Laptop User Manual

7521

Plus / N N/B MAINTENANCE

2.2.7 SO-DIMM

Disassembly

1. Remove the keyboard to access the SO-DIMM sockets. (See section 2.2.6 Disassembly.)

2. Pull the retaining clips outwards (n) and remove the SO-DIMM (o). (figure 2-15)

Figure 2-15

Reassembly

1. To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part

and firmly insert the SO-DIMM into the socket at 20-degree angle. Then push down until the

retaining clips lock the SO-DIMM into position.

2. Replace the keyboard and the Easy Start panel. (See section 2.2.6 Reassembly.)