Specifications

20
4 INVERTER SETTING
4.1 Parameter List
The following parameters are used for the communication option (FR-A7ND)
Set the values according to need.
*1 Parameters which can be displayed when the plug-in option (FR-A7ND) is mounted.
*2 The setting is reflected after inverter reset or at the next power-ON.
Parameter
Number
Name Setting Range
Minimum
Setting
Increments
Initial
Value
Refer to
Page
79 Operation mode selection 0 to 4, 6, 7 1 0 26
338 Communication operation command source 0, 1 1 0 30
339 Communication speed command source 0, 1, 2 1 0 30
340 Communication startup mode selection 0, 1, 10 1 0 26
342 Communication EEPROM write selection 0, 1 1 0 33
345
*1 DeviceNet address 0 to 4095 1 63 22
346
*1 DeviceNet baud rate 0 to 4095 1 132 23
349
*1 Communication reset selection 0, 1 1 0 41
500
*1 Communication error execution waiting time 0 to 999.8s 0.1s 0 34
501
*1
Communication error occurrence count
display
01035
502
*2 Stop mode selection at communication error 0, 1, 2, 3 1 0 36
550
*2
NET mode operation command source
selection
0, 2, 9999 1 9999 29