CM11WD-
Air conditioning is an ideal way of controlling the temperature, movement and cleanliness of air inside any building, large or small. With today's buildings being so well insulated and increasingly full of electronic equipment, the need for effective climate control is greater than ever. Not only does it cool in the summer months, but air conditioning can also heat, doing away with the need for separate heating systems altogether.
V RF system Our answer to VRF Mitsubishi Electric sets the boundaries of VRF technology with the CITY MULTI range, which is available using R410A refrigerant with zero ODP (Ozone Depletion Potential). The range has been specifically designed for today’s building requirements and addresses key market issues such as energy efficiency, adaptability and reliability.
I nverter Driven Compressor Technology - now up to 50HP Low Starting Currents Using inverter driven technology saves energy for several reasons: The compressor varies its speed to match the indoor cooling or heating demand and therefore only consumes the energy that is required. When an inverter driven system is operating at partial load, the energy efficiency of the system is significantly higher than that of a standard fixed speed, non inverter system.
I ntelligent Power Module (IPM) Technology The YJM-A range from Mitsubishi Electric provides precise control of energy input, through utilization of its Intelligent Power Module (IPM) technology. By employing this technology it is possible to closely match the building requirements, achieving more accurate control of the occupied space. By using incremental 1Hz steps of capacity control, the amount of power input required is significantly reduced, resulting in greatly improved COP’s.
E fficient R410A refrigerant History of refrigerant R22, an HCFC-based refrigerant, has been a popular choice for most chillers. R22 has been targeted by the Montreal Protocol to be phased out in new equipment. Additionally, governments in many countries are enforcing a ban of HCFC-based refrigerants for new installations. Because of these restrictions, R410A refrigerants are desirable. R410A is a blend of HFCs, which do not deplete the ozone.
U nique technology Unique to Mitsubishi Electric, our heat recovery technology uses just two pipes, as opposed to the market conventional three. Designed for effective simultaneous heating and cooling our R2 and WR2 systems offer substantial savings on installation and annual running costs. Why Heat Recovery? Flexibility and efficiency are key factors when selecting a heat recovery system.
T he world’s first and the only “2-pipe” system How does the R2/WR2 Heat Recovery System operate on 2 Pipe’s? The secret of CITY MULTI heat recovery systems lies in the BC Controller “2-pipe” system provides Better Efficiency and Performance The BC Controller houses a liquid/gas separator, allowing the outdoor unit to deliver a mixture (2 phase) of hot gas for heating and liquid for cooling, all through the same pipe. Three pipe systems allocate a pipe to each of these phases.
E nergy Saving Technology What is Water-Cooled? >A unique offering from Mitsubishi Electric It is possible now to combine the features of VRF with a water circuit using CITY MULTI WR2/WY. In this case the heat is rejected to a water source rather than to the outside air. The advantages of water cooled systems are that the water can be delivered at optimised temperatures and volumes, which allows even greater flexibility and increased COP.
The importance of control The need for control is paramount in order to optimise the performance of any air conditioning system and minimize its running costs. Mitsubishi Electric offers a wide range of control options designed to meet such needs. Operating an air conditioning system without the right control can prove costly. It's therefore important to ensure that every system is correctly specified to the degree of control it requires.
Integrated Communications Control with Mitsubishi's Unique Transmission Network (M-NET) System Controller MITSUBISHI ELECTRIC's Air-conditioner Network System (MELANS) leads air conditioner management a PC browser and Network era. MELANS Use of our MELANS products enhances EFFICIENCY and QUALITY of air-conditioning, contributing to ENERGY SAVING and reduction in running cost.
Individual Remote Controller Wired MA remote controller PAR-30MAA NEW Wired MA remote controller PAR-21MAA • Backlit LCD (Liquid Crystal Display) Large, easy-to-see display Full-dot LCD display with large characters for easy viewing Contrast also adjustable • Auto Return Function to return the set temperature to the originally preset temperature after certain amount of time Auto return can be set respectively for cooling operation and for heating operation.
