Installation Sheet

OPERATING THE REMOTE CONTROL/WALL

TRANSMITTER

Restore Power to Ceiling Fan.

A. Buttons:

These buttons are used to set the fan speeds as follows;

= Low Speed

= Medium Speed

= High Speed

B. Button:

This button turns the fan off.

C. Button:

These buttons turn the light ON or OFF and also control

the brightness settings of the light. The following

instructions apply to ceiling fans that feature a DOWN

light ( button) only or ceiling fans that feature an UP

light ( button) and a DOWN light ( button) that are

controlled independent of each other;

Press and release the button for the desired light to turn

the light ON or OFF. Press and hold the button to set the

desired light brightness. The light will cycle between

bright and dim settings as long as the button is pressed.

The light key has an automatic auto-resume feature that

allows the light to remain at the same brightness as the

last time it was turned off.

D. OFF-ON Slide Button (Wall Control Fans Only)

This button turns the power Off and On to the Fan and

Light(s).

E. Button: This button rotates the fan assembly at 3

RPM.

NOTE: The complete fan assembly is designed to rotate

in one direction however, when blocked it will

automatically turn to the opposite direction. The

rotation change will not have any effect on the

performance of the fan.

Note: The rotation feature is only available when the

turbo fans are in operation.