Moov 300-Series Moov 200-Series User Manual
This manual provides information on the hardware and non-navigation features. For navigation software information, please refer to the other manual. R01 (USA) Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. Mio Technology does not warrant this document is error-free.
Table of Contents Getting to know your Mio ................................................................................................................................ 2 Moov 200-Series............................................................................................................................................ 2 Moov 300-Series............................................................................................................................................
Getting to know your Mio Moov 200-Series Name Description n Power switch Turns your Mio on and off. o Memory card slot (Select models only) Accepts a SD (Secure Digital), SDHC (Secure Digital High Capacity), or MMC (MultiMediaCard) card for accessing data such as additional maps. p Charge indicator Indicates the level of battery charge: Green - battery full Amber - battery charging. q Mini-USB connector Connects to the charger or USB cable.
Moov 300-Series Name Description n Power switch Turns your Mio on and off. o Memory card slot (Select models only) Accepts a SD (Secure Digital), SDHC (Secure Digital High Capacity), or MMC (MultiMediaCard) card for accessing data such as additional maps. p Charge indicator Indicates the level of battery charge: Green - battery full Amber - battery charging. q Mini-USB connector Connects to the charger or USB cable. r Holder socket For the holder. s Speaker Sends out sounds and voice.
Performing the initial start-up 1. For the initial start-up, slide the power switch to the ON position. Moov 200-Series 2. Moov 300-Series Your Mio turns on. Note: The battery may not be fully charged when you use your Mio for the first time. To charge the battery, see the next section. 3. Follow the prompts. During the start-up process, you can select your preferred language, read the warning message, and view the tutorial.
Charging the battery via the USB cable If you intend to charge your Mio in this way, turn off your Mio so that it takes less time to charge the battery. 1. Turn on the computer. 2. Connect the mini-USB end of the USB cable to the bottom of your Mio and the other end to a USB port on your computer. Moov 200-Series 3. Moov 300-Series The charge indicator glows amber when charging is in progress. When the battery is fully charged, the indicator turns green.
Using your Mio in a vehicle CAUTION: Select an appropriate location for mounting the Mio in a vehicle. Never place the Mio where the driver’s field of vision is blocked. Notice to all drivers: Certain states prohibit the installation of product on a vehicle’s windshield. Those that are known as of the release date of this product are listed below; however, please make sure that you are in compliance with your state’s most recent law before installing this product.
4 5 Connecting the TMC antenna (select models only) If you Mio has the TMC connector, attach the antenna to your Mio in order to receive real-time driving traffic information. CAUTION: Keep the antenna cord fairly straight (not curled or bent) for best reception. Moov 200-Series Moov 300-Series TMC information is monitored by the navigation software. Once the information is received, you can view it on your device and traffic icons will appear in the map view.
Operating basics Turning on and off For normal operation, turn off your Mio by sliding the power switch to the OFF position. Your Mio enters a suspended state. To use it again, slide the power switch to the ON position. Your Mio will be back to where you left off. Moov 200-Series Moov 300-Series Shutdown and hardware reset Occasionally, you may need to perform a hardware reset when your Mio stops responding; or appears to be “frozen” or “locked-up.
Reference Inserting a memory card CAUTION: Do not apply pressure to the centre of the memory card. Hold the card (SD, SDHC, or MMC) by the edges and gently insert it into the slot with the label facing the front of the Mio. Moov 200-Series Moov 300-Series To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot. Troubleshooting Note: If you encounter a problem you cannot solve, contact an authorized service center for assistance.
Caring for your Mio Taking good care of your Mio will ensure trouble-free operation and reduce the risk of damage to your Mio. Keep your Mio away from excessive moisture and extreme temperatures. Avoid exposing your Mio to direct sunlight or strong ultraviolet light for extended periods of time. Do not place anything on top of your Mio or drop objects on your Mio. Do not drop your Mio or subject it to severe shock.
