Installation Sheet

FLAT

WASHERS

Fig. 7

SPRING

WASHERS

HEX NUTS

Fig. 5

KNOCK OUT

OUTLET

BOX

Fig. 10

SUPPLY

WIRES

DOWNROD

Fig. 8

HITCH

LOCK

SET SCREWS

Fig. 9

DOWNROD

CROSS PIN

HANGER

BALL

SET SCREW

Fig. 6

FLAT WASHERS

WOOD SCREWS

LOCK WASHERS

OUTLET

BOX

HANGER

BRACKET

PLATE

NOTE: DO NOT INSTALL THE COUPLING COVER AND DECORATIVE RING IF YOU PLAN TO USE THE MINIMUM LENGTH DOWNROD.

Step 8. Now lift motor assembly into position and place hanger ball into hanger bracket. Rotate until the check groove has dropped into the

registration slot and seats firmly. (Fig. 12) Rod should not rotate if this is done correctly.