Individual Remote Controller Wired ME remote controller PAR-F27MEA Wireless remote controller PAR-FL32MA / PAR-FA32MA • This remote control requires non-polar wiring to only one indoor unit. • Group operation over multiple outdoor units is possible. Grouping can be changed without re-wiring, which makes dividing rooms for tenants easier. • Timer operation *Daily timer operation of one ON/OFF setting everyday *Auto-off timer : 0:30, 1:00, 1:30, 2:00...4:00 *The setting is kept in nonvolatile memory.
Advanced Touch Controller With our new Advanced Touch Controller AT-50A, easy and simple operation on the touch panel offers an optimal air environment for individual unit. Touch controller AT-50A NEW New Functions System structure M-NET M-NET M-NET adapter AT-50A Power supply unit PAC-SC51KUA-J Three in One Night setback function %""%, $ ) ' )*' ( ' $) ' ) $)% / %$)'%" *& )% $ %%' *$ )( '%# %$ "% ) %$ / , !".
Centralized Remote Controller One system controller can control up to fifty indoor units from one location. The PAC-SF44SRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). System remote controller PAC-SF44SRA Mitsubishi Electric controllers are complimented by a weekly programmable timer, being able to control up to fifty indoor units. The PAC-YT34STA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output).
Centralized Remote Controller Just press a switch to start. All of the units can be On/Off by pressing the main switch, and each unit in the group can be On/Off with individual switch. The PAC-YT40ANRA also has hardwired connection available (On/Off input, fire alarm input, run output, fault output). ON/OFF remote controller PAC-YT40ANRA Group remote controller PAC-SC30GRA DESCRIPTION FUNCTION UNITS Up to 8 groups can be operated (maximum of 16 units).
Centralized Remote Controller With a new colored touch panel, and continuation of all the G-50A functions, AG-150A visualizes its functions from basic control to advanced operations and bringing an ultimate controller to reality. Centralized controller AG-150A New Design System structure M-NET Switching Hub M-NET adapter LAN (100BASE-TX) M-NET Remote Monitoring PC A Control New Functions Backlight color liquid crystal Controllable units/groups Backlight makes it easy to see and control units.
Centralized Remote Controller Centralized controller GB-50ADA-J* *GB-50ADA-J is indicated as GB-50ADA. New The Web Server Function enables Remote Operation or Scheduling Via a Web Browser on a Personal Computer! Up to 50 indoor units can be controlled! Web Browser Enables monitoring and operation of indoor units using a PC with Microsoft® Internet Explorer (Ver.6 or 7 or 8) (Web browser function is an optional and needs license registration.
Centralized Remote Controller DIDO Controller PAC-YG66DCA Integrated centralized control software TG-2000A No more PLCs are needed! Our new DIDO controller makes it possible to control general-purpose equipment without PLC, which is cost saving. Up to 6 general-purpose equipment can be connected to the DIDO controller. *24 VDC power needs to be provided on site. Dimension: 200(W) x 120(H) x 45(D) mm : 7-7/8(W) x 4-3/4(H) x 1-13/16(D) in.
LONWORKS (LMAP02) BACnet® (BAC-HD150) CITY MULTI can easily combine into a Building Management System (BMS) via the LONWORKS and M-NET adapter LMAP02. LONWORKS is an opened transmission protocol widely used at BMS, and related equipment control. CITY MULTI is therefore compatible with large-scaled BMS management via LONWORKS . CITY MULTI can easily combine into a Building Management System (BMS) via the BACnet® and M-NET adapter BAC-HD150.
