Instruction manual

16
INSTALLATION AND WIRING (FR-E700 SERIES (E kit))
z For FR-E720-5.5K (FR-E720-240) or more, FR-E740-11K (FR-E740-230) or more
(1) Remove the front cover 1 and 2 from the inverter. (For removing the front cover, refer to the FR-E700
series instruction manual.)
(2) Remove the PU cover from the front cover 2. For removing the PU cover, refer to page 13.
(3) Cut off the dummy cover of the front cover 1 with a nipper, etc. and make a space for installing the
option small cover.
REMARKS
• Because voltage is stated on the PU cover, replace a PU cover of a plug-in option front cover with the removed PU
cover from the inverter.
Front cover 1
Dummy cover
Cut off the edges so that no burr is left.
Front cover 2
(1)
(2)
(3)
PU cover
(1)