Installation Guide

Product Offerings
Why should my stone, tile and grout be sealed?
You have made a big investment and should not stop with just
the installation of it. By sealing your stone, tile or grout you’re
providing a barrier against staining agents becoming
permanently imbedded. Properly sealed surfaces will last
longer, resist stains, be less slippery and be easier to clean
and maintain.
What Miracle products should I use for a
new installation?
A. Miracle 511 Sealer of choice for grout release.
B. Miracle Grout Shield New & Improved as a grout additive
to protect grout.
C. Miracle cleaners for grout clean-up.
D. Miracle 511 Sealer for final sealing of tile, stone or grout.
E. Miracle products for on-going maintenance.
Are 511 products toxic?
Although 511 Impregnator is a solvent, it is only a 1 on the
toxicity level (0 - 4). That is equal to laundry detergent. It is
non-flammable and is OK for use in food prep areas.
All 511 Products have been tested by Scientific
Certification Systems and has passed the stringent
California Air Resources Board (CARB) Section 01350 test
requirements making it certified for Indoor Advantage Gold
(SCS-IAQ-01615).
What is the general cost for 511 sealants?
$.03 - $.48 per square foot depending on product used and
surface applied to.
How frequently should I reapply?
The products longevity will vary depending on the surface
texture, type of stone, tile or grout, where it is located, what
type of wear the surface is exposed to, etc. Typically, we
recommend re-application on flooring every 1 - 3 years for
commercial flooring and every 3 - 10 years for residential
flooring. We recommend reapplication every 1 - 20 years on
counters and every 3 - 20 years on vertical surfaces.
Is there a warranty with each specific product?
20 Year Satisfaction Guaranteed - 511 Impregnator,
511 Porous Plus and 511 Seal & Enhance.
• 10 Year Satisfaction Guaranteed 511 H20 Plus.
• Lifetime Warranty - Miracle Grout Shield New & Improved.
Questions
Tips/Questions
37
38
Use Only Products Designed to be
Used on Natural Stone, Ceramic/
Porcelain Tile & Grout
Avoid using general cleaners not specifically designed for
natural stone, ceramic/porcelain tile or grout. Some of these
general cleaners (i.e. off the shelf bathroom, tile and grout
cleaners) may contain harmful chemicals that may damage
natural stone as stone is sensitive to certain chemicals.
Miracle Sealants Cleaners are specifically designed for
cleaning Natural Stone, Ceramic/Porcelain Tile and Grout.
(See product recommendation chart for appropriate
products for your particular substrate).
Different Stains Require
Different Cleaners
For general cleaning daily (or as needed) Miracle Sealants
Cleaners can be used as directed on any type of natural
stone, ceramic/ porcelain tile or grout. Refer to product
recommendation chart for appropriate products to be used
on specific surfaces.
For soap scum, hard water build up, efflorescence or heavy
dirt buildup Miracle Sealants Heavy-Duty Acidic Cleaner can
be used as directed. This type of cleaner should NOT be
used on acid sensitive natural stones (polished marble,
limestone or travertine). For acid sensitive stone use Miracle
Heavy Duty Cleaner (Acid Substitute).Refer to the product
recommendation chart for appropriate products to be used
on specific surfaces. For porcelain and ceramic tile, you
can also use Porcelain & Ceramic Tile Cleaner, Tile & Stone
Cleaner or Heavy Duty Cleaner (Acid Substitute) to clean
soap scum.
Before Resealing “Clean It!”
When the time comes to re-seal your natural stone,
ceramic/porcelain tile & grout, be sure that it is sufficiently
cleaned. Refer to product recommendation chart for
appropriate products to be used on specific surfaces.
For additional cleaning tips and general
information go to miraclesealants.com
Tips