Regulatory information Note: For regulatory identification purposes, Moov 200-Series is assigned a model number of N177 and Moov 300-Series is assigned a model name of N179. Regulations statements Federal Communications Commission (FCC) statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety precautions Prolonged listening of music in maximum volume can damage the ears. About charging Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. This product is intended to be supplied by a LISTED Power Unit marked with “LPS”, “Limited Power Source” and output rated + 5 V dc / 1.0 A”. Use a specified battery in the equipment. About the charger Do not use the charger in a high moisture environment.
200-Series, 300-Series User Manual en English
Mio Moov 200-Series, 300-Series | Important safety information Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Mio Moov 200-Series, 300-Series | Important safety information Home Charger-specific safety information To charge your Mio from the mains power, use the home charger (Model: PSAA05R-050; Input: 100-240V AC 50-60Hz; Output: 5V DC 1A Max) supplied by Mio as an accessory (may be sold separately). Using other home chargers with your Mio could result in serious injury or property damage. Never use the charger if the plug or cord are damaged. Do not expose the charger to moisture or water.
Mio Moov 200-Series, 300-Series | Contents Contents Important safety information...................................................................................................................2 Welcome................................................................................................................................................7 Important information for using the manual .......................................................................................7 How do I get started?........
Mio Moov 200-Series, 300-Series | Contents Traffic Messages.............................................................................................................................53 What can I customize?.........................................................................................................................54 Route Options.................................................................................................................................55 Route Calculation 1/4 ............
Mio Moov 200-Series, 300-Series | Contents How do I remove a voice file?.....................................................................................................96 How do I backup my Mio?...............................................................................................................97 Reference ............................................................................................................................................98 Point of Interest categories ................
Mio Moov 200-Series, 300-Series | Contents Welcome Thank you for purchasing this Mio. This manual has been prepared to guide you through the operation of your Mio from first set-up through to continuous use. Please read this manual carefully before using your Mio for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
Mio Moov 200-Series, 300-Series | How do I get started? How do I get started? Note: The first time you use your Mio, it may take up several minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD. How do I turn my Mio on for the first time? To get started for the first time, complete the following steps: 1. Read the Important Safety Information on page 3. 2.
Mio Moov 200-Series, 300-Series | Contents Mio Moov 300-Series 9
Mio Moov 200-Series, 300-Series | How do I get started? 3. Turn your Mio on Your Mio will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. 5. To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Mio (see "Language" on page 67).
Mio Moov 200-Series, 300-Series | Contents 6. View the Tutorial When you have accepted the Safety Agreement, the first Tutorial screen will display. To prevent the Tutorial from displaying again on start-up, clear the Show on start-up check box. To move forward through the Tutorial screens, tap . To view the previous screen, tap . To view the Tutorial again while using your Mio, see "Tutorial" on page 76.
Mio Moov 200-Series, 300-Series | How do I get started? How do I monitor the battery status? Your Mio has an internal battery that when fully charged, should provide power for up to 3 hours. The battery indicator light on the top of the Mio indicates the level of internal battery charge: Green - battery full Orange - battery charging You can monitor battery power status on the Power screen. To access the Power screen, tap and hold on the map screens.
Mio Moov 200-Series, 300-Series | Contents What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination and allows you to customize preferences. The Main Menu can be accessed from the map screens by tapping bottom of any screen. or by tapping the status bar at the Note: The Main Menu screens may differ from those displayed above, depending on your Mio model.
Mio Moov 200-Series, 300-Series | How do I navigate with GPS? How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satelites that orbit the Earth at around 20,200km (12,552mi). Each satelite transmits a range of signals which are utilized by GPS receivers, such as your Mio, to determine an exact location.
Mio Moov 200-Series, 300-Series | Contents How do I go from A to B? Your Mio is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, gas stations, railway stations and airports. When you ... Then ...
Mio Moov 200-Series, 300-Series | How do I go from A to B? How do I search for an address? Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for your destination by postcode or zip code. Quick Steps 1. Open the Destination Search screen 2. Select the country 3. Search for the city/area 4.
