Cooper Cooper S, John Cooper Works 1 Vehicle height without roof antenna 56.1/1,426 56.4/1,432 2 Track, front 57.4/1,459 57.2/1,453 3 Vehicle width, with outside mirror 75.3/1,913 75.3/1,913 4 Track, rear 57.8/1,467 57.5/1,461 5 Vehicle width, without outside mirror 75.3/1,913 75.3/1,913 6 Wheelbase 100.3/2,547 100.3/2,547 7 Vehicle length 155.9/3,961 155.9/3,961 All dimensions in in/mm. Minimum turning radius dia.: 36 ft/11.0 m.
REFERENCE Technical data Load Cooper Cooper S John Cooper Works lbs/kg Approved front axle load > Manual transmission lbs/kg 1,830/830 1,918/870 1,929/875 > Automatic transmission lbs/kg 1,907/865 1,962/890 1,973/895 Approved rear axle load lbs/kg 1,664/755 1,664/755 1,676/760 Approved roof load capacity lbs/kg 165/75 165/75 165/75 cu ft/ 5.7 - 24.0/ 5.7 - 24.0/ 5.7 - 24.
REFERENCE Technical data Capacities US gal/US quarts Liters Fuel tank 13.2/– approx. 50 including reserve of 2.1/– approx. 8 Window washer system incl. headlamp washer system –/4.8 approx. 4.5 244 Notes Fuel grade: page 193 For more details: page 55 Online Edition for Part no.
Short commands for the voice activation system REFERENCE Short commands for the voice activation system Vehicle equipment General information In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems. Instructions for the voice activation system, refer to page 21.
REFERENCE Short commands for the voice activation system CD/Multimedia CD drive Function Command Playing a CD {C D on} Selecting a CD {Select C D} Selecting a CD and track {C D … track …} e.g. CD 3 track 5 Selecting a track {Track …} e.g. track 5 or {C D track …} e.g.
Short commands for the voice activation system REFERENCE Radio FM Function Command Selecting the radio {Radio} Selecting FM stations {F M} Selecting manual search {Manual} Selecting the frequency range {Select frequency} Selecting a station {Select station} e.g.
REFERENCE Short commands for the voice activation system Stored stations Function Command Selecting stored stations {Presets} Choosing a stored station {Select preset} Selecting a stored station {Preset …} e.g.
Short commands for the voice activation system REFERENCE Office Function Command Calling up the Office menu {Office} Displaying Current office {Current office} Displaying contacts {Contacts} Displaying messages {Messages} Displaying calendar {Calendar} Displaying tasks {Tasks} Displaying reminders {Reminders} Navigation General information Function Command Navigation menu {Navigation} Selecting destination entry {Enter address} Entering an address {Enter address} Selecting route gu
REFERENCE Short commands for the voice activation system Function Command Selecting route {Route information} Switching on the voice instructions {Switch on voice instructions} Repeating a voice instruction {Repeat voice instructions} Switching off the voice instructions {Switch off voice instructions} Displaying the address book {Address book} Displaying the last destinations {Last destinations} Accessing traffic bulletins {Traffic Info} Special destinations {Points of interest} Map Fun
Short commands for the voice activation system REFERENCE Vehicle information Function Command Accessing the onboard computer {Onboard info} Accessing the trip computer {Trip computer} Accessing vehicle information {Vehicle info} Accessing vehicle status {Vehicle status} Settings Vehicle Function Command Opening the main menu {Main menu} Accessing settings {Settings} Accessing options {Options} Settings on the Control Display {Control display} Accessing time and date settings {Time and
REFERENCE Everything from A to Z Everything from A to Z Index A ABS Antilock Brake System 69 Accepting a call 159, 171 Accessories, see Vehicle equipment 4 Acknowledgment signals for locking/unlocking vehicle 28 Activated-charcoal filter for automatic climate control 89 Adaptive Light Control 82 Adding engine oil 209 Additives – coolant 210 – engine oil 209 Address, entering 118 Address for navigation – entering 112, 118 Adjusting temperature inside the car, refer to Air conditioner 86 Adjusting temperatu
REFERENCE Everything from A to Z B Background lighting, refer to Ambient lighting 84 Backrests, refer to Seats 39 Backup lamps – replacing bulb 222, 223 Band-aids, refer to First aid pouch 231 Bar, refer to Tow-starting, towing away 234 Base plate for telephone or mobile phone – refer to Snap-in adapter 177 Bass sounds, refer to Tone control 133 Battery 229 – disposal 35, 230 – jump-starting 232 – temporary power failure 230 Battery renewal – remote control 35 Being towed 234 Belts, refer to Safety belts
REFERENCE Everything from A to Z Car wash, care 213 Car washes 213 Catalytic converter, refer to Hot exhaust system 101 CD, audio playback 143 CD player 143 – controls 132 – fast forward/reverse 144 – random order 144 – selecting a track 143 – switching on/off 132 – tone control 133 – volume 133 Center armrest 95 Center brake lamp 224 Center console, refer to Around the center console 14 Central locking system 27 – Comfort Access 33 – from inside 30 – from outside 27 Changing bulbs 219 Changing the langua
