Instruction manual

INSTALLATION AND WIRING (FR-E700 SERIES (E kit))

(4) Correctly install the insulating sheet between the inverter and plug-in option. (Refer to page 15 for

installation method of an insulation sheet.)

(5) Securely fit the connector of the plug-in option to the inverter connector along the guides.

(6) Securely fix the both top and bottom of the plug-in option to the inverter with the accessory mounting

screws. (tightening torque 0.45N⋅m to 0.55N⋅m) If the screw holes do not line-up, the connector may

not have been plugged snugly. Check for loose plugging.

(7) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,

which was removed in (2).

(8) When wiring to the plug-in option is completed, install the front cover for plug-in option to the inverter.

(9) Install the option small cover to the front cover 1.

(10) Install the front cover 1 to the inverter.

(5) Option connector of inverter

(6) Mounting screws

Front cover for

plug-in option

(8)

Option small cover

(9)

(10)

(4)

(7) Replace

Insulation sheet