Instruction manual

INSTALLATION AND WIRING (FR-E700 SERIES (E kit))

z For FR-E720-3.7K (FR-E720-175) or less, FR-E740-7.5K (FR-E740-170) or less

(1) Remove the front cover from the inverter. (For removing the front cover, refer to the FR-E700 series

instruction manual.)

(2) Remove the PU cover from the front cover. Open the PU cover with a driver, etc. and remove it in the

direction of arrow as shown below.

REMARKS

• Because the voltage class, model name and serial (only voltage class is labeled for the FR-E740-5.5K (FR-E740-

120) or more) are stated on the PU cover, replace a PU cover of a plug-in option front cover with the removed PU

cover from the inverter.

(1) Front cover

(2) PU cover

* Open the PU cover, then open it toward the arrow

direction to remove.