User Manual

(High Dynamic Range) and DIY (Do It Yourself). All of the
modes can be fine-tuned to fit your needs.
The interchangeable camera connection cable is also
another standard feature of Nerotrigger. You can also use
the flash unit triggering port to trigger your flash. The
external input source port is used in DIY mode.
First Use
Nerotrigger operates with two AAA Batteries. Take the
batteries from the box. Open the battery cover of
Nerotrigger and put in the batteries. Please make sure you
are putting them with the correct polarity. You can see the
polarity signs on the board of Nerotrigger. Use only 1.5 V
AAA alkaline batteries. Rechargeable batteries are not
supported by Nerotrigger. After you put the batteries in,
close the battery cover. Turn the power switch on and
Nerotrigger will start working.