Wide selection of indoor units Ceiling cassette (4-way air flow) Page41 - Page42 Fresh Air Intake Page55 - Page56 PLFY-P VBM-E PLFY-P VCM-E Model P20 P25 P32 P40 P50 Capacity 2.2kW 2.8kW 3.6kW 4.5kW 5.6kW PEFY-P VMH-E-F Model P63 P80 P100 P125 Model P80 P140 P200 P250 Capacity 7.1kW 9.0kW 11.2kW 14.0kW Capacity 9.0kW 16.0kW 22.4kW 28.
INDOOR UNIT Ceiling cassette type 4-way airflow PLFY-P VBM-E PLFY-P VCM-E Specifications Power source PLFY-P VBM PLFY-P VCM The new 4-way cassette VBM offers 72 different airflow patterns, making it ideal for applications with ceilings up to 4.2 m (13-13/16ft) in height. Compact body to match with 2 feets (600mm) x 2 feets (600mm) ceiling design (VCM) 570mm *1 Cooling capacity *1 *1 Heating capacity *1 Cooling Power Heating consumption Cooling Current Heating External finish Unit (Munsell No.
INDOOR UNIT Ceiling cassette type 2-way airflow PLFY-P VLMD-E Specifications PLFY-P20VLMD-E *1 kW Cooling capacity *1 BTU/h *1 kW Heating capacity *1 BTU/h Power Cooling kW consumption Heating kW Cooling A Current Heating A External finish Unit (Munsell No.) Panel Dimension Unit mm (in.) HxWxD Panel mm (in.) Unit kg(lbs.) Net weight Panel kg(lbs.) Heat exchanger Type x Quantity Slim body of 290mm(11-7/16in.) height Fan Motor Slim body - only 290mm(11-7/16in.
INDOOR UNIT Ceiling cassette type 1-way airflow PMFY-P VBM-E Specifications PMFY-P20VBM-E Power source kW *1 Cooling capacity *1 BTU/h kW *1 Heating capacity *1 BTU/h Power Cooling kW consumption Heating kW Cooling A Current Heating A External finish (Munsell No.) Dimension Unit mm(in.) H W D Panel mm(in.) Unit kg(lbs.) Net weight Panel kg(lbs.) Heat exchanger Type *2 m3/min Airflow rate Fan L/s (Lo-Mid2-Mid1-Hi) cfm External staticpressure Pa Type Motor Output kW Air filter Refrigerant Gas(Flare) mm(in.
INDOOR UNIT Ceiling concealed type Specifications PEFY-P20VMR-E-L PEFY-P VMR-E-L/R Power source Static Pressure Width Heating capacity 5Pa 640mm 25-6/32in. Ultra Low Noise Cooling capacity Piping connection L model R model Power consumption Current Problem solver for residential hotels, museums, libraries, or hospitals where low noise is especially a must! Key Card Switch Cooling Heating Cooling Heating kW BTU/h kW BTU/h kW kW A A 2.2 7,500 2.5 8,500 0.06 / 0.06 0.06 / 0.06 0.29 / 0.29 0.
INDOOR UNIT Ceiling concealed type Specifications PEFY-P15VMS1(L)-E PEFY-P VMS1(L)-E Static Pressure Height 5~50Pa 200mm Power source Width Low Noise 7-28/32in. 790mm 31-1/8in. Width kW *1 Cooling capacity *1 BTU/h kW *1 Heating capacity *1 BTU/h Power *3 Cooling kW consumption Heating kW A Cooling Current *3 Heating A External finish Dimension mm HxWxD In. Net weight *3 kg(lbs.
INDOOR UNIT Ceiling Concealed Type Specifications PEFY-P20VMA(L)-E Slim Body 35~150Pa Height 250mm With precise control of indoor temperature while operating with optimum energy usage, it offers a high-energy saving efficiency. mm in. Net weight kg(lbs) Heat exchanger Type x Quantity m3/min Airflow rate L/s Fan (Low-Mid-High) cfm External static Pa pressure *4 Dimension H x W x D Air Inlet (1) Rear inlet kW BTU/h kW BTU/h kW kW A A (2) Bottom inlet Motor Air inlet Type Output kW 2.2 7,500 2.
