Instruction manual

Adaptto E-drives Lab. 2013
5.Health Monitor
There are several parameters that could be
useful for controller setup and diagnostics.
First string: important controller voltages.
Second string: motor hall sensor voltage.
Third string: motor temperature.
Forth string: hall sensors positions.
Fifth string: service information and protection.
Last string: internal controller temperature.
6. Stats\Watt-meter
The following screen shows trip and battery statistics:
Upper left corner: current SOC (state of charge)
Current trip fom last reset : Used power in WH
Moving time from last reset : Used power in AH
Remaining range : Remaining WH
Average moving speed : Avg consumption
Maximum recorded speed : Max consumption
Regen capacity AH : Regen WH
Average battery voltage : Battery iRe
To reset current trip\or set Full Charge after charging please press <up> button.
From the stats\watt-meter screen you can also go <down> to Total Statistics:
Odometer : Total KWH used
Number of cycles : Full battery cycles
Current battery WH : Maximum recorded WH
Current battery AH : Maximum recorded AH
Current battery iRe : Minimum recorded iRe
From Total Statistics screen you can go <down> to Charge screen (also appear when you press
<up> button from the main screen in Charge mode):
Current SOC counted in WH : Charge power W
How much WH is remaining to : full charge WH
Power supply Current : Battery charge current
How much time is remaining to Full charge.
11