Specifications

28
INVERTER SETTING
(3) Operation mode switching method
For the switching method with the external terminal, refer to the Instruction Manual of the inverter.
Refer to page 73 for a switching method through the network.
CAUTION
• When starting the inverter in network operation mode at power-ON or an inverter reset, set a value other
than 0 in Pr. 340. (Refer to page 26)
• When setting a value other than 0 in Pr. 340, make sure that the initial settings of the inverter are correct.
Press on
the PU to light
Switching through the network
Switch to network operation
mode
through the network.
Switch to external
operation mode through
the network.
External operation
Switching with the PU
Network operation PU operation
Network operation PU operation
Press on
the PU to light
When "0 or 1" is set in Pr. 340
When "10" is set in Pr. 340
Press on the PU to light
Press on the PU to light