INDOOR UNIT Ceiling concealed type PEFY-P VMH(S)-E Specifications PEFY-P40VMH-E New Power source Cooling capacity Heating capacity High Static Pressure Power consumption Increased design flexibility from sufficient external static pressure allows authentic duct air- conditioning with an elegant interior layout. Current *1 *1 *1 *1 Cooling Heating Cooling Heating kW BTU/h kW BTU/h kW kW A A External finish mm in. kg(lbs.
INDOOR UNIT Fresh Air Intake Type Specifications Power source PEFY-P VMH-E-F *1 *1 *1 Heating capacity *1 Cooling Power consumption Heating Cooling Current Heating External finish Dimension HxWxD Net weight Heat exchanger Type x Quautity Cooling capacity Fresh Air Intake Fresh Air can be taken in with temperature control. Ideal for Offices, Stores and Restaurants.
INDOOR UNIT Ceiling suspended type Specifications PCFY-P40VKM-E Power source PCFY-P VKM-E *1 *1 *1 *1 kW BTU/h kW Heating capacity BTU/h kW Cooling Power kW consumption Heating A Cooling Current A Heating External finish(Munsell No.) mm Dimension H x W x D in. kg(lbs.) Net weight Heat exchanger Type x Quantity *2 m3/min Airflow rate L/s Fan (Lo-Mid2-Mid1-Hi) cfm External static pressure Pa Type Motor Output kW Air filter Gas mm(in.) (Flare) Refrigerant pipe diameter Liquid mm(in.
INDOOR UNIT Wall mounted type Specifications PKFY-P VBM PKFY-P VBM-E PKFY-P VHM-E PKFY-P VKM-E PKFY-P VHM *1 *1 *1 *1 kW BTU/h kW Heating capacity BTU/h kW Cooling *4 Power kW consumption Heating A Cooling *4 Current A Heating External finish(Munsell No.) mm(in.) Dimension H x W x D kg(lbs.) Net weight Heat exchanger Type x Quantity *2 m3/min Airflow rate L/s Fan (Lo-Mid2-Mid1-Hi) cfm External static pressure Pa Type Motor Output kW Air filter Gas mm(in.) (Flare) Refrigerant pipe diameter Liquid mm(in.
INDOOR UNIT Floor standing exposed Specifications PFFY-P20VKM-E Power source PFFY-P VKM-E *1 *1 *1 Heating capacity *1 Cooling Power Heating consumption Cooling Current Heating External finish Dimension HxWxD Net weight Heat exchanger Type x Quantity Airflow rate (Lo-Mid-Hi-SHi) Fan Eaternal static pressure Type Motor Output Air filter Gas(Flare) Refrigerant pipe diameter Liquid(Flare) Field drain pipe diameter Sound pressure level (Lo-Mid-Hi-SHi) *2 Cooling capacity PFFY-P VKM-E For living rooms, bed
INDOOR UNIT Floor standing exposed Specifications PFFY-P20VLEM-E Power source PFFY-P VLEM-E *1 *1 *1 Heating capacity *1 Cooling Power consumption Heating Cooling Current Heating kW BTU/h kW BTU/h kW kW A A External finish(Munsell No.) mm Dimension H x W x D in. kg(lbs.) Net weight Heat exchanger Type x Quantity m3/min Airflow rate L/s Fan *2 (Lo-Hi) cfm Pa External static pressure Type Motor kW Output Air filter Cooling capacity Floor mounted lowboy type effective in perimeter zone. Gas mm(in.
