Troubleshooting guide

397
Older Hardware and Software
Configuring a Windows 2000 DHCP Server (prior to
Release 7.0)
You can modify a Windows 2000 DHCP server to support IP Phones. A
DHCP server must be configured for each subnet. The following items
must be configured:
• TFTP Server IP address
• IP address of the RTC card
• Mitel tag “MITEL IP PHONE”
To modify a Windows 2000 DHCP Server:
1. In the Start menu, point to Programs, then Administrative Tools,
and click DHCP.
2. Highlight the Server name and point to Action, then click Set
Predefined Options.
3. In the Predefined Options and Values window, click Add.
4. In the Option Type window, set the following:
-Name: IP phone TFTP Server IP Address
-Type: IP Address
- Code: 128. Then click OK.
-Value: enter the IP address of the TFTP server (the controller RTC)
then click OK.
5. In the Predefined Options and Values window, click Add again.
6. In the Option Type window, set the following:
-Name: RTC IP Address
-Type: IP Address
- Code: 129. Then click OK.
-Value: enter the IP Address of the RTC card. Click OK.
7. In the Predefined Options and Values window click Add again.
8. In the Option Type window, set the following:
-Name: Mitel Vendor String
-Type: String
- Code: 130. Then click OK.