Instruction manual

Adaptto E-drives Lab. 2013
3.Menu and functions
---------------------
| Menu |
|> SET RANGE | 1)
| POWER MODE PROFILES| 2)
| CONTROLLER SETUP | 3)
| INTERFACE | 4)
| BMS SETUP | 5)
| Activate SmartPower |
| |
---------------------
(1) Smart Power menu.
Using this feature you can set the limit of capacity you are planning to spend
per known range and the controller will limit your power to allow you reach
the destination.
---------------------
| SmartRange setup |
|>Range 010.0Km| The range you are planning to cover
| Power amount 04.0Ah | Amount of power to spend
| Power range 01.3Ah | Additional power allowed.
| Go | Start current trip
| |
| |
| |
---------------------
(2) This menu is for setting 3 power profiles according to your needs.
---------------------
| Profiles Setup |
| |ECO|NORM |[BST] | profile name
|Ib A|10 | 25 | 100 | battery current limit
|Ip A|99 | 120 | 180 | phase current limit
|IprA|10 | 20 | 75 | regen power = regen phase current
|Skph|25 | 99 | 120 | speed limit
|Acc |16 | 25 | 32 | acceleration limit
| |
---------------------
6