Assembly Instruction

Step 4 Wire connection

*Note: When parallel wire(SPTI&SPTII)is used. The neutral wire is square shaped and

ridged and the hot wire will be round in shape and smooth.(See illustration on left)

Grounding Instructions:

a) For installation in the United States: Wrap ground wire from outlet box around green

ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If

fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.

b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire

around green grounding screw on mounting bracket. Tighten ground screw.

Step 5

Fix the Mounting Plate(A) to the junction box

with Mounting Screw (L).

Attach the Canopy(B) to the junction box and fix it

by turning the Canopy Nut (L) clockwise.

Insert the bulb (M) into the Socket.

PLEASUE USE ON/OFF TYPE"B" BULB MAX 40-WATT

OR CFL BULB MAX 9-WATT

THERE ARE 3PCS 25-WATT TYPE"B" BULBS IN THE BOX.

Step 6

Consult a qualified electrician to ensure correct branch

circuit conductor

ENJOY YOUR LAMP

Clear,Brown,Gold or Black without Tracer(colored stripes)

Clear,Brwn,Gold or Black without Tracer(colored stripes)

Insulated Wire(not green)with copper metal conductor

Insulated Wire(not green)with Silver metal conductor

Black

White

*Parallel Cord(round&smooth)

*Parallel Cord(square&ridged)

Connect,Hot,Black or Red outlet Supply Wire to:

Connect,Neutral,White Outlet Supply Wire to:

3/3