Installation Manual

MISHIMOTO | 18 BOULDEN CIRCLE, NEW CASTLE, DE 19720 | P 1.877.GOMISHI | WWW.MISHIMOTO.COM

28. Transfer the upper mounting clips from the factory radiator

to the new Mishimoto radiator.

29. Position the Mishimoto radiator within the engine bay.

30. Reattach the upper and lower radiator hoses.

31. Using two bolts, reinstall the upper fan shroud to the

radiator. (2x 8mm bolts)

32. Using two bolts, reattach the upper fan shroud to the lower

fan shroud. (2x 8mm bolts)

33. Reattach the battery lead, vacuum line and coolant overﬂ ow

line and reinstall the upper gasket to the radiator. (3x pop-clips)

34. Reinstall the A/C condenser to the radiator, using two

8mm bolts.

35. Reinstall the transmission cooler and cooler lines to the

radiator using two 8mm bolts.

36. Reattach the power steering reservoir to the fan shroud

using two 8mm bolts.

37. Reinstall the side gaskets on the radiator using four pop

clips. Then reconnect the hood release cable to its bracket.

38. Reconnect the coolant reservoir hose.

39. Reattach the radiator to the radiator support using four

10mm bolts.

CONTINUED ON FOLLOWING PAGE

'08

—

'10 FORD 6.4L POWERSTROKE

ALUMINUM RADIATOR

INSTALLATION GUIDE