REFERENCE Everything from A to Z Deactivating front passenger airbags 78 Deadlocking, refer to Locking 28 Defect – door lock 29 Defective – fuel filler flap 192 Defining a home address 181 Defogging windows 87, 89 Defrosting windows 87, 89 Defrosting windows and removing condensation – air conditioner 87 – automatic climate control 89 Defrosting windshield, refer to Defrosting windows 87, 89 Defrost position, refer to Defrosting windows 87, 89 Deleting contacts 165, 182 Destination address – entering 112,
REFERENCE Everything from A to Z Engine malfunction – indicator lamp 13 Engine oil – additives, refer to Approved engine oils 209 – alternative oil types 209 – approved engine oils 209 – capacity 209 – checking level 208 – dipstick 208 – intervals between changes, refer to Service requirements 61 – MINI Maintenance System 211 Engine oil level, checking 208 Engine output, refer to Engine data 238 Engine starting, refer to Starting the engine 48 Entering destination 112 Entering intersection 113 Entertainme
REFERENCE Everything from A to Z Gear shifting – automatic transmission 50 – manual transmission 49 Gearshift lever – automatic transmission with Steptronic 50 – manual transmission 49 General driving notes 100 Glass roof, electric 35 – convenience operation 28 – opening, closing 36 – remote control 28 – tilting 36 Glove compartment 94 GPS navigation, refer to Navigation system 110 Grills, refer to Air vents 86 Gross vehicle weight, refer to Weights 242 H Halogen lamps – replacing bulb 220 Handbrake, ref
REFERENCE Everything from A to Z Internal care 215 Internet page 4 J Jacking points 228 Jets, refer to Window washer nozzles 54 Joystick, refer to Onboard computer 16 Jumpering, refer to Jumpstarting 232 Jump-starting 232 K Key, refer to Keys/remote controls 26 Keyless-Go, refer to Comfort Access 33 Keyless opening and closing, refer to Comfort Access 33 Key Memory, refer to Personal Profile 26 Keypad dialing 161, 173 Kickdown 50 – automatic transmission with Steptronic 50 Knock control 193 L Lamps, re
REFERENCE Everything from A to Z Microfilter/activated-charcoal filter – MINI Maintenance System 211 Microphone for telephone 14 MINI Connected 187 MINI Internet page 4 MINI joystick, refer to Onboard computer 16 MINI Maintenance System 211 Mirror dimming feature 43 Mirrors 42 – exterior mirrors 42 – heating 42 – interior rearview mirror 42 Mobile phone – adjusting volume 159, 171 – connecting, refer to Mobile phone, pairing 156, 167 – installation location, refer to Center armrest 95 – pairing 156, 167 –
REFERENCE Everything from A to Z P R Paintwork, care 214 Park Distance Control PDC 68 Parking – vehicle 48 Parking aid, refer to Park Distance Control PDC 68 Parking brake 49 – indicator lamp 13 Parking lamps, replacing bulb 220 Parking lamps/low beams 81 Parts and accessories, see Vehicle equipment 4 Pathway lighting 82 Personal Profile 26 Phone numbers – dialing 160, 172 Pinch protection system – windows 37 Plastic parts, care 216 Pollen – refer to Microfilter/activatedcharcoal filter for automatic cl
REFERENCE Everything from A to Z Road worthiness test, refer to Service requirements 61 Roof load capacity 242 Roof-mounted luggage rack 106 Rope, refer to Tow-starting, towing away 234 Route 121, 122 – bypassing sections 122 – changing 121, 122 – changing criteria 121 – displaying arrow view 122 – displaying map view 123 – displaying streets or towns/ cities 122 – selecting 121 Route guidance 121 – bypassing a route section 122 – changing specified route 121 – distance and arrival 121 – voice instruction
REFERENCE Everything from A to Z Side windows, refer to Windows 36 Signal horn, refer to Horn 10 Sitting safely 38 – airbags 38 – safety belts 38 – with head restraint 38 Size, refer to Dimensions 239 Sliding/tilt sunroof – refer to Glass roof, electric 35 Slot for remote control 47 Smokers' package, refer to Ashtray 96 Snap-in adapter – inserting/removing 177 – use 166 Snap-in adapter, refer to Center armrest storage compartment 95 Snow chains 206 Socket, refer to Connecting electrical appliances 97 Sock
REFERENCE Everything from A to Z Telephone – hands-free system 163, 175 – installation location, refer to Center armrest 95 – voice commands 175 Telephone receiving power, refer to Status information 19 Temperature display – setting the units 60 Temperature of coolant, refer to Coolant temperature 210 Temperature setting – air conditioner 87 – automatic climate control 89 Tempomat, refer to Cruise control 55 Tensioning straps, refer to Securing cargo 105 Text message 182 Third brake lamp, refer to Center
REFERENCE Everything from A to Z Trip odometer 58 Turning circle, refer to Dimensions 239 Turn signal – front, replacing bulb 220 – indicator lamp 12, 13 – rear, replacing bulb 222 – side, replacing bulb 222 Turn signals 52 Tying down loads, refer to Cargo loading 105 U Uniform Tire Quality Grading UTQR 203 Units – average fuel consumption 60 – temperature 60 Universal garage door opener, refer to Integrated universal remote control 90 Universal remote control 90 Unlatching, refer to Unlocking 34 Unlocki
Everything from A to Z REFERENCE Word matching principle for navigation 120 Work in the engine compartment 208 Wrench/screwdriver, refer to Toolkit 217 X Xenon lamps – replacing bulb 219 Online Edition for Part no.
01 40 2 917 320 ue *BL291732000I* DRIVE ME. Online Edition for Part no.
