Installation Guide

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters;

electrical tape.

INSTALLING THE MOUNTING BRACKET

WARNING: All of the parts, hardware and components have been provided for your

safety and the proper installation of your new ceiling fan. The use of other parts,

hardware or components not supplied by Minka Aire

with the fan will void the

Minka Aire

Warranty.

REMEMBER to turn off the power. Follow the steps below to hang your fan properly:

Step 1. Attach the mounting bracket to the outlet box with two screws provided with

your outlet box. Make sure the bracket is firmly secured. (Fig. 1)

Step 2. Lift fan into position by secure the safety cable onto the hook from the ceiling

mounting bracket. (Fig. 1)

FIG. 1

OUTLET BOX

MOUNTING BRACKET

MOTOR

SAFETY CABLE