Instruction manual

10
INSTALLATION AND WIRING (FR-A700/F700 SERIES)
(3) For wiring of the FR-A700 series 22K* or less and the FR-F700 series 30K* or less, route wires between
the control circuit terminal block and front cover. If cables can not be routed between the control circuit
terminal block and front cover due to the increased number of cables, remove a hook of the front cover
and use a space become available.
For wiring of the FR-A
700 series 30K* or more and the FR-F700 series 37K* or more, use the space
on the left side of the control circuit terminal block.
*The inverter type of 22K and 30K of FR-A700 series, 30K and 37K of FR-F700 series in each -NA, -EC versions are as follows.
NA EC
A700
FR-A720-22K FR-A720-00900-NA ⎯
FR-A740-22K FR-A740-00440-NA (FR-A760-00330-NA) FR-A740-00620-EC
FR-A720-30K FR-A720-01150-NA ⎯
FR-A740-30K
FR-A740-00570-NA (FR-A760-00550-NA) FR-A740-00770-EC
F700
FR-F720-30K FR-F720-01250-NA ⎯
FR-F740-30K FR-F740-00620-NA FR-F740-00620-EC
FR-F720-37K FR-F720-01540-NA ⎯
FR-F740-37K FR-F740-00770-NA FR-F740-00770-EC
Cut off a hook on the inverter
front cover side surface.
(Cut off so that no portion is left.)
Cut off
with a
nipper,
etc.
Control circuit
terminal block
FR-A700 series 22K* or less
and FR-F
700 series 30K* or less
FR-A
700 series 30K* or more
and FR-F700 series 37K* or more