Mio Moov 200-Series, 300-Series | Contents 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display. b) Select USA from the list. The Destination Search screen will display. . 3. Search for the City/Area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
Mio Moov 200-Series, 300-Series | How do I go from A to B? Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display.
Mio Moov 200-Series, 300-Series | Contents b) Use the Keyboard screen to enter Mio Avenue as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name. c) Use the Keyboard screen to enter 118 as the house number of your destination, then tap the search result.
Mio Moov 200-Series, 300-Series | How do I go from A to B? How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from the pop-up Map menu on the 2D Map or 3D Map screen.
Mio Moov 200-Series, 300-Series | Contents a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favorites, recent destinations and POI locations. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display.
Mio Moov 200-Series, 300-Series | How do I go from A to B? 4. Search for the street name and house number a) From the Destination Search screen, tap Street Address. The Keyboard screen will display. b) Use the Keyboard screen to enter Mio Avenue as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name.
Mio Moov 200-Series, 300-Series | Contents e) Complete one or more of the following: If you want to ... Then ... add another waypoint tap Add. The Add To Trip Menu will display. return to step 1a. Note: Waypoints added after a multi-stop trip has commenced will not be included in the current route. navigate to your selected destination tap . The Preview screen will display. tap . The 3D Map screen will display the calculated route. tap a destination point to move.
Mio Moov 200-Series, 300-Series | How do I go from A to B? How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map. The Map Menu will display. 2. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint.
Mio Moov 200-Series, 300-Series | Contents How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as gas stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry wizard. Tip: You can also quickly search for certain POIs based upon your current location via the Main Menu screen.
Mio Moov 200-Series, 300-Series | How do I go from A to B? 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display. b) Select USA from the list. The Destination Search screen will display. . 3. Search for the city/area a) From the Destination Search screen, tap City/Area.
Mio Moov 200-Series, 300-Series | Contents 4. Search for a POI a) Either tap Search by name to search in all POI categories, or select a category from the list. The Keyboard screen will display. b) Use the Keyboard screen to search for Statue of Liberty as your destination, then tap the search result. The Preview screen will display. c) Complete one of the following: If you want to ... navigate to your selected destination Then ... tap . Your route is calculated and displayed on the 3D Map screen.
Mio Moov 200-Series, 300-Series | How do I save Favorites and My Home? How do I save Favorites and My Home? You can save up to 200 destinations as favorites, one of which can be saved as My Home. You can save a favorite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 43. How do I save a Favorite or My Home? 1. Search for an address until the Preview screen is displayed. 2. Tap Save.
Mio Moov 200-Series, 300-Series | Contents How do I navigate to a Favorite? 1. Tap the Favorite destination you want to travel to. The Preview screen will display. 2. . Tap Your Mio will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
Mio Moov 200-Series, 300-Series | How do I save Favorites and My Home? How do I edit the name of a Favorite? 1. From the Favorite Destinations screen, select a favorite to edit. The Favorite Preview screen will display. 2. Tap Edit. The Edit Name screen will display. 3. To edit the name of the favorite, tap 4. After you have edited the favorite name, tap The Edit Name screen will display. 5. Complete one of the following: . . If you want to ... Then ... rename the Favorite tap Save.
Mio Moov 200-Series, 300-Series | Contents How do I delete a Favorite? 1. From the Favorite Destinations screen, select a favorite to delete. The Preview screen will display. 2. Tap Delete. The favorite is deleted. The Favorite Destinations screen will display.
Mio Moov 200-Series, 300-Series | How do I navigate to a recent location? How do I navigate to a recent location? To make navigating to an address easier, your Mio will automatically save all your start locations and destinations in a list of recent locations. 1. Tap a recent location. The Preview screen will display. 2. Complete one of the following: If you want to ... Then ... calculate the route and open the 3D Map screen Tap . The 3D Map screen will display.
Mio Moov 200-Series, 300-Series | Contents How do I view my route? When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions. The Map button cycles through the 3D Map, 2D Map, Traffic Overview, Route Overview and Turn-by-Turn™ screens. 3D Map screen The 3D Map screen displays your current position and follows your direction of travel. Tap and drag the screen, to move across the map.
