9222-2890-11 AV-A304/ME200304 E HARDWARE MANUAL
For proper and safe use Read and understand all warnings and cautions before using this product. WARNING • Use only within the voltage range specified on the unit. Inappropriate current may cause damage or injury through fire or electric shock. • Use only the specified AC adapter (Ya Hsin Industrial 019-240840) within the voltage range indicated on the adapter unit. An inappropriate adapter or current may cause damage or injury through fire or electric shock. • Do not disassemble this product.
• This product should only be operated in the upright position. Inappropriate placement may result in fire. • Insert the plug securely into the electrical outlet. • Do not use if the cord is damaged. • Do not connect the ground to a gas pipe, telephone ground, or water pipe. Improper grounding can result in injury from electric shock. • Do not cover the AC adapter. A fire may result. • Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit in emergencies.
Before you begin Thank you for purchasing this Minolta product. Please take the time to read through this instruction manual so you can enjoy all the features of your new scanner. Check the packing list before using this product. If any items are missing, immediately contact your dealer. DiMAGE Scan Elite 5400 scanner Scanner Stand Slide Mount Holder SH-M10 35mm Film Holder FH-M10 USB Cable UC-2 IEEE1394 Cable FC-2 AC Adapter Reset Tool DiMAGE Scan Utility CD-ROM Adobe Photoshop Elements 2.
Table of contents This manual contains information specific to this model scanner. This includes hardware setup and use as well as notes about software operation, compatibility, and system requirements. See the supplied DiMAGE Scan Utility software manual for information on the installation and operation of the scanner software. System requirements ........................................................................................6 Names of parts .......................................................
System requirements The computer and the operating system must be guarantied by the manufacturer to support IEEE 1394 (FireWire), or USB interface. To use the scanner, your computer system must meet the following requirements: Pentium 166 Mhz or later processor. Pentium III or later recommended. PowerPC G3 or later. PowerPC G4 or later recommended. USB: Windows 98, 98 Second Edition, 2000 Professional, Me, or XP. USB: Mac OS 8.6 to 9.2.2 and Mac OS 10.1.3 to 10.1.5 and 10.2.1 to 10.2.
Names of parts Indicator lamp Power switch USB port Front door Quick Scan button IEEE 1394 port Eject button DC terminal Focus dial Do not use the focus dial until is has been activated in the DiMAGE Scan Utility’s preferences dialog box. See the DiMAGE Scan software manual for details. Scanner setup Attaching the scanner stand A scanner stand has been supplied for added stability. Simply place the scanner in the stand. The feet on the bottom of the scanner unit should not rest on the stand.
Before connecting the scanner to a computer Before connecting the scanner to a computer, the DiMAGE Scan Utility must first be installed. Read the software instruction manual for the installation procedure. The scanner should be placed on a level surface free from vibrations. It should be located away from direct sunlight and in a clean, dry, well-ventilated area. Never connect the scanner cable while data is being transferred between the computer and peripheral devices.
Connecting the IEEE 1394 (FireWire) cable Securely plug the cable into the scanner’s and computer’s IEEE 1394 port. Either end of the cable can be connected to the IEEE 1394 port on the scanner or computer. The scanner should be connected directly to the computer. Attaching the scanner to an IEEE hub may prevent proper operation. When the scanner is initially connected to a computer with a Windows 98, 98SE, or 2000 Professional operating system, the found-new-hardware wizard will appear briefly.
Loading the film holders Handling film To achieve the best possible reproduction from the scanner, the film and film holder should be free from dust and dirt. Always work with processed film in a clean, dust-free environment. Handle film by the edges or mount to prevent fingerprints and dirt marring the image area. Special lint free gloves are available from photographic equipment retailers for film handling as well as antistatic cloths, brushes, and blowers for removing dust.
Loading mounted slides Up to four mounted 35mm or APS slides can be inserted into the slide mount holder. The slide mounts must be between 1 mm and 3.2 mm thick to fit the holder. Glass mounts cannot be used; the glass refracts the light resulting in distorted and unevenly illuminated scans. Do not leave slide mounts in the holder. To open the holder, lift the latches and open the cover. Insert the slides into the holder emulsion side down.
Loading a film holder into the scanner Before using the scanner, install the DiMAGE Scan Utility; see the software instruction manual. Turn on the scanner and then start the computer. Launch the DiMAGE Scan Utility before inserting the film holder. Do not insert the film holder into the scanner while the utility software is launching or the scanner is initializing; the indicator lamp blinks during this period.
