Use and Care Manual

STEP 2
：
STEP 1
：
1. Screw Hang Bolts (1) into Headboard (A).Make sure there is enough
length of the Hang Bolts (1) for next step as show in Figure 1.
2. Insert Hang Bolts (1) through the hole of Bed Rails (C) as shown in Figure 2.
3. Attach Bed Rail (C) to Headboard (A) using Crescent Spacer (2), and Nut (4).
tighten with Wrench(5) as show in Figure 3. Don't tight Nut (4) fully.
4. Repeat the steps 1,2,& 3 for Footboard (2).
5. When Headboard (A), Footboard (B) and Bolt Rails (C) fixed, please fully tighten all Nuts (4).
1. Attach Backboard (D) to Headboard (A) and Footboard (B) by using 4 pieces of Bolts (6), 4 pieces of
Flat washer (7),and 4 pieces of Spring Washers (3) as shown.
2. Use Allen Wrench (8) to tighten all Bolts (6) clockwise as shown.
A
Figure 1
Figure 2
Figure 3
A
B
C
C
1
1
1
2
4
5
A
B
C
D
7
6
8
1 *8 pcs
2
* 8 pcs
5
*1pcs
4
* 8 pcs
6 *4 pcs
7
3
* 4 pcs
* 4 pcs
8
* 1 pc
3