Mio Moov 200-Series, 300-Series | How do I view my route? Item Description Cancel route Cancels your current route. Zoom To view zoom options, tap Map Mute/unmute volume, TMC, battery, GPS and compass information. To zoom out, tap To zoom in, tap . . . The Map button allows you to cycle through different map screens. Tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator.
Mio Moov 200-Series, 300-Series | Contents 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see “Map Display” page 60). Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 48).
Mio Moov 200-Series, 300-Series | How do I view my route? Item Description Map The Map button allows you to cycle through different map screens. Mute/unmute volume, TMC, battery, GPS and compass information. Tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Mio receive traffic information?” on page 48.
Mio Moov 200-Series, 300-Series | Contents Traffic Overview screen Depending on your Mio model traffic information may not be available or may require a traffic cradle. The Traffic Overview screen displays a general overview of the traffic situation on your route, including all events in the immediate vicinity. Tap and drag the screen, to move across the map.
Mio Moov 200-Series, 300-Series | How do I view my route? Item Mute/unmute volume, TMC, battery, GPS and compass information. Description Tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Mio receive traffic information?” on page 48. Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable.
Mio Moov 200-Series, 300-Series | Contents Route Overview screen The Route Overview screen gives you a bird’s eye view of your trip. Note: A route must first have been calculated for this screen to be available. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 43). Note: Depending on the country you are traveling in, the color of the direction and distance buttons may differ from the above example.
Mio Moov 200-Series, 300-Series | How do I view my route? Item Description Cancel route Cancels your current route. Zoom To view zoom options, tap Map Mute/unmute volume, TMC, battery, GPS and compass information. To zoom out, tap To zoom in, tap . . . The Map button allows you to cycle through different map screens. Tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator.
Mio Moov 200-Series, 300-Series | Contents Turn-by-Turn screen The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available. Note: A route must first have been calculated for this screen to be available.
Mio Moov 200-Series, 300-Series | How do I view my route? Item Mute/unmute volume, TMC, battery, GPS and compass information. Description Tap to expand and see the following options: Mute/unmute volume TMC traffic status indicator. For more information, see “How does my Mio receive traffic information?” on page 48. Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable.
Mio Moov 200-Series, 300-Series | Contents How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens. Displaying the Map Menu 1. Tap 2. Tap and drag to move around the map to your selected location. 3. Tap the map. The Map Menu will display. to display the 3D Map or 2D Map screen.
Mio Moov 200-Series, 300-Series | How do I view my route? How do I avoid an area? Your Mio can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area. How do I add an Avoid Area? 1. Tap the 3D Map or 2D Map screen to display the Map Menu. 2. Select Add Avoid Area. 3.
Mio Moov 200-Series, 300-Series | Contents How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. 1. Select a departure point If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) Tap the 3D Map or 2D Map screen at your departure point.
Mio Moov 200-Series, 300-Series | How do I view my route statistics? How do I view my route statistics? Tripmeter is only available on some models. The Mio provides information on your: distance traveled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
Mio Moov 200-Series, 300-Series | Contents How do I view statistics of my trips to date? The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter was last reset. a) From the Tripmeter - Current Route screen, tap The Tripmeter - Global screen will display. b) Complete one of the following: If you want to ... Then ... view statistics for your current route tap reset the tripmeter .
Mio Moov 200-Series, 300-Series | Traffic Traffic Traffic information is only available on some models and in selected countries Your Mio can receive current traffic information for all main roads and freeways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location.
Mio Moov 200-Series, 300-Series | Contents How will I know when a Traffic Event occurs? Incoming events are handled according to your Traffic preferences. For more information, see "How do I customize Traffic preferences?" on page 63. When traveling through an area in which you can receive traffic status, your Mio will decode these events and display them on-screen. An icon will display at the event location on the map screens, and an audible warning is given if an event is on your route.
