User Manual
DIY (Do It Yourself)
Usage Examples: Triggers your camera by receiving any type
of external signal as a triggering event.
Camera Setup: Manual Focus, Fixed Exposure Time
• Adjust the threshold between 1 and
999 per your needs. 999 corresponds
to “3V” where 1 corresponds to “0V”
• Adjust the delay between 0 and 999
ms per your needs. This is the delay
between Nerotrigger detects the
signal level change and triggers the camera.
• Adjust the mode parameter which determines which type
of change will be considered as a triggering event. It has
three different options: Rising, Falling, and Change. If you set
it to Rising, the camera will be triggered only if the signal is
changed in a rising manner. Similarly, Falling mode will
consider only a falling signal as a triggering event. The third
option Change, accepts both of the changes, rising and
falling as triggering events.
P.S.: Please refer to Appendix A prior to use DIY mode.