Instruction manual
12
3
INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
3.1 Pre-Installation Instructions
Make sure that the input power of the inverter is off.
3.2 Installation Procedure
The FR-E700 series has one connection connector for the plug-in option.
CAUTION
With input power on, do not install or remove the plug-in option. Otherwise, the inverter and
plug-in option may be damaged.
For prevention of damage due to static electricity, touch nearby metal before touching this
product to eliminate static electricity from your body.
CAUTION
• Always perform wiring to the main circuit terminals and control circuit terminals before installing the
option. Wiring cannot be performed after installing the option.
• When the inverter cannot recognize that the option is mounted due to improper installation, etc., " "
(option alarm) is displayed.
• Take care not to drop a mounting screws during mounting and removal.
• Pull out the option straight to remove. Otherwise, the connector may be damaged.