Mio Moov 200-Series, 300-Series | Traffic How do I view a list of all events on my route? Your Mio creates a list of events as they are received, which is displayed on the Event List screen. This screen can only be viewed if the TMC icon is green or orange. From the Traffic Overview screen, tap . Element Description Event description Displays details of the Event, including: Name of road and direction in which Event is taking place. Location of where Event begins and ends.
Mio Moov 200-Series, 300-Series | Contents How do I view traffic details? There are several ways to view details of an event received by your Mio. Choose one of the following: Location Option From any of the screens used to view your route From the Traffic Overview screen Tap the Event message when it appears on screen. The Event Details screen will display. . Tap The Event List screen will display. Select and tap the event you want to view. The Event Details screen will display.
Mio Moov 200-Series, 300-Series | Traffic How do I know if a detour is recommended? When a Traffic or Clearance event occurs on your route, a detour will always be recommended. The detour event message will display in the status bar on map screens. Note: Detours are only recommended for Traffic or Clearance Events on a calculated route. How do I avoid an event on my route? From the Traffic Overview screen, tap . 1. From the Event List screen, tap the event. The Event Details screen will display. 2.
Mio Moov 200-Series, 300-Series | Contents Traffic Messages The Event Details screen displays detour status information. Detour Not Available messages If a detour is not available, one of the following messages will display: Message Description This Event is not locatable A specific location for the Event cannot be identified. This clearance is not locatable This Event does not affect your route The Event is not on the current leg of your journey, or is behind your current position.
Mio Moov 200-Series, 300-Series | What can I customize? What can I customize? There are various customization options available to enhance your navigation experience. The Preferences menu screens are accessed by pressing To move forward through the Preferences screens, tap To revisit the previous screen, tap . 54 .
Mio Moov 200-Series, 300-Series | Contents Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... Then... change the route type move the Route Type slider towards Fastest time to give high priority to the fastest time when calculating a route. move the Route Type slider towards Shortest distance to give high priority to the shortest distance when calculating a route.
Mio Moov 200-Series, 300-Series | What can I customize? Road Types 2/4 Complete the following: If you want to... Then... avoid toll roads select the Toll roads check box in the Avoid column. receive a warning if your route includes toll roads select the Toll roads check box in the Warn column. The warning will display at the start of every trip containing a toll road. avoid unsealed roads select the Unsealed roads check box in the Avoid column.
Mio Moov 200-Series, 300-Series | Contents Driver Alerts 3/4 Complete the following: If you want to... Then... enable a visual warning if the Main Menu screen is accessed in a moving vehicle select the Warn me not to operate my Mio while driving check box. enable a warning chime when traveling at or above a designated speed select the Alert me when my speed exceeds check box. select your preferred speed select your preferred speed from the Speed box. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Data Recording 4/4 Complete the following: If you want to... Then... record a GPS log of your trips select the Enable GPS data logging check box. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | Contents Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... Then... change the map color scheme select your preferred scheme from the Map Scheme box. set the screen contrast to automatically adjust select the Auto day/night option.
Mio Moov 200-Series, 300-Series | What can I customize? Map Display 2/3 Complete the following: If you want to... Then... enable automatic zooming during navigation select the Auto-zoom on main map screens check box. If selected, the 3D Map screen will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. display North at the top of the 2D Map screen select the Keep North at top of 2D Map screen check box.
Mio Moov 200-Series, 300-Series | Contents Select Map 3/3 Complete the following: If you want to... Then... use maps from a different continent select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Map POIs Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools. Complete the following: If you want to... Then... display all POI icons (ie, icons from all categories) Tap Turn All On.
Mio Moov 200-Series, 300-Series | Contents Volume Complete the following: If you want to... increase or decrease the volume Then... move the Volume slider towards High to increase the volume. move the Volume slider towards Low to decrease the volume. hear a tone when you tap the touch screen select the Audio check box. hear keyboard characters spoken to you select the Speak keyboard letters check box. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Screen Display Complete the following: If you want to... change the screen brightness Then... move the Screen Brightness slider towards Bright to increase screen brightness. move the Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Mio can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are colored - therefore, use lower brightness whenever acceptable.
