Instruction manual

INSTALLATION AND WIRING (FR-E700 SERIES (E kit))

(3) Install the option protective cover.

(4) Correctly install the insulating sheet between the inverter and plug-in option. (Refer to page 15 for

installation method of an insulation sheet.)

(5) Securely fit the connector of the plug-in option to the inverter connector along the guides.

(6) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory mounting

screws.(tightening torque 0.45N⋅m to 0.55N⋅m) If the screw holes do not line-up, the connector may not

have been plugged snugly. Check for loose plugging.

(7) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,

which was removed in (2).

(8) When wiring to the plug-in option is completed, install the front cover for plug-in option to the inverter.

(6)

Mounting screws

Front cover

for plug-in option

plug-in option

(8)

(7) Replace

(3) Option protective cover

Option connector

of inverter

(5)

Insulation sheet

(Available only

for FR-A7AR)

(4)