INDOOR UNIT Floor mounted concealed type Specifications PFFY-P20VLRM-E PFFY-P25VLRM-E PFFY-P32VLRM-E PFFY-P40VLRM-E PFFY-P50VLRM-E PFFY-P63VLRM-E 1-phase 220-240V 50Hz / 1-phase 208-230V 60Hz 2.8 3.6 4.5 5.6 7.1 9,600 12,300 15,400 19,100 24,200 3.2 4.0 5.0 6.3 8.0 10,900 13,600 17,100 21,500 27,300 0.04 / 0.06 0.06 / 0.07 0.065 / 0.075 0.085 / 0.09 0.1 / 0.11 0.04 / 0.06 0.06 / 0.07 0.065 / 0.075 0.085 / 0.09 0.1 / 0.11 0.19 / 0.25 0.29 / 0.30 0.32 / 0.33 0.40 / 0.41 0.46 / 0.47 0.19 / 0.25 0.29 / 0.
BC CONTROLLER Specifications CMB-P108V-GA1 8 Model name Number of branch Power source CMB-P-V-G1 CMB-P-V-GA1 CMB-P-V-HA1 CMB-P-V-GB1 CMB-P-V-HB1 CMB-P1010V-GA1 CMB-P1013V-GA1 CMB-P1016V-GA1 CMB-P1016V-HA1 10 13 16 1-phase 220/230/240V 50Hz/60Hz 0.127/0.144/0.161 0.156/0.177/0.198 0.201/0.228/0.255 0.246/0.279/0.312 0.060/0.068/0.076 0.075/0.085/0.095 0.097/0.110/0.123 0.119/0.135/0.151 0.102/0.115/0.127 0.126/0.141/0.156 0.162/0.182/0.201 0.198/0.222/0.246 0.048/0.054/0.060 0.060/0.068/0.075 0.078/0.
RX5 SERIES The Ventilation System for Enhanced Air Quality - Lossnay LOSSNAY Technology Combine with Lossnay Ventilation System Enhanced Air Quality. Unified Control System Allows Greater Design Freedom. • Two paths ventilation LOSSNAY simultaneously intakes Fresh Air and exhausts Dirty Air. • Total energy recover LOSSNAY returns BOTH sensible heat and latent heat. A. Two paths ventilation 4°C (39.
Why LOSSNAY is necessary. Extra Low Mode Additional energy conservation by using a four-level air volume system that allows more precise control. • Without ventilation... Lack of Ventilation makes people sick by dirty indoor air including CO2, Dust, Bacteria. • If just opening windows...
Model line up New function: "By-pass" Ventilation External Control Setting In addition to the automatic damper open/close function, open/close control via external devices is now possible, delivering a “By-pass” ventilation system that is suitable to the installed environment.
LGH-15~100RX5-E LGH-15~100RX5-E LGH-50RX5-E LGH-150/200RX5-E LGH-100RX5-E LGH-50RX5-E Model Frequency / Power source LGH-100RX5-E Model 50Hz / Single phase 220-240V LOSSNAY ventilation Ventilation mode Fan speed Frequency / Power source By-pass ventilation 50Hz / Single phase 220-240V LOSSNAY ventilation Ventilation mode Fan speed By-pass ventilation Extra High High Low Extra Low Extra High High Low Extra Low Extra High High Low Extra Low Extra High High Current (A) 1.2-1.
VL-100U-E Control Heat Recovery Ventilators for Residential Use The New Remote Controller PZ-60DR-E enable simple control setting Time Spent in Comfort with a Breath of Fresh Air Interlocked with Air conditioners LOSSNAY independent Interlocked with City Multi Interlocked with Mr.Slim M-NET transmission line City Multi Energy Saving Slim-LOSSNAY connection cable LOSSNAY RX5 Mr.Slim LOSSNAY RX5 (Max 15 unit) Super sound insulation and quiet operation.
OA Processing Units RDH3 Series RD3 Series Ideal Indoor-Air Quality — For Your Comfort and Health A Total Air Conditioning Package Manifesting Remarkable Power The OA (outdoor-air) Processing Unit creates an optimum indoor-air environment at an unparalleled rate of cost efficiency providing substantial energy savings.