Mio Moov 200-Series, 300-Series | Contents GPS GPS Status 1/2 Signals are transmitted by Global Positioning System (GPS) satelites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed and the heading in degrees. The strength of each satelite is displayed on a bar chart.
Mio Moov 200-Series, 300-Series | What can I customize? Set GPS Mode 2/2 Complete the following: If you want to... Then... use GPS select the Normal option. use WAAS select the WAAS (only available in USA) option. use EGNOS select the EGNOS (only available in Europe) option. Note: WAAS - Wide Area Augmentation System is a navigation system developed for civil aviation by the Federal Aviation Administration (FAA), a division of the United States Department of Transportation (DOT).
Mio Moov 200-Series, 300-Series | Contents Language Complete the following: If you want to... Then... enable voice guidance select the Enable voice guidance check box. change the on-screen language select your preferred language from the Language box and tap Yes. change the voice scheme select your preferred voice scheme from the Voice Guidance box. Your language preference is saved and the map screen is displayed.
Mio Moov 200-Series, 300-Series | What can I customize? Traffic Traffic information is only available on some models and in selected countries You can view your current traffic system status and change options by customizing the traffic preferences. Traffic System Status OR From the Traffic Overview screen: The Tuner section displays the name and frequency of the radio station currently being used to receive traffic event information.
Mio Moov 200-Series, 300-Series | Contents Traffic Event Notification OR From the Traffic Overview screen: Complete the following: If you want to ... Then ... turn on/ off traffic event notification select the Notify me about nearby traffic events check box to receive traffic event notification. clear the Notify me about nearby traffic events check box to turn off traffic event notification. Note: Event icons will still display on the 3D and 2D Map screens.
Mio Moov 200-Series, 300-Series | What can I customize? Select event sorting type From the Traffic Overview screen: Complete one the following: If you want to ... Then ... sort events by distance select the Distance check box. sort events by road name select the Road name check box. sort events by age select the Age check box only see events that occur on your route select the Only show events on my route check box. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | Contents Start-up Complete the following: If you want to... Then... show the Tutorial when you turn on your Mio select the Show the Tutorial checkbox. show the Language Selection screen when you turn on your Mio select the Show the Language Selection screen checkbox. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Power The Battery Status bar shows the percentage of power left in the Mio battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "How do I monitor the battery status?" on page 12.
Mio Moov 200-Series, 300-Series | Contents Keyboard Complete the following: If you want to... Then... use an alphabetic keyboard for entering information select the Use alphabetic type (a, b, c...) option. use a QWERTY keyboard for entering information select the Use QWERTY type option. use a keypad-type keyboard (predictive text) when searching for an address select the Use keypad type (abc, def...) for address searches check box. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Units You can change the units used by your Mio by customizing the measurements preferences. Units 1/2 Complete the following: 1 If you want to... Then... change the time format select either the 12 hour or 24 hour option change the distance units1 select your preferred distance unit type from the Distance Units options. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | Contents Units 2/2 Complete the following: If you want to ... Then ... change the latitude, longitude position format select either the Decimal degrees or the Degrees, minutes and seconds option. Your preferences are automatically saved.
Mio Moov 200-Series, 300-Series | What can I customize? Tutorial The Tutorial displays when you turn your Mio on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, clear the Show on start-up check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap . .
Mio Moov 200-Series, 300-Series | Contents Saved Information Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations. delete favorites tap Delete Favorite Destinations. delete avoid areas tap Delete Avoid Areas. restore factory default settings tap Restore Factory Defaults. Note: The Restore Factory Defaults option does not delete recent locations or saved favorite destinations.
Mio Moov 200-Series, 300-Series | What can I customize? About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... Then... enable a shop demonstration of MioMap to be played tap Shop Demo on the preference screen. After a short delay a route demonstration will display.
