Operation Manual

12 Loading the film holders

Ejecting a film holder

When the indicator lamp glows

steadily, insert the film holder

into the scanner in the direction

indicated by the arrow. Hold the

holder straight and level with the

orientation indicator up (1).

Carefully push the holder into the scanner until

the arrow mark (2) is aligned with the scanner

door; the holder will be automatically fed into the

scanner from that point. Never touch or hinder the

holder when it is in the scanner.

Loading a film holder into the scanner

Before using the scanner, install the DiMAGE Scan Utility; see the software instruction manual.

Turn on the scanner and then start the computer. Launch the DiMAGE Scan Utility before insert-

ing the film holder. Do not insert the film holder into the scanner while the utility software is

launching or the scanner is initializing; the indicator lamp blinks during this period.

Eject button

Use the eject button on the scanner body or in the DiMAGE Scan Utility win-

dow to remove the holder; the scanner automatically ejects the holder to its ini-

tial insertion position. Do not touch or hinder the holder while it is moving. If the

scanner is turned off before the holder is ejected, turn on the scanner; the hold-

er is automatically ejected.