Instruction manual

4.1 Parameter List
PARAMETERS
57
4 PARAMETER
4.1 Parameter List
Func-
tion
Parameter
Number
Name Setting Range
Minimum
Setting
Increments
Factory Setting
〈
EC Version
〉
Refer
To
Page:
0 Torque boost (Note 1) 0 to 30% 0.1%
6%/4%/3%/2%
(Note 9)
63
1 Maximum frequency 0 to 120Hz 0.01Hz 120Hz 64
2 Minimum frequency 0 to 120Hz 0.01Hz 0Hz 64
3 Base frequency 0 to 400Hz 0.01Hz 60Hz
〈
50Hz
〉
65
4 Multi-speed setting (high speed) 0 to 400Hz 0.01Hz 60Hz 66
5 Multi-speed setting (middle speed) 0 to 400Hz 0.01Hz 30Hz 66
6 Multi-speed setting (low speed) 0 to 400Hz 0.01Hz 10Hz 66
7 Acceleration time
0 to 3600 s/
0 to 360 s
0.1 s/
0.01 s
5 s/15 s
(Note 6)
67
8 Deceleration time
0 to 3600 s/
0 to 360 s
0.1 s/
0.01 s
5 s/15 s
(Note 6)
67
Basic functions
9 Electronic thermal O/L relay 0 to 500A 0.01A
Rated output
current
68
10 DC injection brake operation frequency 0 to 120Hz, 9999 0.01Hz 3Hz 69
11 DC injection brake operation time 0 to 10 s, 8888 0.1 s 0.5 s 69
12 DC injection brake voltage 0 to 30% 0.1% 4%/2% (Note 6) 69
13 Starting frequency 0 to 60Hz 0.01Hz 0.5Hz 70
14 Load pattern selection (Note 1) 0 to 5 1 0 70
15 Jog frequency 0 to 400Hz 0.01Hz 5Hz 71
16 Jog acceleration/deceleration time
0 to 3600 s/
0 to 360 s
0.1 s/
0.01 s
0.5 s 71
17 MRS input selection 0,2 1 0 72
18 High-speed maximum frequency 120 to 400Hz 0.01Hz 120Hz 72
19 Base frequency voltage (Note 1) 0 to 1000V, 8888, 9999 0.1V 9999
〈
8888
〉
72
20
Acceleration/deceleration reference
frequency
1 to 400Hz 0.01Hz 60Hz
〈
50Hz
〉
72
21
Acceleration/deceleration time
increments
0,1 1 0 72
22 Stall prevention operation level 0 to 200%, 9999 0.1% 150% 73
23
Stall prevention operation level at double
speed
0 to 200%, 9999 0.1% 9999 73
24 Multi-speed setting (speed 4) 0 to 400Hz, 9999 0.01Hz 9999 74
25 Multi-speed setting (speed 5) 0 to 400Hz, 9999 0.01Hz 9999 74
26 Multi-speed setting (speed 6) 0 to 400Hz, 9999 0.01Hz 9999 74
27 Multi-speed setting (speed 7) 0 to 400Hz, 9999 0.01Hz 9999 74
28 Multi-speed input compensation 0, 1 1 0 74
29 Acceleration/deceleration pattern 0, 1, 2, 3 1 0 75
30 Regenerative function selection 0, 1, 2 1 0 76
31 Frequency jump 1A 0 to 400Hz, 9999 0.01Hz 9999 77
32 Frequency jump 1B 0 to 400Hz, 9999 0.01Hz 9999 77
33 Frequency jump 2A 0 to 400Hz, 9999 0.01Hz 9999 77
34 Frequency jump 2B 0 to 400Hz, 9999 0.01Hz 9999 77
35 Frequency jump 3A 0 to 400Hz, 9999 0.01Hz 9999 77
36 Frequency jump 3B 0 to 400Hz, 9999 0.01Hz 9999 77
Standard operation functions
37 Speed display 0,1 to 9998 1 0 78
41 Up-to-frequency sensitivity 0 to 100% 0.1% 10% 79
42 Output frequency detection 0 to 400Hz 0.01Hz 6Hz 79
Output
terminal
functions
43
Output frequency detection for reverse
rotation
0 to 400Hz, 9999 0.01Hz 9999 79
44 Second acceleration/deceleration time
0 to 3600 s/
0 to 360 s
0.1 s/0.01 s 5 s 80
45 Second deceleration time
0 to 3600 s/0 to 360 s,
9999
0.1 s/0.01 s 9999 80
46 Second torque boost (Note 1) 0 to 30%, 9999 0.1% 9999 80
47 Second V/F (base frequency) (Note 1) 0 to 400Hz, 9999 0.01Hz 9999 80
48 Second stall prevention operation current 0 to 200% 0.1% 150% 80
49
Second stall prevention operation
frequency
0 to 400Hz, 9999 0.01 0 80
Second functions
50 Second output frequency detection 0 to 400Hz 0.01Hz 30Hz 81
Parameter List