Mio Moov 200-Series, 300-Series | Contents What is MioMore Desktop? Depending on your Mio model, certain MioMore Desktop features may not be available. MioMore Desktop is a suite of tools you can use to access greater functionality and product information via your computer. MioMore Desktop allows you to: obtain software updates manage maps manage safety camera subscriptions manage photos using Photo Album browse the Mio website for special offers.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? How do I install MioMore Desktop onto my computer? Note: Before you begin: Ensure that your computer meets the minimum system requirements for MioMore Desktop, especially: i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install MioMore Desktop, even if it is not your default browser. ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install MioMore Desktop. 1.
Mio Moov 200-Series, 300-Series | Contents MioMore Desktop features Depending on your Mio model, certain MioMore Desktop features may not be available. Start All Programs Mio MioMore Desktop Element Description Menu bar Menus that provide access to basic MioMore Desktop functionality. Mio online Displays the Mio website. My Maps Application used to install and manage maps. My Subscription Information on your current subscriptions, including safety camera subscription.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? How do I keep MioMore Desktop up-to-date? We recommend that you regularly use MioMore Desktop to check the Mio server for MioMore Desktop software updates. How do I update MioMore Desktop? Start All Programs Mio MioMore Desktop Tools Options General Select Auto check for updates checkbox.
Mio Moov 200-Series, 300-Series | Contents My Maps The My Map application allows you to install new maps, remove maps from your device and purchase new maps. Start All Programs Mio MioMore Desktop My Maps Element Description Zoom In Click to zoom in. Continent A drop down list of continents that have maps available for your Mio. Map Source A list of maps on the DVD or available for purchase via the Mio store website. My Mio A list of maps installed on your Mio. Zoom Out Click to zoom out.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? How do I install maps onto my Mio? Your Mio comes with one or more pre-activated maps. You can install maps from the enclosed DVDs to a memory card or your Mio internal memory; however you may need to purchase a Map Product Key to activate the maps. Which map should I install? If you are not sure which map contains the town or city that you want to install, you can use the Find City window to identify the correct map.
Mio Moov 200-Series, 300-Series | Contents 6. 7. Follow the prompts to activate your Map Product Key, including: Enter the Map Product Key when prompted. Your computer will connect to the Internet and activate your Map Product Key. When activation has completed, the map will change color to amber; continue to step 7. Click the map you want to install to your Mio. The map will change color to yellow to indicate it has been selected. To deselect a map, click the map again.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? How do I remove maps from my Mio? 1. Click My Maps. The My Maps application will display. 2. From the My Mio panel, select the check box next to the map you want to remove. 3. Click Remove Maps to remove the selected maps. 4. Confirm that you want to remove the selected map when prompted. The map is removed from your Mio.
Mio Moov 200-Series, 300-Series | Contents What is a Major Road Network map? Continuous continental navigation Navigation between particular countries is not available on all models. Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Major Road Network map covers a large area, such as North Amaerica, and contains main roads that connect cities and towns.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? Photo Album Depending on your Mio model, certain Photo Album features may not be available. Photo Album is a MioMore Desktop application which allows you to copy, delete or move pictures or albums on your computer. Start All Programs Mio MioMore Desktop Photo Album Element Description NavPix menu Gives access to Photo Album functionality. Desktop albums Displays a list of all albums stored in the NavPix library on your computer.
Mio Moov 200-Series, 300-Series | Contents Toolbar The following options are available on the toolbar: Button Description Create new album Click to create a new album in the NavPix library you are viewing. Rotate left Rotates the selected NavPix 90° to the left. Rotate right Rotates the selected NavPix 90° to the right. Transfer to your Mio or If you are viewing NavPix in the NavPix library on your computer, this will display as Transfer to your Mio.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? How do I use Photo Album? How can I view and edit pictures or albums on my computer? If you want to ... Then ... rotate a picture to left select the picture from the Album display area. click Rotate left on the toolbar. rotate a picture to right select the picture from the Album display area. click Rotate Right on the toolbar. view the picture details select the picture from the Album display area.
