Specification

Tools Required: Phillips screw driver; slotted screw driver; step-ladder; wire cutters; electrical tape.

INSTALLING THE MOUNTING BRACKET

WARNING: All of the parts, hardware and components such as the hanger bracket and hanger ball have

been provided for your safety and the proper installation of your new ceiling fan. The use of other parts,

hardware or components not supplied by Minka Aire

with the fan will void the Minka Aire

Warranty.

REMEMBER To turn off the power. Follow the steps below to hang your fan properly.

Step 1. Attach the mounting bracket to the outlet box with two screws and washers provided. Make sure

the bracket is tight and secured. (Fig. 1)

Step 2. Lift fan into position by hanging the motor assembly onto the hook from the ceiling mounting

bracket allowing it to hang freely. (Fig. 1)

FIG. 1