Installation Guide

TROUBLESHOOTING

SYMPTOM

Fan will not start

Check to make sure the wall switch is turned on.

Check circuit fuses or breakers.

Caution! Make sure the power is turned off before performing the

following steps.

Remove canopy and check wire connections.

Check wall control transmitter connections (if applicable).

Note: Fan must be installed at a maximum distance of 40 feet from

the transmitting unit for proper signal transmission between the

transmitting unit and the fan's receiving unit.

SOLUTION

SYMPTOM

Fan Sounds Noisy

Allow a 24-hour "break in" period. Most noises associated with a new

fan will go away during this time.

Make sure the screws that attach the fan blade holder to the motor

hub is tight.

Make sure outlet box is secured to building structure, if necessary

use the wood screws provided to further secure outlet box to joist.

Make sure hanger bracket is secure to the outlet box, screws are

tight.

SOLUTION