Mio Moov 200-Series, 300-Series | Contents What else can I do with pictures and albums on my computer? From the NavPix library on your computer, you can: add a picture to another album remove pictures from an album view and edit details of a selected picture upload pictures to Flickr™ export to disk export pictures to Google Earth™ search for pictures view all pictures in the library If you want to ... Then ...
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? Photo Album Preferences Tools Options Photo Album Complete one of the following: If you want to ... change your NavPix location on your computer Then ... click Change. The Save As dialog box will open. select a location for your NavPix library. click Save. The warning message will display and you will be prompted to confirm your action. Your NavPix library is moved to the new location.
Mio Moov 200-Series, 300-Series | Contents Image Search Depending on your Mio model, certain MioMore Desktop features may not be available. Image Search is a MioMore Desktop application powered by Flickr™ allowing you to download photos and import them to Photo Album. Start All Programs Mio MioMore Desktop Image Search How do I download NavPix from the internet? 1. In the Description field enter a search description for the image you are looking for. 2. Select one of the Sort by options. 3.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? My subscriptions Safety camera information is only available for selected countries. Your Mio contains pre-loaded safety camera information. To subscribe to current Mio safety camera information, use the enclosed DVD to install MioMore Desktop software on your computer. For the latest safety camera coverage, to subscribe to safety camera information and to see our latest offers, visit www.mio.com.
Mio Moov 200-Series, 300-Series | Contents Activate your Subscription Start All Programs Mio MioMore Desktop 1. From Available Subscriptions section, select the country for which you want to activate the safety camera. 2. Right click and select Activate my subscription. The Activation window will display. 3. Enter the subscription product key in the Product Key field. 4. Click Continue. Follow the prompts to update your subscription. Your software will update automatically.
Mio Moov 200-Series, 300-Series | What is MioMore Desktop? Voice Transfer The Voice Transfer application is part of MioMore Desktop and allows you to install or remove voice files. Voice files take up space on your Mio’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Mio if required.
Mio Moov 200-Series, 300-Series | Contents How do I backup my Mio? You can save backups of the following information, and later restore them to your Mio: Favorites and My Home Preferences, including Point of Interest and NavPix preferences Multi-stop trips Recent locations. How do I Backup my Mio? 1. Tools Backup and Restore The Backup & Restore window will open. 2. Click Create new backup. The Create new backup window will display. 3.
Mio Moov 200-Series, 300-Series | Reference Reference Point of Interest categories Icon Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Centre Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Church Cinema City Centre College or University Company Concert Hall, Music Centre, Opera Convention Centre, Exhibition Centre Courthouse Cu
Mio Moov 200-Series, 300-Series | Contents Icon Description Icon Description Police Station Post Office Railway Station Rent-a car Parking Rest Area Restaurant Area Scenic or Panoramic View School Shop Shopping Centre Stadium Swimming Pool Tennis Court Theatre Tourist Information Office Travel Agency Vehicle Equipment Provider Veterinarian Water Sports Winery Yacht Basin Zoological park (zoo) Branded Points of Interest Branded Points of Interest are available on some maps.
Mio Moov 200-Series, 300-Series | Reference Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description Danger There is a dangerous situation on the route; for example, people are on the road. Traffic Any event that will cause a delay on a route. Weather Weather conditions are adversely affecting a route; for example, there is ice on the road.
Mio Moov 200-Series, 300-Series | Contents Safety Camera POIs Mio products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Mio does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Mio does not condone speeding or any other failure to comply with your local traffic laws.
Mio Moov 200-Series, 300-Series | Reference Copyright © 2008 MiTAC International Corporation. Mio is either a registered trademark or trademark of MiTAC International Corporation and is used under license by Mio Technology Limited. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law.
Mio Moov 200-Series, 300-Series | Contents For more information Online support For 24/7 help and support with Mio products, visit our Technical Support website at: www.mio.com Mio Club You can register your Mio with the Mio Club - a section of our website dedicated exclusively to owners of Mio navigation products: www.mio.
DOC-38-D
