Owner manual

(Figure 6) (Figure 7)
True Diversity ReceiversTrue Diversity Receivers
10
11
! The rack mountable kits are pre-drilled with 4 opening holes to be fitted on an EIA
standard 19-inch rack case. (Figure 6)
! For ideal reception and performance, install the receiver at least 1 meter (3 feet)
above the ground and away from EMI / RFI “noise” sources. In addition, place the
transmitter microphone at least 1 meter (3 feet) away from the receiving antenna, as
shown. (Figure 7)
Receiver Rack-Mount Kits
FB-71 FB-72
Mounts 1 half-rack in
a single rack space
Mounts 2 half-racks in
a single rack space
! Please note the main disconnected
device is the AC Inlet
! The screw size for rack mounted
function is as below：
Total 4 screws provided
10.00mm
M4xP0.7mm
! L-Shaped steel bracket size for
rack mounted function:
RECEIVER VFD INTERFACE
Displays all Parameters
Display Panel and Buttons
5 4
14
13
3 2 8 11 1 7
12
10
9
6
Working Frequency
4
Battery Meter
8
PC Address (can be programmed)
10
Audio Signal Meter
2
Interference Indicator (lit denotes presence of interference)
6
Channel (can be programmed)
1
Lock Icon (can be turned on or off)
13
RF Signal Meter
5
Squelch Meter (levels can be programmed)
9
Group (can be programmed)
11
Diversity A/B Antenna
3
Frequency (can be programmed)
7
Name (can be programmed)
12
Setting Cursor
14