Installation & Assembly

ASSEMBLY INSTRUCTIONS for Fan
Light Kit, Model # K34L
BE SURE TO FOLLOW ALL STEPS IN THE ORDER GIVEN.
BE SURE POWER IS OFF AT FUSE, OR CIRCUIT BREAKER BOX.
CAUTION: Before starting installation, disconnect the
power by turning off the circuit breaker or removing
the fuse at fuse box.
1. Remove the switch housing cover from the switch
housing.
2. Remove the plug from the bottom of the switch
housing cover and discard it. Feed wires from light
kit through the hole on the switch housing cover
and screw light kit. Secure with washer and hex nut
provided. Make sure is securely tighten to prevent it
from vibrating loose. (Fig. 1)
3. Make the wire connections; Connect the white and
black wires from the light kit to the white and blue
wires from the switch housing labeled "FOR
LIGHT". Connect the white wire to the white wire
and the black wire to the blue wire. (Fig. 2)
4. Re-attach the switch housing cover with light kit
attached to the switch housing and secure with the
screws previously removed. (Fig. 2)
5. Insert the 4x9 Watt LED bulbs (provided) and glass
shades (sold separately). Do not over-tighten
thumb screws. (Fig. 3)
READ AND SAVE THESE INSTRUCTIONS
Fig. 2
Light kit
Screws
Fig. 3
Light kit
Screws
Bulbs
Glass shade
CAUTION: To reduce The Risk Of Fire And Electric
Shock, This Light Kit Should Be Used Only With The
Fan Models Listed Below:
Models: AC-542/AC-552/AC-652/AC-742.
Manufactured By Air Cool Industrial Co, Ltd.
Approximate maximum weight:
K34L: 2.11 lbs
Fig. 1
Lock washer
Switch housing
cover
Nut
Plug
Manual design and all elements of manual design
are protected by U.S. Federal and/or State Law,
including Patent, Trademark and/or Copyright
laws.