User Manual

LASER
Usage Examples: Triggers your camera or flash unit once the
laser beam is broken to take water drops, wildlife photos etc
Camera Setup: Manual Focus, Fixed Exposure Time
• Set the threshold value to a high
level such as 990 and align the laser
beam with the receiver. When the
laser beam hits the receiver you will
see LM sign on top of the LCD screen.
• If you don’t see the LM sign, either
the laser beam is off the receiver or it is no strong enough. In
such a case, align the laser beam with the receiver and if this
does not help decrease the threshold value.
• Adjust the delay between 0 and 999 ms per your needs.
This is the delay between Nerotrigger detects that the laser
beam is broken and triggers the flash unit.
•Adjust the frame parameter which determines the number
of photos to be taken each time the laser beam is broken
• Press the Start button. Nerotrigger will count down for 3
seconds, go to Economy Mode for battery saving and start to
operate.