Instruction manual

23
RELAY OUTPUT
4
4.4 Output Signal List (FR-A700/F700 series)
For details of signal definitions, refer to Pr. 190 to Pr. 196 (Output terminal function selection) of the inverter
(FR-A700/F700 series) manual.
Setting
Signal
Name
Function
Positive
logic
0 RUN Inverter running
1 SU Up to frequency
2IPF
Instantaneous power failure/
undervoltage
3 OL Overload alarm
4 FU Output frequency detection
5 FU2 Second output frequency detection
6 FU3 Third output frequency detection *1
7 RBP Regenerative brake prealarm *2
8THP Electronic thermal relay function prealarm
10 PU PU operation mode
11 RY Inverter operation ready
12 Y12 Output current detection
13 Y13 Zero current detection
14 FDN PID lower limit
15 FUP PID upper limit
16 RL PID forward/reverse rotation output
17 MC1 Electronic bypass MC1
18 MC2 Electronic bypass MC2
19 MC3 Electronic bypass MC3
20 BOF Brake opening request *1
25 FAN Fan fault output
26 FIN Heatsink overheat pre-alarm
27 ORA Orientation completion *1
28 ORM Orientation fault *1
30 Y30 Forward rotation output *1
31 Y31 Reverse rotation output *1
32 Y32 Regenerative status output *1
33 RY2 Operation ready 2 *1
34 LS Low speed output *1
35 TU Torque detection *1
36 Y36 In-position *1
39 Y39 Start-time tuning completion signal *1
41 FB Speed detection *1
42 FB2 Second speed detection *1
43 FB3 Third speed detection *1
44 RUN2 Inverter running 2 *1
45 RUN3 Inverter running and start command is on
46 Y46
During deceleration at occurrence of
power failure (retained until release)
Setting
Signal
Name
Function
Positive
logic