Assembly Instruction

CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel

before beginning installation.

Care and Cleaning

To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean

water, never a solvent)to wipe the surface of the fixture.

To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit

breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean

cloth(use clean water, never a solvent) to wipe the interior surface of the fixture

Do not use any cleaners with chemical, solvents or harsh abrasives. Use Only a dry soft cloth

to dust or wipe carefully.

Estimated Assembly Time:30 minutes

Part List and Hardware List

Assembly Instruction

PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

Mounting Plate

Canopy

Chain

Mounting Screw

Bulb

Short Roped Tube

Wire Nut

Hanging Loop

Canopy Nut

Finial

Closable link/ cap

Socket Assembly

Shade

Long Roped Tube

1/3

PAGE 1
Assembly Instruction CAUTION: Read instruction carefully and turn electricity off at main circuit breaker panel before beginning installation. Care and Cleaning To clean the outside of the fixture, use a dry or slightly dampened clean cloth(use clean water, never a solvent)to wipe the surface of the fixture. To clear the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box.
PAGE 2
Installation Step 1 Unpack all parts from cartons carefully. Insert one end threaded portion of the Long Roped Tube(G) into the tube underneath the Socket Assembly (F). Screw the Chain(E) to the Hanging Loop(C) of the Metal Plate(B) and the Loop of the Socket Assembly (F) with Closable Link (EI) as diagram.
PAGE 3
Step 4 Wire connection Connect,Hot,Black or Red outlet Supply Wire to: Connect,Neutral,White Outlet Supply Wire to: Black *Parallel Cord(round&smooth) Clear,Brown,Gold or Black without Tracer(colored stripes) Insulated Wire(not green)with copper metal conductor White *Parallel Cord(square&ridged) Clear,Brwn,Gold or Black without Tracer(colored stripes) Insulated Wire(not green)with Silver metal conductor *Note: When parallel wire(SPTI&SPTII)is used.