Owner`s manual

CONTROLS Driving

5. Move the selector lever into the desired

position by pressing the button on the front

of the selector lever.

Before manually unlocking the selector

lever lock, firmly set the parking brake to

prevent the vehicle from rolling away.<

Turn signals/

headlamp flasher

1 Turn signals

2 Headlamp flasher

Using turn signals

Press the lever beyond the resistance point.

To turn off manually, press the lever to the resis-

tance point.

Unusually rapid flashing of the indicator

lamp indicates that an indicator bulb has

failed.<

Signaling a turn briefly

Press the lever as far as the resistance point for

as long as you wish to signal a turn.

Triple turn signal activation

Press the lever as far as the resistance point.

You can set whether the turn signal flashes once

or three times.

1. "Settings"

2. "Lighting"

3. "Triple turn signal"

The setting is stored for the remote control cur-

rently in use.

Wiper system

Do not turn on the wipers when they are

frozen; otherwise, the wiper blades and

the windshield wiper motor may be damaged.<

Do not use the windshield wipers when

the windshield is dry; otherwise the wiper

blades may wear out faster or be damaged.<

1 Switching on wipers

2 Switching off wipers or brief wipe

3 Activating/deactivating intermittent wipe or

rain sensor

4 Cleaning windshield and headlamps

Switching on wipers

Press the lever upward, arrow 1.

The lever automatically returns to its initial posi-

tion when released.