Scanner notes Compatibility with the DiMAGE Scan Utility The DiMAGE Scan software is compatible with many of Minolta’s high-end film scanners. This means only one scanner driver needs to be installed on a computer with multiple scanner models connected. Because of the differences in specifications between scanners, some of the DiMAGE Scan functions cannot be used with this scanner model.
The Quick Scan button and DiMAGE Scan Launcher The Quick Scan button launches the DiMAGE Scan applications. When the button is pressed, the DiMAGE Scan launcher is displayed. Simply click on one of the launcher buttons to start the appropriate application. There should be no holder in the scanner. Quick Scan button When the Batch Scan Utility button is clicked, the scanner will initialize.
The Quick Scan button can be used to launch a single application directly. Simply select the application from the drop-down menu at the bottom of the launcher; each time the Quick Scan button is pressed, that application will open along with the launcher. If the Batch Scan Utility is selected, the first time the Quick Scan button is pressed the scanner initializes and then the message to insert the holder is displayed. To scan subsequent holders, simply insert the holder and press the Quick Scan button.
Manual focus dial The scanner can be focused manually using the focus dial. The manual focus dial must first be activated in the DiMAGE Scan Utility preferences window, see “Setting scanner preferences” in the advanced scanning section of the software manual. When the manual focus dial is active the scanner’s autofocus system is disabled and the other scanner focusing functions will not work. With the image displayed in the prescan tab, click the manual-focus button.
Digital ICE system requirements The computer must meet the system requirements below to use Pixel Polish. PC / AT compatible computers Macintosh computers 256 MB of RAM. 512 MB recommended. 256 MB of RAM in addition to the requirements for the OS and applications. 512 MB recommended. 1.2 GB of hard-disk space. 2.0 GB recommended. Adobe Photoshop Elements Take time to register your copy of Photoshop Elements with Adobe. You can register online, by fax, or by mail.
Job file list Jobs can be used to make scan settings based on the final use of the image. See making-thefinal-scan section in the DiMAGE Scan software manual.
Disconnecting the scanner Never disconnect the scanner when the indicator lamp is blinking. Disconnecting the USB cable Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the scanner off and then disconnect the cable. Disconnecting the IEEE cable with 2000 professional, XP, and Macintosh Quit the DiMAGE Scan Utility. Confirm that the scanner indicator lamp is not blinking. Turn the scanner off and then disconnect the cable.
Troubleshooting This section covers minor problems with scanner operation. For major problems or damage, or if a problem continues to reoccur frequently, contact your dealer or a Minolta service facility. SYMPTOM or MESSAGE SOLUTION When starting up the utility software, could-notconfirm-scanner-connection message appears. Confirm the cable is securely connected between the computer and scanner. Turn the scanner off and on. Click OK to continue.
Checking software installation - Windows If the scanner was connected to the computer before the DiMAGE Scan Utility was installed, the computer may not recognize the scanner unit. Use the following instructions to confirm the driver was installed correctly: 1. Windows 98, 2000, Me: right click on the My-computer icon. Select “properties” from the dropdown menu. Windows XP: from the start menu go to the control panel. Click on the performance and maintenance category.
Closing the scanner door The front door closes automatically when the film holder is removed. The door must be closed for the scanner to initialize. If the door does not close automatically, it can be closed manually with the supplied reset tool. Insert the tool into the hole on the side of the scanner until the latch releases the door. Do not force the tool into the scanner. The reset tool can be stored in a special clip on the front feet on the bottom of the scanner unit.
Technical specifications Scan type: Film type: Film formats: Scanning dimensions: Optical input resolution: Image sensor: A/D conversion: Color depth: Dynamic range: Light source: Focusing: Interface: Power consumption: Dimensions (W x H x D): Weight (approx.): Operating environment: Storage environment: Scan times (approx.): Test conditions: Moving film, fixed sensor, single-pass scan Negative and positive, color and monochrome Mounted and unmounted 35mm film. 24.61 x 36.
We offer support for our digital products 24 hours per day on www.minoltasupport.com. Camera know-how, image composition, digital image editing: discover more about Minolta’s new internet world and visit www.minoltaphotoworld.com © 2003 Minolta Co., Ltd. under the Berne Convention and the Universal Copyright Convention.
