Installation Guide

SYMPTOM
Fan Wobble
NOTE: All blade sets are grouped by weight. Because wood and
plastic blades vary in density, the fan may wobble even though
blades are matched.
Make sure outlet box is secured to building structure, if necessary
use the wood screws provided to further secure outlet box to joist.
Make sure hanger bracket is secure to the outlet box, screws are
tight.
If a Balancing kit is provided follow the instructions included with
the balancing kit to help correct any excessive wobble.
SOLUTION
SYMPTOM
Fans/Light Turn On and Off Unexpectedly
This is caused by interference, Please see "Frequency interference" for
steps to change the frequency.
SOLUTION
SYMPTOM
Lights shut off and will not come back on.
This unit is equipped with a wattage limiting device. Lamping in
excess of 75 watts will disable your ceiling fan’s light kit. To reset
your light kit you must turn the power off and re lamp, keeping the
wattage under 75 watts. Restore power to your ceiling fan and
continue normal operation.
SOLUTION